This work explores a sustainable route for producing recycled AlNiCo-based magnetic composites by incorporating end-of-life AlNiCo-5 particles into a polyamide 12 (PA12) matrix, thereby eliminating conventional debinding requirements. The study emphasizes material circularity through the reuse of mechanically recovered magnetic waste and polymeric residues. Virgin PA12 powder was used as the matrix material for high magnetic filler loadings of 40, 60, and 70 wt.% AlNiCo-5, while stearic acid was introduced to enhance interfacial compatibility and overall processability. The resulting composites were shaped into filaments and processed via material extrusion additive manufacturing, demonstrating that commercially available fused filament fabrication systems can successfully handle highly filled metal-polymer blends when supported by appropriate formulation and process parameter optimization. The findings confirm the feasibility of manufacturing flexible, functional, and resource-efficient magnetic components using widely accessible equipment, highlighting a promising pathway toward the cost-effective recycling and reuse of AlNiCo magnetic materials.
The need for reliable preventive medicine tools is growing, especially for diseases with long diagnostic delays, such as endometriosis, which can take several years to diagnose. In this context, cellulose acetate nanofibrous membranes were prepared via electrospinning, to create the absorbent core of a smart wearable in the form of a sanitary pad, intended to support electronic diagnostic devices. A multi-layered structure was opted for, with each layer acting in a specific way according to its position within the pad, regarding mainly absorbency and porosity. The membranes were ultralight and highly absorbent, with single membranes showing an absorbency of 20–70 times their initial weight, and multi-layered membranes 15–30 times. Morphological evaluation of the pad was used as the basis for the optimization of the fabrication parameters, while liquid absorption capacity confirmed the pad’s high absorbency. Additionally, chemical and toxicological assessments indicated in vitro biocompatibility of the pad. The potential of the electrospinning process in the fabrication of menstrual hygiene pads is shown by these results. Future studies should focus on the integration of smart devices within the pad, as well as their functionality and effectiveness.