Among the various types of jamming, active deception jamming has similar characteristics to the transmitted signal. The jamming seriously affects the detection and tracking of real targets by radar. In recent years, waveform design has become an effective anti-jamming method with the maturity of waveform generator technology. However, most anti-jamming waveforms are only designed to combat a single kind of jamming. To compensate for the shortage of existing waveforms that cannot simultaneously combat compound deception jamming, we construct an interpulse-intrapulse joint frequency coded(I-IJFC) anti-jamming waveform and analyze the anti-jamming process flow. Moreover, to reduce the influence of residual jamming, we propose an intrapulse frequency-coded method based on jamming parameters estimation. The waveform can be used against cross-pulse repeater deception jamming(CRDJ) and interrupted sampling jamming(ISJ). Then, to solve the problem that the existing algorithm cannot realize the coherent accumulation of the proposed waveform, we propose a coherent accumulation algorithm of subpulse rearrangement compensation and nonuniform discrete Fourier transform (SRCNDFT). The simulation examples show that the waveform proposed in this paper performs better against compound deception jamming than existing waveforms, and the proposed algorithm can realize the coherent accumulation of I-IJFC echo signals.
22 July 2020 in IEEE Transactions on Signal Processing
As an efficient way to interpret the measurements of high-frequency synthetic aperture radar (SAR), an attributed scattering center (ASC) model provides concise and physically relevant features of complex targets. However, accurate extractions of ASCs have been heavily penalized by high memory requirements and computational complexity. We propose to convert SAR measurements to sparse representations in the image domain where the ASC model parameters can be estimated by using an orthogonal matching pursuit (OMP) algorithm or its Newtonlized variation. Two important new properties of the ASC model are unveiled in the image domain, namely, “translatability” and “additivity.” The properties can help save the dictionary of OMP from sampling the position and length parameters. The atoms of the dictionary become localized, thereby reducing the dictionary size and accelerating ASC extractions. Extensive experiments are conducted based on open-source XPATCH Backhoe data, measured MSTAR data, and synthetic backscatter data. The results show that the proposed approach is able to outperform existing image-domain algorithms in terms of accuracy and noise resistance, and outperform existing frequency-domain algorithms in terms of memory requirement and runtime.
31 December 2021 in IEEE Transactions on Geoscience and Remote Sensing
The attitude and size of satellite targets are essential information for their activity analysis. This article proposes a novel approach to estimate the absolute attitude and size of satellite targets in the 3-D stable coordinates based on inverse synthetic aperture radar (ISAR) image interpretation. In an ISAR image of a satellite, the satellite’s body is chosen as an individual structure segmented from each ISAR image by employing pix2pix generative adversarial network (Pix2pixGAN). By exploring the shape feature of the satellite body with principal component analysis (PCA), the satellite attitude and size are estimated jointly through solving an optimization based on the gradient iteration method. The optimization is established by bridging range-Doppler (RD) images and the target feature parameters (attitude and size) with the accommodation of target trajectory information and the ISAR geometric projection model. In the experiments, the simulation data are generated from real satellite orbital parameters and the computer-aided-design (CAD) models of two satellite targets: TianGong (TG) and KeyHole (KH). Compared with the factorization-based reconstruction method, the proposed method can estimate the attitude and size of the satellite simultaneously and has a higher size estimation accuracy.
14 March 2022 in IEEE Transactions on Geoscience and Remote Sensing
It is challenging to estimate satellite targets’ absolute attitude and size with limited observational data. This article proposes an innovative way to jointly estimate satellite targets’ absolute attitude and size in the 3-D stable coordinates based on inverse synthetic aperture radar (ISAR) image interpretation with only one image. By taking advantage of the rectangular solar panels commonly equipped on satellites, this article extracts solar panel’s principal components, line features, and phase features of single ISAR imagery with principal component analysis (PCA), radon transform (RT), and minimum-entropy (ME)-based autofocus method, respectively. The projection relationship between these features and the absolute attitude and size of the satellite are established separately. Through multi-features fusion, a joint parameter estimation optimization function is established. This optimization is solved iteratively by the quasi-Newton method. The attitude and size parameters can be estimated simultaneously and rapidly, realizing the satellite state estimation under limited observation data. The excellent performance of the proposed algorithm is verified through different experiments.
11 August 2021 in IEEE Transactions on Geoscience and Remote Sensing
This article presents a novel approach for the joint estimation of satellite attitude and size based on inverse synthetic aperture radar (ISAR) image interpretation and parametric optimization. The satellite’s solar panel, which is segmented from the ISAR image by employing pix2pix generative adversarial network (Pix2pixGAN), is chosen for investigation in this article due to its unique rectangular structure. We innovatively use the principal component analysis (PCA) to explore the satellite solar panel’s structural features in an ISAR imagery. The projection matrix is then established to link the extracted features and the satellite’s absolute attitude and size. Parametric optimization is established based on the relationship between the extracted features and the satellite’s absolute attitude and size. A Broyden–Fletcher–Goldfarb–Shanno (BFGS)-based fast iterative search algorithm is employed to search the satellite’s absolute attitude and size simultaneously through an iterative approach. The simulation data are generated from actual satellite orbital parameters and computer-aided-design (CAD) models of the Aqua satellite in the experiments. Simulation experiments verify the effectiveness of the proposed method.