The development of durable and eco-friendly coatings with excellent adhesion and remarkable surface properties remains a critical pursuit in various industries. This study introduces an innovative methodology for the synthesis of glycidyl methacrylate-co-fluorinated methacrylate (P(GMA-co-FMA)) random copolymers with variable fluorine contents derived from GMA and FMA monomers. The copolymerization of these constituents yields coatings with enhanced durability and unique surface characteristics. Particularly, the incorporation of FMA introduces novel surface functionalities, leading to high water and oil repellent properties. The copolymer-coated surfaces exhibited impressive water contact angles ranging from 105° to 125° and decane contact angles ranging from 50° to 85°. The wettability of the P(GMA-co-FMA) coatings demonstrated a strong dependence on the fluorine content in the copolymers, with higher fluorine content resulting in superior water and oil repellency. Through a comprehensive characterization, we demonstrate the exceptional adhesion and self-cleaning capabilities of the fabricated films. Notably, the self-cleaning efficacy of P(GMA-co-FMA)-coated surfaces persists even following a prolonged duration of 6 months. Furthermore, our investigation reveals the influence of copolymer composition on surface wettability and contact angle hysteresis, providing valuable insights for tailoring coating properties. Overall, the novelty of this study lies in the synthesis of P(GMA-co-FMA) copolymer coatings with superior adhesion and self-cleaning properties. These advancements present promising applications in various fields, including electronics, textiles, and medical supplies, where such durable and functional coatings can significantly enhance product performance and longevity.
20 February 2020 in Journal of Micromechanics and Microengineering
High concentration of carbon monoxide (CO) in the gas mixture entering the fuel cell can cause fuel cell poisoning, which can significantly reduce the life expectancy of the cell. To overcome this problem, we propose a new methodology based on the use of micro-cantilevers to detect minute concentrations of CO in a gas mixture. For this purpose, micro-cantilevers are coated with Copper Y (CuY) zeolite and utilized to selectively adsorb CO on their surface. It is shown that the adsorption of CO yields a measurable shift in the natural frequency of the micro-cantilevers, which can be directly correlated with the concentration of CO in the gas mixture. It is determined that the maximum adsorption capacity of the sensor occurs at 40 °C using CuY zeolite with 10 wt% Cu content. Furthermore, the shift in the natural frequency of the sensor is observed to increase as the thickness of the zeolite layer is increased up to a threshold value corresponding to about a quarter of the thickness of the micro-cantilever. At this point, a clearly measurable shift of about 275 Hz in the natural frequency of the micro-cantilevers is observed. While the maximum frequency shift occurs using a relatively thick zeolite layer, it is observed that, for the range of thicknesses considered, the maximum frequency shift per unit weight of CO adsorbed (sensitivity) decreases as the thickness of the zeolite layer is increased. The methodology proposed in this paper could pave the way towards the development of a portable and self-contained unit to monitor the concentration of CO in a mixture of gases.