A beam finite element model considering the slip, shear lag, and time-dependent effects of steel–concrete composite box beams have been proposed in this study. The element is employed to a one-dimensional analytical method that is solved involving an expression of spatial and time-dependent variables. A step-by-step method that does not involve storing the stress and strain histories, which is more accurate than the single-step algebraic method, is employed to solve the time variables. A recursive method was elaborated to determine spatial and time-dependent variables through the above method. The validity of the proposed method in instantaneous analysis is attested by the numerical data of the elaborate finite element model established in a commercial software, ANSYS, and that of the time-dependent analysis is verified by the existing test results on the long-term performance of composite beams. The proposed beam finite element model is applied to predict the time-related behavior of simply supported composite beams after validation. The results show that concrete shrinkage and creep significantly influence the structural responses of the composite box beams. From the initial load on the 28th day to that in the 3rd year, the vertical deflection at the cross-section of the mid-span increased by 47.01%. The interface slip at the end increased by −10.99%. The warping intensity function of the concrete slab and the steel beam at the end caused by shear lag increased by 111.64% and 7.01%, respectively. The maximum compressive stress on the concrete slab and the maximum tensile stress at the steel bottom flange increased by −6.75% and 4.56%, respectively.

The group studs arrangement is applied to prefabricated composite beams to significantly improve construction speed. However, contact vibration exists in the unconstrained interface area of the high-speed railway composite beam during the operation period, which degrades the connecting performance of the composite beam and adversely affects the overall structure. In this study, finite element simulations of the vibration of concrete slabs and steel beams in the unconstrained interface area were carried out to obtain finite element models with damage. The effects of vibration damage on the degradation of the studs were investigated by push-out and pull-out tests using finite element simulation of the local specimen model. The macroscopic ontological models of the undamaged and previously damaged group studs were obtained. Compared with the specimen without damage, the ultimate bearing capacity of the pushed-out specimen with damage decreased by 24.8%; the ultimate slip decreased by 15%; and the stiffness decreased by 12.8%. The behavior of the pulled-out specimen with damage was almost the same as that of the specimen without damage. On this basis, a finite element model of the train–track–composite beam coupling system was established. The influence of the degradation of the connection on the coupling system with 300 km/h, 330 km/h, and 360 km/h train speeds was analyzed under the conditions of single-train driving and a two-train rendezvous. In the case of single-train travel, compared with the undamaged composite beam, the mid-span vertical displacements of the composite beams with damage increased by 13%, 8.38%, and 6.2% for train speeds of 360 km/h, 330 km/h, and 300 km/h, respectively; the transverse displacements increased by 24.2%, 15%, and 9.2%, respectively. In the case of a two-train rendezvous, the mid-span vertical displacements increased by 8.8%, 13.7%, and 12.8%, respectively; the transverse displacements increased by 26.4%, 53%, and 24.8%, respectively.

The flange joint is an important connection in steel tube structures. In this paper, 11 groups of flange joint tests were conducted to investigate the influences of tube diameter, flange plate thickness, the distance from the bolt to the tube centroid, bolt numbers and material strength on the mechanical behavior. One of two failure modes in tests is that the excessive plastic deformation on the flange plate makes the flange plate lose the bearing capacity; the other is that the steel tube yield makes the joints fail. The results show that the calculating method for flange joint in Chinese design code is so safe that amplifying the calculating results of the code by 1.2 times would be closer to the bearing capacity of specimens. For a flange joint with different tube diameters, thickening the flange plate of thinner tube or thinning the flange plate of another tube are effective to ensure the deformations on both sides of the flange plates are equivalent. The ratio of the bearing capacity of the steel tube to that of flange plate should be greater than 1.7. And the thickness of the flange plate should be thicker than 14mm to reduce the deformation caused by cutting, drilling and welding during manufacturing.

This paper presents a proposed static test and numerical study on the mechanical properties of steel-shell–concrete-structure-immersed tunnel nodes, which is used to investigate the seismic performance and damage mechanism of steel-shell–concrete-structure-immersed tunnel nodes. The test is based on the immersed tube tunnel project in the deep China channel, and the nodes representing the outermost and innermost vertical walls of the immersed tube tunnel, i.e., L-shaped and T-shaped node specimens, were designed and fabricated at a scale of 1:5, and the specimens were mainly subjected to the combined effect of vertical axial compression and lateral displacement loads. The test results show that the L-shaped node will exhibit brittle damage characteristics with high lateral load carrying capacity and energy dissipation capacity during the ultimate load phase, while the T-shaped node exhibits bending damage with better ductility, so the outermost vertical wall should be locally reinforced to ensure the necessary ductility of the structure in the actual project. In addition, by comparing the numerical calculation and experimental results, it is found that there is good agreement in terms of load–displacement curves and crack distribution, which shows that the modeling method proposed in this paper can accurately simulate the mechanical properties of immersed tunnel nodes and can guide the section design of immersed tunnels with steel shell–concrete structures.