Vahid Najafi Moghaddam Gilani

Dr. Vahid Najafi Moghaddam Gilani

Université de Sherbrooke, Sherbrooke, Quebec, Canada
orcid
Ph.D., Postdoctoral Fellow, Université de Sherbrooke, Longue...

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 May 2021 in Mathematical Problems in Engineering
Verified
Journal Article
Open access
PDF file
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
Seyed Mohsen HosseinianSeyed Mohsen Hosseinian
Seyed Mohsen Hosseinian
MGMeisam Ghasedi
Meisam Ghasedi
MNMohammad Nikookar
Mohammad Nikookar
Modeling the severity of accidents based on the most effective variables accounts for developing a high-precision model presenting the possibility of occurrence of each category of future accidents, and it could be utilized to prioritize the corrective measures for authorities. The purpose of this study is to identify the variables affecting the severity of the injury, fatal, and property damage only (PDO) accidents in Rasht city by collecting information on urban accidents from March 2019 to March 2020. In this regard, the multiple logistic regression and the pattern recognition type of artificial neural network (ANN) as a machine learning solution are used to recognize the most influential variables on the severity of accidents and the superior approach for accident prediction. Results show that the multiple logistic regression in the forward stepwise method has R2 of 0.854 and an accuracy prediction power of 89.17. It turns out that the accidents occurred between 18 and 24 and KIA Pride vehicle has the highest effect on increasing the severity of accidents, respectively. The most important result of the logit model accentuates the role of environmental variables, including poor lighting conditions alongside unfavorable weather and the dominant role of unsafe and poor quality of vehicles on increasing the severity of accidents. In addition, the machine learning model performs significantly better and has higher prediction accuracy (98.9) than the logit model. In addition, the ANN models greater power to predict and estimate future accidents is confirmed through performance and sensitivity analysis.

1 January 2020 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
Seyed Mohsen HosseinianSeyed Mohsen Hosseinian
Seyed Mohsen Hosseinian
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
PJPeyman Mehraban Joobani
Peyman Mehraban Joobani
MAMahyar Arabani
Mahyar Arabani
The construction of suitable roads in rainy areas has created problems in the construction process due to the low resistance of asphalt to moisture. To solve this problem, materials are commonly used that make mixtures resistant to moisture; however, these materials may reduce the dynamic resistance of asphalt. Therefore, materials should be used that, in addition to increasing the dynamic resistance, also increase the moisture resistance of asphalt mixtures. One of these materials used in this research is steel wool fiber (SWF), which in addition to creating conductive roads also could have a significant effect on moisture resistance. In this study, the impact of 2%, 4%, 6%, 8%, and 10% SWF on the Marshall stability and moisture sensitivity of mixtures was investigated using the Marshall stability and indirect tensile strength (ITS) tests, respectively. Moreover, using SWF as a conductive fiber, the conductivity properties of asphalt mixtures were explored to find the optimal amount of electrical conductivity. The results of the Marshall stability test indicated that by increasing SWF contents, the stability of mixtures increased, compared with the base sample, and greater amounts of 6% SWF resulted in the reduction of the Marshall stability. The results of ITS showed that modification of bitumen by SWF increased ITS and tensile strength ratio (TSR) amounts of mixtures. 6% SWF was the optimal amount for enhancing the resistance of asphalt mixtures to moisture sensitivity. The results of the electrical resistivity test showed that the resistivity had three phases: high resistivity, transit, and low resistivity. Mixtures containing less than 4% SWF illustrated an insulating behavior, with electrical resistivity greater than 7.62 × 108 Ω.m. At the transit phase, the resistivity of mixtures had a sharp reduction from 7.62 × 108 Ω.m to 6.17 × 104 Ω.m. Finally, 8% SWF was known as the optimal content for the electrical conductivity of mixtures.

9 June 2020 in International Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
HBHamid Behbahani
Hamid Behbahani
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
RSReza Salehfard
Reza Salehfard
DSDaniel Safari
Daniel Safari

