Dong Wang

Dr. Dong Wang


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2024 in Journal of Advanced Ceramics
Verified
Journal Article
Open access
PDF file
JZJun Zhao
Jun Zhao
XZXingshuo Zhang
Xingshuo Zhang
ZMZongning Ma
Zongning Ma
DWDong Wang
Dong Wang
XJXing Jin
Xing Jin
SRSonglin Ran
Songlin Ran
B4C–TiB2 is an advanced electrically conductive ceramic with excellent mechanical and electrical discharge machinable properties. It is challenging and rewarding to achieve highly conductive and hard B4C–TiB2 composites at a minimum content of conductive TiB2 that has inferior hardness but double the specific gravity of the B4C matrix. A novel strategy was used to construct conductive networks in B4C‒15 vol% TiB2 composite ceramics with B4C, TiC and amorphous B as raw materials by a two-step spark plasma sintering method. The influences of particle size matching between B4C and TiC on the conducting of the strategy and the microstructure were discussed based on the selective matrix grain growth mechanism. The mechanical, electrical properties were also systematically investigated. B4C–15 vol% TiB2 composite ceramic prepared from 10.29 µm B4C and 0.05 µm TiC powders exhibited a perfect three-dimensional interconnected conductive network with a maximum electrical conductivity of 4.25×104 S/m, together with excellent mechanical properties including flexural strength, Vickers hardness and fracture toughness of 691±58 MPa, 30.30±0.61 GPa and 5.75±0.32 MPa·m1/2, respectively, while the composite obtained from 3.12 µm B4C and 0.8 µm TiC powders had the best mechanical properties including flexural strength, Vickers hardness and fracture toughness of 827±35 MPa, 32.01±0.51 GPa and 6.45±0.22 MPa·m1/2, together with a decent electrical conductivity of 0.65×104 S/m.

16 June 2022 in JOM
Verified
Journal Article
Closed access
PDF file
DWDong Wang
Dong Wang
KXKai Xu
Kai Xu
QLQinggui Li
Qinggui Li
XDXiang Ding
Xiang Ding
SRSonglin Ran
Songlin Ran

16 November 2019 in Materials
Verified
Journal Article
Open access
PDF file
BWBoxin Wei
Boxin Wei
DWDong Wang
Dong Wang
YWYujin Wang
Yujin Wang
HZHaibin Zhang
Haibin Zhang
ZrCx ceramics with different stoichiometries were irradiated under a four MeV Au ion beam in doses of 2 × 1016 ions/cm2 at room temperature, corresponding to ~130 dpa. Grazing incidence, X-ray diffraction and transmission electron microscopy were performed to study the radiation damage and microstructure evolution in ZrCx ceramics. With the decrease in C/Zr ratio, the expansion of ZrCx lattice became smaller after irradiation. Some long dislocation lines formed at the near-surface, while, in the area with the greatest damage (depth of ~400 nm), large amounts of dislocation loops formed in ZrC, ZrC0.9 and ZrC0.8. With the increase in carbon vacancy concentration, the size of the dislocation loops gradually decreased. Few dislocation loops were found in ZrC0.7 after irradiation, and only black-dot defects were found in the area with the greatest damage. For the non-stoichiometric ZrCx, with the increase of the intrinsic vacancies, the number of C interstitials caused by irradiation decreased, and the recombination barrier of C Frenkel pairs reduced. The above factors will reduce the total number of C interstitials after cascade cooling, suppressing the formation and growth of dislocation loops, which is significant for the enhancement of the tolerance of radiation damage.

25 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
KXkai xu
kai xu
YZYaning Zhang
Yaning Zhang
DWDong Wang
Dong Wang
XJXing Jin
Xing Jin
XDXiang Ding
Xiang Ding
Transition metal carbide reinforcement can improve the performance of pure W. W-(10–50) vol% TaC composites were prepared by spark plasma sintering at 2100 °C. The effect of TaC content on the microstructure, mechanical properties, and thermal conductivity of the composites was studied. The ablation resistance of the W-TaC composites was evaluated under an air plasma torch. The addition of TaC into the W matrix enhanced the densification of W-TaC composites, the density of W-40 vol% TaC composite exceeded 93%. TaC particles inhibited the growth of W grains during sintering. Reactive diffusion occurred between W and TaC, forming the solid solutions of (W,Ta)ss and (Ta,W)Css. W and TaC react to form the W2C phase at a TaC content of 50 vol%. The Vickers hardness of the composite increases from 3.06 GPa for WTA1 to 10.43 GPa for WTA5. The flexural strength reached 528 MPa in the W-40 vol% TaC composite. The thermal conductivity of W-20 vol% TaC composite was 51.2 ± 0.2 W·m−1·K−1 at 750 °C. The addition of TaC improved the ablation resistance of W-TaC composites. The mass ablation rate of W-30 vol% TaC composite was 0.0678 g·s−1. The ablation products were mainly W oxides and complex oxides of W-Ta-O.

12 August 2022 in JOM
Verified
Journal Article
Closed access
PDF file
DWDong Wang
Dong Wang
KXKai Xu
Kai Xu
BWBoxin Wei
Boxin Wei
XDXiang Ding
Xiang Ding
SRSonglin Ran
Songlin Ran

16 January 2023 in Journal of Wuhan University of Technology-Mater. Sci. Ed.
Verified
Journal Article
Closed access
PDF file
DWDong Wang
Dong Wang
KXKai Xu
Kai Xu
BWBoxin Wei
Boxin Wei
YWYujin Wang
Yujin Wang