The low-strain integrity testing of large-diameter piles has attracted more and more attention because of its wide application in offshore engineering, such as for wind turbines, etc. Body and Rayleigh waves generate on the top surface of large-diameter piles after the excitation load. The multi-reflections of these waves from the pile side result in the obvious three-dimensional effect at the pile top. Therefore, one-dimensional wave theory is no longer suitable for interpreting the wave propagation in the pile body under vertical excitation. In this paper, based on the “pile in pile” conception, both the pile and soil were simulated using a three-dimensional continuum model, considering the vertical displacement, to investigate the influence of the three-dimensional effect of the pile-soil system on the vertical dynamic response of large-diameter piles in low-strain integrity testing. The axisymmetric solution to the three-dimensional pile-soil system was obtained, and the rationality of the proposed solution was verified by comparing it with the results of the finite element method and the results of other existing solutions. Arithmetic examples were used to describe the influence of the three-dimensional effect of the pile-soil system on the vertical dynamic response of large-diameter piles.
Concrete-cored cement-soil mixing(CCM) piles are widely used to improve the bearing capacity of soft coastal soils. Obviously, the CCM pile-soil system exhibits radial heterogeneity, especially for large-diameter CCM piles. However, the existing traditional ”pile in pile” model is not suitable any more, especially when the core pile is pipe pile and the load is eccentric. Therefore, in this paper, a generalized theoretical 3D pile-in-pile model is established to simulate the vertical dynamic characteristics of the large-diameter CCM pile. In this model, the ”radial invariability assumption” is also introduced, which makes this model suitable for the CCM pile with pipe-core and solid-core pile. Firstly, the generalized 3D pile-in-pile model is reduced for comparing with the other existing pipe pile models to validate its advantages. And comparing with the finite element model (FEM) to verify the rationality of the generalized 3D pile-in-pile model for large-diameter CCM piles. And the generalized 3D pile-in-pile model is reduced for comparing with the other existing pipe pile models to validate its advantages. Finally, the interface reflection interference mechanism and the vertical vibration characteristics of large-diameter CCM piles are investigated.