Tiziano Di Giulio

Dr. Tiziano Di Giulio

Università del Salento (Lecce, Italy)
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 July 2021 in ACS Applied Nano Materials
Verified
Journal Article
Open access
EMElisabetta Mazzotta
Elisabetta Mazzotta
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
VMValentina Mastronardi
Valentina Mastronardi
Pier Paolo PompaPier Paolo Pompa
Pier Paolo Pompa
MMMauro Moglianetti
Mauro Moglianetti
CMCosimino Malitesta
Cosimino Malitesta
Size-tunable platinum nanoparticles (PtNPs) prepared by a facile method in an aqueous environment without the use of catalyst-poisoning reagents are used here in the electrocatalytic detection of hydrogen peroxide. Spherical nanoparticles with sizes as small as 4 and 20 nm are obtained as shown by transmission electron microscopy (TEM) analysis only using small easy-to-remove molecules such as sodium citrate. PtNPs are freed from the citrate capping agent at the surface by changing the pH to basic values and then deposited on a glassy carbon electrode by a very simple and rapid drop-casting method, achieving high cleanliness of the nanoparticle surface without the need for further treatments. The superior quality of nanoparticles on the glassy carbon is further investigated by scanning electron microscopy (SEM) analysis, which shows a highly homogeneous distribution of well-dispersed nanoparticles on the electrode surface, as well as by X-ray photoelectron spectroscopy (XPS) analysis, which confirms a drastic decrease of the citrate content, providing useful information about the citrate–platinum interaction, and evidences a related remarkable increase of conductivity of capping-free washed nanoparticles. Due to such key features, PtNPs possess excellent electrocatalytic properties, which have been tested in hydrogen peroxide electroreduction, a well-known catalytic reaction of nanostructured platinum materials. The size effect on PtNPs electrocatalytic properties is demonstrated, achieving higher performances with smaller NPs in the amperometric detection of hydrogen peroxide at −0.1 V in the concentration range of 25–750 μM, with a detection limit of 10 μM. Good sensing results toward hydrogen peroxide have also been obtained in terms of sensitivity, selectivity, repeatability, stability, and in tests performed in tap water samples. In addition, the strong adhesion of nanoparticles to the electrode surface has been verified and ascribed to their coating-free surface.

23 December 2020 in Biosensors
Verified
Journal Article
Open access
PDF file
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
EMElisabetta Mazzotta
Elisabetta Mazzotta
CMCosimino Malitesta
Cosimino Malitesta
Herein we report the electropolymerization of a scopoletin based molecularly imprinted polymer (MIP) for the detection of lysozyme (Lyz), an enzymatic marker of several diseases in mammalian species. Two different approaches have been used for the imprinting of lysozyme based, respectively, on the use of a monomer-template mixture and on the covalent immobilization of the enzyme prior to polymer synthesis. In the latter case, a multi-step protocol has been exploited with preliminary functionalization of gold electrode with amino groups, via 4-aminothiophenol, followed by reaction with glutaraldehyde, to provide a suitable linker for lysozyme. Each step of surface electrode modification has been followed by cyclic voltammetry and electrochemical impedance spectroscopy, which has been also employed to test the electrochemical responses of the developed MIP. The sensors show good selectivity to Lyz and detect the enzyme at concentrations up to 292 mg/L (20 μM), but with different performances, depending on the used imprinting approach. An imprinting factor equal to 7.1 and 2.5 and a limit of detection of 0.9 mg/L (62 nM) and 2.1 mg/L (141 nM) have been estimated for MIPs prepared with and without enzyme immobilization, respectively. Competitive rebinding experiment results show that this sensing material is selective for Lyz determination. Tests were performed using synthetic saliva to evaluate the potential application of the sensors in real matrices for clinical purposes.

Verified
Journal Article
Open access
PDF file
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
GBGiuseppe De Benedetto
Giuseppe De Benedetto
Nicoletta DitarantoNicoletta Ditaranto
Nicoletta Ditaranto
CMCosimino Malitesta
Cosimino Malitesta
EMElisabetta Mazzotta
Elisabetta Mazzotta
The present study employs X-ray photoelectron spectroscopy (XPS) to analyze plastic samples subjected to degradation processes with the aim to gain insight on the relevant chemical processes and disclose fragmentation mechanisms. Two model plastics, namely polystyrene (PS) and polyethylene (PE), are selected and analyzed before and after artificial UV radiation-triggered weathering, under simulated environmental hydrodynamic conditions, in fresh and marine water for different time intervals. The object of the study is to identify and quantify chemical groups possibly evidencing the occurrence of hydrolysis and oxidation reactions, which are the basis of degradation processes in the environment, determining macroplastic fragmentation. Artificially weathered plastic samples are analyzed also by Raman and FT-IR spectroscopy. Changes in surface chemistry with weathering are revealed by XPS, involving the increase in chemical moieties (hydroxyl, carbonyl, and carboxyl functionalities) which can be correlated with the degradation processes responsible for macroplastic fragmentation. On the other hand, the absence of significant modifications upon plastics weathering evidenced by Raman and FT-IR spectroscopy confirms the importance of investigating plastics surface, which represents the very first part of the materials exposed to degradation agents, thus revealing the power of XPS studies for this purpose. The XPS data on experimentally weathered particles are compared with ones obtained on microplastics collected from real marine environment for investigating the occurring degradation processes.

