Vladimir Petkov Petkov

Prof. Dr. Vladimir Petkov Petkov

Bulgarian Academy of Sciences, Sofia, Sofia-Grad, Bulgaria
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Sabina ChernevaSabina Cherneva
Sabina Cherneva
VPVladimir Petrunov
Vladimir Petrunov
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
VBVladimir Bogdanov
Vladimir Bogdanov
SSSilviya Simeonova
Silviya Simeonova
The mechanical properties, structure, and morphology of milled and 3D-printed Ti-6Al-4V alloys produced by selective laser melting were investigated in this study. The mechanical properties were investigated by means of nanoindentation, a tensile test, and a three-point bending test. An Atomic Force Microscope (AFM) was used to study the surface topography and roughness of both titanium alloys. The surface structure and phase analyses were studied by a scanning electron microscope (SEM) and through powder X-ray diffraction (XRD). The results from the nanoindentation experiments showed that the 3D-printed sample has higher indentation hardness and modulus than the milled one. The AFM observation of the surface topography of the samples showed that the milled sample has a higher roughness than the 3D-printed one. The tensile test results showed that the 3D-printed sample by means of Selective Laser Melting (SLM) technology has about 26% higher tensile strength and smaller elongation than the milled one. The three-point bending test revealed that the 3D-printed Ti-6Al-4V sample has higher flexural strength than the milled one. It was found that the 3D-printed sample has a smaller crystal size than the milled one, which, according to the Hall–Petch relationship, leads to its higher indentation hardness.

29 April 2025 in Lubricants
Verified
Journal Article
Open access
PDF file
Mihail KolevMihail Kolev
Mihail Kolev
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
VPVeselin Petkov
Veselin Petkov
RDRossitza Dimitrova
Rossitza Dimitrova
SUShaban Uzun
Shaban Uzun
BKBoyko Krastev
Boyko Krastev
Enhancing the durability and tribological performance of babbitt alloys is critical for high-stress applications in automotive, marine, and industrial machinery. The present study explores the electrodeposition of chromium coatings on SnSb11Cu6 alloys to improve their microstructural, mechanical, and tribological properties. The coatings were applied through an electrolytic process and systematically characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy to evaluate their morphology, composition, and wear performance. The chromium coating exhibited a uniform thickness of 20.2 µm and significantly improved the surface hardness to 715.2 HV, far surpassing the matrix and intermetallic phases of the uncoated alloy. Tribological testing under dry sliding conditions demonstrated a 44% reduction in the coefficient of friction (COF) and a 54% decrease in mass wear for the coated alloy, highlighting the protective role of the chromium layer against abrasive and adhesive wear. To further analyze the frictional behavior, a deep learning model based on a one-dimensional convolutional neural network was employed to predict COF trends over time, achieving excellent accuracy with R2 values of 0.9971 for validation and 0.9968 for testing. Feature importance analysis identified coating hardness as the most critical factor influencing COF and wear resistance, followed by matrix hardness near the coating. These findings underscore the effectiveness of chromium coatings in mitigating wear damage and improving the operational lifespan of SnSb11Cu6 alloys in high-stress applications. This study not only advances the understanding of chromium coatings for babbitt materials but also demonstrates the potential of machine learning in optimizing tribological performance.

13 June 2023 in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
Verified
Journal Article
Open access
PDF file
MTManahil Tongov
Manahil Tongov
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
Layer-by-layer detailing processes, which used wire and electric arc - wire arc additive manufacturing (WAAM), are among the most productive in 3D metal printing technologies. From this point of view, the solution of the thermal task, and subsequently of the deformation problem, are particularly relevant. It is natural that these simulation modelling processes are closely related to welding, but at the same time it is necessary to take into account particularities that are crucial for WAAM and are not always relevant in welding. In this research, one such model is proposed, which takes into account the gradual filling of the working space with the deposited metal. The specific issues related to the construction of the model, the definition of the heat source and the first layer formation in the conditions of WAAM are considered. The obtained numerical results enable the prediction of the layer dimensions.

30 September 2024 in Proceedings of the Bulgarian Academy of Sciences
Verified
Journal Article
Open access
PDF file
MTManahil Tongov
Manahil Tongov
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
PTPlamen Tashev
Plamen Tashev
Experiments were carried out for WAAM of samples using electric arc and additive material in the form of solid wire grade G3Si1. The layers were built-up with one transition each. Metallographic macro- and microsections were made from the obtained samples. The macro- sections are used to determine the locations of microhardness measurements. The microsections were used to measure the microhardness and to illustrate the microstructure. The analysis of the obtained results shows that the heat input and the interlayer temperature are of crucial importance for the obtained mechanical characteristics of the built-up samples. The microstructure of the obtained layers varies along the height of the built-up samples thus witnessing for the thermal treatment occurring in each layer except the last one as a result of applying the subsequent layers.

29 August 2023 in Proceedings of the Bulgarian Academy of Sciences
Verified
Journal Article
Closed access
MAMihaela Aleksandrova
Mihaela Aleksandrova
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
VBVladimir Blaskov
Vladimir Blaskov
VKValery Korzhov
Valery Korzhov
VKVyacheslav Kiiko
Vyacheslav Kiiko
IZIrina Zheltyakova
Irina Zheltyakova

30 November 2024 in Proceedings of the Bulgarian Academy of Sciences
Verified
Journal Article
Open access
PDF file
MTManahil Tongov
Manahil Tongov
VPVladimir Petkov Petkov
Vladimir Petkov Petkov
PTPlamen Tashev
Plamen Tashev
Experiments are carried out on WAAM using solid wire grade G3Si1 as additive material. The layers are deposited with single beads. Metallographic macro sections are made from the obtained samples and are used to determine the geometric dimensions of the layers, i.e. width, height and lateral waviness. The correlation coefficients between the heat input and the geometrical dimensions of the obtained layers are determined and their significance is proved according to the student’s distribution. Based on the correlation coefficients, the coefficients of determination are calculated. It is proved that over 90% of the changes in the layer's width and over 76% of the changes in the layer's height are due to changes in the heat input. The analysis of the obtained results shows that the heat input is determining for the geometric dimensions of the layers and the lateral waviness can be decreased by increasing the travel speed.