The transformerless inverters for photovoltaic systems are widely used as it features low cost, volume, and weight. Thus, in recent years, its study has been of great interest to the research community. In this paper a transformerless cascade multilevel inverter for photovoltaic applications with leakage ground current compensation capability is presented. The proposed solution involves a second-order LC output filter with a particular connection, which is referred to as the DC-link-tied LC output filter. This solution is aimed to deal with the leakage-ground current issue, regardless of the considered PWM strategy. The mathematical model of the system involving such a particular LC output passive filter configuration is presented, out of which, both the differential-mode and the common-mode models are obtained. These models are used to explain the leakage-ground current improvement of the proposed DC-link-tied LC output filter. This hardware solution is evaluated under different modulation schemes to contrast the converter output response and the leakage-ground current performance. Finally, simulation and experimental results are performed using a 1 kW academic prototype to assess the performance of the proposed DC-link-tied LC output filter used in a transformerless inverter application.
Several industrial applications rely on induction motors to carry out processes essential for product manufacturing. Speed control of an induction motor commonly requires a pulse width modulated inverter capable of driving a system with long cables, suppression of common mode voltage, reduction of common mode current, and suppression of electromagnetic interference. This paper proposes a three-phase motor drive aimed to make constant the common mode voltage. The proposed system consists of two three-phase conventional full bridge inverters connected in parallel and having as an input two separate direct current sources. The proposed system is controlled by using the space vector pulse width modulation technique. By designing the adequate signal sequences of the switches for both converters, it is possible to keep constant the common model voltage and therefore reduce the associated common mode current making the system more reliable. The proposed system is validated through numerical simulations and by the implementation of an experimental prototype. Low common mode current values as low as 83mA are obtained in both simulations and experiments.
Several industrial applications rely on induction motors to carry out processes essential for product manufacturing. Speed control of an induction motor commonly requires a pulse width modulated inverter capable of driving a system with long cables, suppression of common mode voltage, reduction in common mode current, and suppression of electromagnetic interference. This paper proposes a three-phase motor drive aimed at maintaining a constant common-mode voltage. The proposed system consists of two three-phase conventional full bridge inverters connected in parallel and having as an input two separate direct current sources. The proposed system is controlled by using the space vector pulse width modulation technique. By properly designing the switching signal sequences for both converters, the common-mode voltage can be maintained constant, thereby reducing the associated common-mode current to an RMS value of mA and enhancing the overall reliability of the system. The proposed system is validated through numerical simulations and by the implementation of an experimental prototype.