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
GHGholam Hossein Hamedi
Gholam Hossein Hamedi
MEMohammad Reza Esmaeeli
Mohammad Reza Esmaeeli
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
Seyed Mohsen HosseinianSeyed Mohsen Hosseinian
Seyed Mohsen Hosseinian
Moisture damage is known to be a key factor influencing the durability of asphalt pavements. This phenomenon will reduce the mechanical properties of asphalt mixtures due to its destructive effects on the adhesion of the bitumen‐aggregate system and the cohesion of the bitumen membrane. The mineral properties of the aggregates of asphalt mixtures are one of the factors affecting moisture susceptibility. Therefore, the surface free energy (SFE) method, as one of the thermodynamic methods, and indirect tensile strength test (ITST) have been used to determine the failure mechanism and the rate of change of adhesion properties of asphalt mixtures under the influence of mineralogical characteristics. Prior to the above tests, an X‐ray fluorescence spectrometry (XRF) test was performed to identify aggregate‐forming minerals in eight different types of aggregates with various minerals from eight mines, and also the apparent bitumen film thickness was measured. XRF test results showed that most parts of the aggregates in mines 1– 6 were composed of SiO2, which had strong acidic properties, according to the SFE results. ITST results showed that samples constructed with aggregates of mine 7 and 8 (with high CaO mineral content) experienced a higher TSR than other mixtures in all freeze‐thaw (F‐T) cycles. Results of the SFE method showed that aggregates with more calcareous properties had a smaller acidic component and a larger basic component. In mines 7 and 8, where the nonpolar component of their aggregates was larger, the tendency of the aggregates to adherence and wettability by water decreased. The adhesion free energy (AFE) between bitumen and aggregates with higher CaO and less SiO2 amounts was more than AFE between bitumen and aggregates with lower CaO and higher SiO2 amounts, in dry conditions. The presence of higher amounts of CaO in aggregates increased AFE of bitumen‐aggregate in presence of water from a negative value to zero. In linear regression analysis, due to the positive regression coefficient of the CaO mineral, this mineral had a positive impact on TSR; on the other hand, due to the negative regression coefficient of the SiO2 mineral, this mineral had a negative impact on the TSR of asphalt mixtures.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
MNMohammad Nikookar
Mohammad Nikookar
MMMojtaba Bagheri Movahhed
Mojtaba Bagheri Movahhed
JAJalal Ayoubinejad
Jalal Ayoubinejad
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
Seyed Mohsen HosseinianSeyed Mohsen Hosseinian
Seyed Mohsen Hosseinian
Moisture sensitivity of asphalt mixtures may cause damage due to cohesion in asphalt binder membrane and adhesion between aggregate and asphalt binder that result in considerable damage to the pavements. Therefore, by determining the adhesion quality in a modified aggregate‐asphalt binder system, one can choose the suitable material compositions to decrease the moisture sensitivity of mixtures. In this study, the effects of modified asphalt binder with carbon nanofiber and modified aggregates with carbon nanotube on the moisture sensitivity of asphalt mixtures were simultaneously explored. For investigating the moisture sensitivity, the indirect tensile strength test and surface free energy concept were implemented. The results of the indirect tensile strength test revealed that modification of asphalt binder and aggregates with carbon nanofiber and carbon nanotube, respectively, increased the indirect tensile strength and tensile strength ratio values of mixtures. The results of surface free energy indicated that using carbon nanofiber and carbon nanotube enhanced the adhesion free energy of the aggregate‐asphalt binder system. Moreover, utilizing carbon nanofiber to modify asphalt binder enhanced the cohesion free energy values in the asphalt binder membrane. Also, carbon nanofiber and carbon nanotube brought detachment energy of the system toward zero, indicating less desire for the mixtures to be stripped. Generally, investigations performed by the two methods showed that covering aggregates by carbon nanotube as well as utilizing carbon nanofiber as an asphalt binder modifier had a positive impact on decreasing moisture sensitivity of asphalt mixtures.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
SASasan Adeli
Sasan Adeli
Vahid Najafi Moghaddam GilaniVahid Najafi Moghaddam Gilani
Vahid Najafi Moghaddam Gilani
MNMohammad Kashani Novin
Mohammad Kashani Novin
EMEhsan Motesharei
Ehsan Motesharei
Reza SalehfardReza Salehfard
Reza Salehfard
The main objective of this paper was to investigate the relationship between PCI and IRI values of the rural road network. To this end, 6000 pavement sections of the rural road network in Iran were selected. Road surface images and roughness linear profiles were collected using an automated car to calculate PCI and IRI, respectively. Three exponential regression models were developed and validated in three different IRI intervals. Analysis of the results indicated that exponential regression was the best model to relate IRI and PCI. In these models, R2 values were found to be acceptable, equal to 0.75, 0.76, and 0.59 for roads with good, fair, and very poor qualities, respectively, indicating a good relationship between IRI and PCI. Moreover, validation results showed that the model had a high accuracy. Also, the relation between IRI and PCI became weaker as a result of increasing the level of road surface roughness, which can be caused by the increase in the number and severity of failures. Furthermore, two failures of rail R.C. and rutting were rarely observed in the studied roads. Therefore, the proposed model is more applicable for roads without the mentioned failures and asphalt‐pavement rural road network.