M Vishnupriyan

Dr. M Vishnupriyan

Civil Engineering, SR University, Warangal, Telangana, International
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 October 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
M VishnupriyanM Vishnupriyan
M Vishnupriyan
RAR. Annadurai
R. Annadurai
KOKennedy C. Onyelowe
Kennedy C. Onyelowe
George Uwadiegwu AlanemeGeorge Uwadiegwu Alaneme
George Uwadiegwu Alaneme
NGNimay Chandra Giri
Nimay Chandra Giri
The present investigation aims to examine the mechanical and durability properties of concrete that has been reinforced with a waste printed circuit board (WPCB) towards a low-carbon built environment. It assessed the fresh and hardened characteristics of the low-carbon concrete reinforced with WPCB fibres, after a curing period of 7 and 28 days. The evaluation was done by quantifying slump, compressive strength, split tensile strength, flexural strength, sorptivity, rapid, and acid tests. It further analysed eleven discrete concrete mixes with WPCB fibres at a weight percentage ranging from 1 to 5% in the cement mixture. The results indicate that incorporating WPCB fibre into concrete improves its mechanical strength. The results revealed that incorporating 5% WPCB fibre yielded the most favourable outcomes. The properties of WPCB fibre-reinforced concrete have been theoretically validated through Response Surface Methodology (RSM), which employs various statistical and mathematical tools to analyse the experimental data. The results derived from RSM were compared with the experimental results. It was found that the RSM model demonstrated a high level of accuracy (R2≥ 0.98) in validating the mechanical properties of WPCB fibre concrete. The statistical model exhibited no indication of prediction bias and demonstrated a statistically significant outcome, with a p-value below 0.5.

5 February 2023 in Asian Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
M VishnupriyanM Vishnupriyan
M Vishnupriyan
RAR. Annadurai
R. Annadurai

8 November 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SDSelvakumar Duraiswamy
Selvakumar Duraiswamy
PNPrakhash Neelamegam
Prakhash Neelamegam
M VishnupriyanM Vishnupriyan
M Vishnupriyan
George Uwadiegwu AlanemeGeorge Uwadiegwu Alaneme
George Uwadiegwu Alaneme
This study explores the mechanical and durability properties of Plastic-Fibre Reinforced Concrete, incorporating hand-shredded plastic fibers sourced from polyethylene bags and PET bottles. Evaluations, including compressive and split tensile strength tests, were conducted on M40 grade mixes containing plastic fibers and 100% treated Construction and Demolition Waste (CDW), comparing them with conventional concrete. The results demonstrate a significant enhancement in strength properties with the addition of 0.25%, 0.5%, 0.75%, and 1% plastic-fibres, alongside the complete replacement of coarse aggregate with CDW, particularly noticeable at both 7 and 28-day curing ages. Although higher fiber dosages led to a slight reduction in compressive by 7% at the optimum percentage of 0.25% of PE and 0.5% of PET, the flexural strengths and split tensile strength exhibited a proportional increase of 11.7% and 18%. Surface analysis via Scanning Electron Microscopy (SEM) and elemental composition determination using Energy Dispersive Spectroscopy (EDS) revealed minimal fiber damage post-exposure, confirming its efficiency and contribution to higher strength and reduced weight loss in optimum mix. This novel approach combines manually recycled plastic waste as fibers with treated CDW, enhancing concrete properties while promoting sustainability. Sustainability analysis indicates that utilizing 100% CDW and plastic fiber contributes to reduced energy consumption, lower carbon emissions, and economic benefits. These findings underscore the potential of integrating non-degradable plastics into concrete mixtures, combined with treated CDW, offering both environmental sustainability and enhanced performance advantages in construction materials.

20 December 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
M VishnupriyanM Vishnupriyan
M Vishnupriyan
RAR. Annadurai
R. Annadurai
George Uwadiegwu AlanemeGeorge Uwadiegwu Alaneme
George Uwadiegwu Alaneme
DRDurga Prasad Ravella
Durga Prasad Ravella
SPS. Pradeepkumar
S. Pradeepkumar
BOBamidele Charles Olaiya
Bamidele Charles Olaiya
This research goal is to appraise the effect of electronic waste on concrete properties by examining the mechanical properties of concrete reinforced with waste printed circuit boards (PCBs). PCB fibres, each 50 mm long, were mixed in varying proportions (1–5% by weight of cement). Silica fume (SF) was used as a 12% weight replacement for cement to conserve the properties of PCB fibre-reinforced concrete while tumbling cement consumption. Following a 28-day curing period, the fresh and hardened characteristics of PCB fibre-reinforced concrete were juxtaposed with those of conventional concrete. The experimental results led to the conclusion that 5% by weight of cement is the most effective proportion of PCB fibres to include in both PCB fibre-reinforced concrete and silica fume-modified PCB fibre-reinforced concrete. The addition of PCB fibres and silica fume significantly increased the mechanical strength of the concrete, making it suitable for high-strength concrete applications. Based on a similar investigational research design, an artificial neural network model was created, and it played a critical role in predicting the mechanical properties of the concrete. The model produced accurate results, with an R-squared (R2) value greater than 0.99.

