The present study aims to evaluate the competitive biosorption of lead, cadmium, copper, and arsenic ions by using native algae. A series of experiments were carried out in a batch reactor to obtain equilibrium data for adsorption of single, binary, ternary, and quaternary metal solutions. The biosorption of these metals is based on ion exchange mechanism accompanied by the release of light metals such as calcium, magnesium, and sodium. Experimental parameters such as pH, initial metal concentrations, and temperature were studied. The optimum pH found for removal were 5 for Cd2+ and As3+ and 3 and 4 for Pb2+ and Cu2+, respectively. Fourier transformation infrared spectroscopy analysis was used to find the effects of functional groups of algae in biosorption process. The results showed that Pb2+ made a greater change in the functional groups of algal biomass due to high affinity to this metal. An ion exchange model was found suitable for describing the biosorption process. The affinity constants sequence calculated for single system was KPb > KCu > KCd > KAs; these values reduced in binary, ternary, and quaternary systems. In addition, the experimental data showed that the biosorption of the four metals fitted well the pseudo-second-order kinetics model.
Magnesium/aluminum layered double hydroxide (LDH) nanoparticles were synthesized by hydrolyzing urea and used to remove metronidazole (MN) from aqueous solution. The surface morphology images of the LDH nanoparticles showed that the adsorbent surface consisted of hexagonal nanosheets with a diameter of 200–1000nm. The MN removal efficiency was strongly dependent on the solution pH ranging from 3 to 9. The addition of nitrate, sulfate, and carbonate did not remarkably affect MN adsorption, while hardness slightly improved MN removal efficiency. The adsorption isotherm data could be well described using the Sips equation. The analysis of kinetic data showed that the adsorption of MN onto LDH closely followed the Avrami model and that several kinetic processes may control the rate of sorption. The adsorption process was non-spontaneous and exothermic in nature. The maximum Langmuir adsorption capacity was 62.804mg/g, demonstrating that LDH is an efficient adsorbent that can be used for the removal of MN compounds