New technologies are offering progressively more effective alternatives to traditional ones. Additive Manufacturing (AM) is gaining importance in fields related to design, manufacturing, engineering and medicine, especially in applications which require complex geometries. Fused Deposition Modelling (FDM) is framed within AM as a technology in which, due to their layer-by-layer deposition, thermoplastic polymers are used for manufacturing parts with a high degree of accuracy and minimum material waste during the process. The traditional technology corresponding to FDM is Polymer Injection Moulding, in which polymeric pellets are injected by pressure into a mould using the required geometry. The increasing use of PA6 in Additive Manufacturing makes it necessary to study the possibility of replacing certain parts manufactured by injection moulding with those created using FDM. In this work, PA6 was selected due to its higher mechanical properties in comparison with PA12. Moreover, its higher melting point has been a limitation for 3D printing technology, and a further study of composites made of PA6 using 3D printing processes is needed. Nevertheless, analysis of the mechanical response of standardised samples and the influence of the manufacturing process on the polyamide’s mechanical properties needs to be carried out. In this work, a comparative study between the two processes was conducted, and conclusions were drawn from an engineering perspective.
Titanium is one of the most interesting materials in modern manufacturing thanks to its good mechanical properties and light weight. These features make it very attractive for use in the aeronautical and aerospace industries. Important alloys, such as Ti6Al4V, are extensively used. Nevertheless, titanium alloys present several problems in machining processes. Their machinability is poor, affected by low thermal conductivity, which generates very high cutting temperatures and thermal gradients in the cutting tool. Lubricants and cutting fluids have traditionally been used to solve this problem. However, this option is unsustainable as such lubricants represent a risk to the environment and to the health of the operator due to their different chemical components. Therefore, novel, sustainable and green lubrication techniques are necessary. Dry machining is the most sustainable option. Nevertheless, difficult-to-machine materials like titanium alloys cannot be machined under these conditions, leading to very high cutting temperatures and excessive tool wear. This study is intended to describe, analyse and review the non-traditional lubrication techniques developed in turning, drilling and milling processes since 2015, including minimum quantity of lubricant, cryogenic lubrication, minimum quantity of cooling lubrication or high-pressure coolant. The aim is to provide a general overview of the recent advances in each technique for the main machining processes.
1 November 2017 in Construction and Building Materials
This work aims to compare the effectiveness of different machine-learning techniques for the image classification of steel microstructures. For this, we use a set of samples of hypoeutectoid steels subjected to three heat treatments: annealing, quenching and quenching with tempering. Logically, the samples contain the typical constituents expected, and these are different for each treatment. Images are obtained by optical microscopy at 400× magnification and from different low-carbon steels to generate the data with some heterogeneity. Learning models are created with an image dataset for classification into three classes based on the respective heat treatments. Likewise, we develop two kinds of models by using, on the one hand, classical machine-learning methods based on the “bag of features” technique and, on the other hand, convolutional neural networks (CNN) with a transfer-learning approach by using GoogLeNet and ResNet50. We demonstrate the superiority of deep-learning techniques (CNN) over classical machine-learning methods.
Single Point Incremental Forming (SPIF) process has been largely developed for the last ten years due to the multiple advantages that presents as its well known dieless configuration, the larger conformability that can be obtained with it and its flexibility. In spite of that, the process has been experimentally applied to soft-fluent alloys, like aluminium alloys. Herein there are multiple variables taking part and related to the technological parameters, the material conformability and the friction phenomena. These effects have not been sufficiently studied, especially at steel applications. The present work is a part of a future extended research and tries to evaluate in advance the stresses and strains existing in the sheet and in the tool during SPIF of DC-05 steel. A Solidworks® environment has been created to do a FEM Simulation of this process.
Single point incremental forming (SPIF) is a cheap and flexible sheet metal forming process for rapid manufacturing of complex geometries. Additionally, it is important for engineers to measure the surface finish of work pieces to assess their quality and performance. In this paper, a predictive model based on machine learning and computer vision was developed to estimate arithmetic mean surface roughness (Ra) and maximum peak to valley height (Rz) of Ti6Al4V parts obtained by SPIF. An image database was prepared to train different classification algorithms in accordance with a supervised learning approach. A speeded up robust feature (SURF) detector was used to obtain visual vocabulary so that the classifiers are able to group the photographs into classes. The experimental results indicated that the proposed predictive method shows great potential to determine the surface quality, as classifiers based on a support vector machine with a polynomial kernel are suitable for this purpose.
About Me
Full professor In Manufacturing Processes Engineering
Full professor In Manufacturing Processes Engineering