26 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KOKennedy Chibuzor Onyelowe
Kennedy Chibuzor Onyelowe
VKViroon Kamchoom
Viroon Kamchoom
Ahmed M. EbidAhmed M. Ebid
Ahmed M. Ebid
SHShadi Hanandeh
Shadi Hanandeh
JLJosé Luis Llamuca Llamuca
José Luis Llamuca Llamuca
SASiva Avudaiappan
Siva Avudaiappan
The optimization of metakaolin (MK) in pre-cured geopolymer concrete involves developing predictive models to capture the interplay of various influencing factors and guide mix design for improved compressive strength and sustainability. Ensemble methods and symbolic regression are promising approaches for this task due to their complementary strengths and solving challenges associated with repeated experiments in the laboratory. Choosing machine learning predictions over repeated, expensive, and time-consuming experiments in research projects, such as optimizing the utilization of metakaolin in pre-cured geopolymer concrete, presents a paradigm shift in how data-driven insights can revolutionize material development. The integration of ensemble and symbolic regression models enables researchers to derive valuable predictions and optimize critical performance parameters efficiently. In this research work, 235 records were collected from extensive literature search for compressive strength for different mixing ratios of pre-cured metakaolin-based geopolymer concrete with concrete at different ages. Each record contains MK: The content of metakaolin (kg/m3), SHS: Sodium hydroxide solution content (kg/m3), SHSM: Sodium hydroxide solution molarity (Mole), SSS: Sodium silicate solution content (kg/m3), W: Extra water content (not including the water in alkaline solutions) (kg/m3), W/S: Water to Solid ratio (Total water content / Solid part of activator solutions + MK), Na2O/Al2O3: Sodium oxide to aluminium oxide ratio, SiO2/Al2O3: Silicon oxide to aluminium oxide ratio, H2O/Na2O: Water to Sodium oxide ratio, CA/FA: Coarse to Fine aggregate ratio, CAg: The content of coarse aggregates (kg/m3), SP: The content of super-plasticizer (kg/m3), PCC: 0 for no pre-curing, 1 for pre-curing at 60 °C, and 2 for pre-curing at 80 °C, CT: Curing temperature (°C), Age: The concrete age at testing (days) and CS: Compressive strength (MPa). The collected records were portioned into training set (180 records≈75%) and validation set (55 records≈ 25%) and modeled with ensemble and symbolic regression methods. At the end of the model work, performance metrics were used to evaluate the models’ ability and Hoffman and Gardener’s sensitivity analysis was used to evaluate the impact of the variables on the compressive strength of the pre-cured geopolymer concrete mixed with metakaolin. GB and KNN models became the decisive models with excellent performance which outclassed others and the sensitivity analysis indicated that SHSM, SSS, W/S, and Na2O/Al2O3 are the most influential to the predicted compressive strength.

21 February 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
TSThunuguntla Chaitanya Srikrishna
Thunuguntla Chaitanya Srikrishna
VNVenkatesh Noolu
Venkatesh Noolu
BRB. Sudheer Kumar Reddy
B. Sudheer Kumar Reddy
George Uwadiegwu AlanemeGeorge Uwadiegwu Alaneme
George Uwadiegwu Alaneme
RPRavella Durga Prasad
Ravella Durga Prasad
M VishnupriyanM Vishnupriyan
M Vishnupriyan
Geopolymer concrete (GPC) is an eco-friendly alternative to traditional cement concrete and has sparked widespread interest due to its potential to reduce CO2 emissions. However, its mechanical performance, notably stress–strain behaviour for plain concrete and fiber reinforced concrete, has been a significant topic for development over the last few decades. This study examines the mechanical and stress–strain parameters of geopolymer concrete reinforced with alkali-resistant glass fibers with varying aspect ratios (444, 963) and volume fractions (0%, 0.1%, 0.2%, 0.3% and 0.4% by vol. of concrete). A series of experimental tests were conducted on geopolymer concrete viz. split tensile strength, compressive strength, flexural strength, and stress vs strain behavior of GPC. To examine the influence of fibers, binder content, aggregate proportions, and alkaline activator solution dosage were all kept constant. The obtained results indicate that the addition of alkali resistant glass fibers improved the mechanical strengths significantly, with optimal performance at 0.3% of fiber volume. The stress vs strain curves of fiber-reinforced specimens revealed enhanced ductility. An equation was proposed to generate the stress vs strain curve. The Response Surface Methodology technique was applied to investigate the effect of fiber length and fiber volume on fresh and mechanical characteristics of geopolymer concrete.