11 October 2022 in Antioxidants
Verified
Journal Article
Open access
PDF file
FSFilippo Silveri
Filippo Silveri
FPFlavio Della Pelle
Flavio Della Pelle
ASAnnalisa Scroccarello
Annalisa Scroccarello
EMElisabetta Mazzotta
Elisabetta Mazzotta
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
Dario CompagnoneDario Compagnone
Dario Compagnone
A new sustainable route to nanodispersed and functionalized carbon black in water phase (W-CB) is proposed. The sonochemical strategy exploits ultrasounds to disaggregate the CB, while two selected functional naturally derived compounds, sodium cholate (SC) and rosmarinic acid (RA), act as stabilizing agents ensuring dispersibility in water adhering onto the CB nanoparticles’ surface. Strategically, the CB-RA compound is used to drive the AuNPs self-assembling at room temperature, resulting in a CB surface that is nanodecorated; further, this is achieved without the need for additional reagents. Electrochemical sensors based on the proposed nanomaterials are realized and characterized both morphologically and electrochemically. The W-CBs’ electroanalytical potential is proved in the anodic and cathodic window using caffeic acid (CF) and hydroquinone (HQ), two antioxidant compounds that are significant for food and the environment. For both antioxidants, repeatable (RSD ≤ 3.3%; n = 10) and reproducible (RSD ≤ 3.8%; n = 3) electroanalysis results were obtained, achieving nanomolar detection limits (CF: 29 nM; HQ: 44 nM). CF and HQ are successfully determined in food and environmental samples (recoveries 97–113%), and also in the presence of other phenolic classes and HQ structural isomers. The water dispersibility of the proposed materials can be an opportunity for (bio) sensor fabrication and sustainable device realization.

24 May 2023 in Small
Verified
Journal Article
Open access
EMElisabetta Mazzotta
Elisabetta Mazzotta
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
SMStefano Mariani
Stefano Mariani
MCMartina Corsi
Martina Corsi
CMCosimino Malitesta
Cosimino Malitesta
Giuseppe BarillaroGiuseppe Barillaro
Giuseppe Barillaro
Molecularly imprinted polymers (MIPs) have recently emerged as robust and versatile artificial receptors. MIP synthesis is carried out in liquid phase and optimized on planar surfaces. Application of MIPs to nanostructured materials is challenging due to diffusion‐limited transport of monomers within the nanomaterial recesses, especially when the aspect ratio is >10. Here, the room temperature vapor‐phase synthesis of MIPs in nanostructured materials is reported. The vapor phase synthesis leverages a >1000‐fold increase in the diffusion coefficient of monomers in vapor phase, compared to liquid phase, to relax diffusion‐limited transport and enable the controlled synthesis of MIPs also in nanostructures with high aspect ratio. As proof‐of‐concept application, pyrrole is used as the functional monomer thanks to its large exploitation in MIP preparation; nanostructured porous silicon oxide (PSiO2) is chosen to assess the vapor‐phase deposition of PPy‐based MIP in nanostructures with aspect ratio >100; human hemoglobin (HHb) is selected as the target molecule for the preparation of a MIP‐based PSiO2 optical sensor. High sensitivity and selectivity, low detection limit, high stability and reusability are achieved in label‐free optical detection of HHb, also in human plasma and artificial serum. The proposed vapor‐phase synthesis of MIPs is immediately transferable to other nanomaterials, transducers, and proteins.

6 August 2025 in Biosensors
Verified
Journal Article
Open access
PDF file
MAMuhammad Asif
Muhammad Asif
Tiziano Di GiulioTiziano Di Giulio
Tiziano Di Giulio
FGFrancesco Gagliani
Francesco Gagliani
CMCosimino Malitesta
Cosimino Malitesta
EMElisabetta Mazzotta
Elisabetta Mazzotta
Molecularly imprinted polymers (MIPs) have emerged as robust, cost-effective analogues of bioreceptors, offering high selectivity and stability. When applied in sensors, one key step is the integration of MIPs with the transducer, which critically affects sensor performance. Demanding challenges come when such integration involves nanoscaling processes, meaning that the transducer is nanostructured or the MIP itself is nanosized on a bulk transducer. In both cases, the integration results in the development of nanosensors, with advantages arising from the nanoscale, such as a high MIP surface-to-volume ratio, with surface-located, easily accessible binding sites, fast binding kinetics, and, thus, a rapid sensor response. Major advantages come also from nanostructured transducers, with nanoscale geometry enabling highly sensitive signal generation processes, not allowed on their bulk counterparts. In this review, we discuss advances in imprinting technologies, focusing on techniques that, enabling the nanoscale control of MIP synthesis, are conveniently applied to directly integrate MIPs with nanosensors in a one-step process. Two main approaches are reviewed, consisting in MIP nanostructuring on bulk transducers and in the direct growth of MIPs on nanotransducers, highlighting how different strategies achieve good conformity at the nanoscale and address spatial complexity to ensure stable and accurate signal acquisition. Finally, we consider future directions in MIP-based nanosensor development.