Werku Koshe Hareru

Dr. Werku Koshe Hareru


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WHWerku Koshe Hareru
Werku Koshe Hareru
TGTewodros T Ghebrab
Tewodros T Ghebrab
The use of molasses as a replacement for bitumen could benefit the pavement industry by improving the performance of the pavement or by lowering its cost. An experimental investigation was carried out to investigate the effect of molasses with different moisture contents on the property of hot-mix asphalt (HMA). Bitumen binders (BB) containing 5%, 10%, 15%, and 20% molasses were investigated as molasses modified binders (MMB). Molasses with 24.9% and 5.02% by weight of water were used to investigate the effect of moisture on the MMBs. In addition to the conventional binder tests, additional tests such as the Fourier transform infrared (FTIR) test, amplitude and frequency sweep test, performance grade (PG) test, and multiple stress creep recovery (MSCR) test were performed. The results indicated that most of the properties of the MMBs improved with the reduction in the moisture content of molasses but worsened with the percentage replacement of molasses. The IR spectra show that the carbonyl index decreased with an increasing amount of molasses. The control grade PG58 was improved to PG64 and PG70 when the base binder was modified with molasses and aged with rolling thin film oven (RTFO) consecutively. At a temperature of 58 °C, non-recoverable creep compliance of 3.2 kPa (Jnr3.2kPa) was decreased for each MMB, which leads to improved rutting potential. At a temperature of 64 °C, the Jnr value was decreased only for the MMB containing 5% molasses, and then gradually increased for the remaining MMBs. Generally, the study revealed that low moisture content molasses could be used as a partial replacement for bitumen to enhance the rheological properties of the bitumen.

16 May 2022 in International Journal of Sustainable Construction Engineering Technology
Verified
Journal Article
Open access
PDF file
FAFirew Belayneh Asfaw
Firew Belayneh Asfaw
WHWerku Koshe Hareru
Werku Koshe Hareru
TGTewodros Ghebrab
Tewodros Ghebrab
Today researchers all over the world are focusing on ways of utilizing either industrial or agricultural wastes as a source of raw materials for the construction industry. This is used to minimize the emission of CO2 during the manufacturing of cement. One of the agricultural waste products is coffee husk which is found in large amounts in Ethiopia. This paper aims to characterize the physical and chemical properties of Coffee Husks Ash (CHA) by using X-ray diffraction (XRD), Scanning electron microscope (SEM), and Fourier Transforms Infrared Spectroscopy (FTIR) tests, and also the experiment were conducted to determine the compressive, split tensile and flexural strength of the material and durability tests were determined. The result have shown that, when the replacement percent further increases, the crystalline material increases, silicate concentration decreases, and also the micro pores or air void are increases, which may lead to decreasing the strength of concrete. In the case of mechanical property of concrete, there has been remarkable increment up to 5% CHA replacement and also strongly satisfied up to 10% replacement, furthermore increasing CHA replacement up to 20% are optimum dosage of normal concrete mix production of C-25 concrete. Finally, water absorption and sulfate attack of partially replaced concrete is shown as an improvement in the durability of concrete.

4 March 2024 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
EYEsubalew Yayena
Esubalew Yayena
WHWerku Koshe Hareru
Werku Koshe Hareru
This engineering study investigates the mechanical properties and durability of Hollow Concrete Blocks (HCBs) made with banana leave-ash-replaced cement. This study focused on analyzing the physiochemical composition of banana leaf ashes (BLAs) and their impact on the mechanical and durability properties of these blocks. HCB production requires binding materials such as cement, and BLAs, a byproduct of agricultural waste containing Pozzolana, serve as an alternative. This study experimented with alternative mixtures to evaluate the influence of BLAs on the strength and durability of blocks, particularly their resistance to acid and sulfate attacks. The test was conducted by partial replacement of Dangote Ordinary Portland cement 42.5R with 0%, 5%, 10%, 15%, and 20% BLAs for Class “A,” “B” and “C” HCBs. The test results indicated that HCBs produced by BLAs can replace cement HCBs to achieve better strength and durability properties with respect to standards. Statistical results show that BLAs have a significant effect on the compressive strength of HCBs. Chemically acidic and sulfate-attack-resistant HCBs were examined, and the results showed that HCBs with BLAs had good resistance. The results of an experimental study on the mechanical and durability properties of BLAs blended with cement HCBs showed that replacing BLAs by up to 20% improves the durability and strength of blocks, resulting in better performance than the standards. The optimum percentage of partial replacement of BLAs with cement to produce HCBs is 20%.

16 February 2017 in Advances in Materials
Verified
Journal Article
Open access
PDF file
SBShewit Birhane
Shewit Birhane
MMMikyas Mesfin
Mikyas Mesfin
WHWerku Koshe Hareru
Werku Koshe Hareru
This study presents an experimental approach for the use of Papercrete for construction. Green materials are now the preferred material for construction since they are capable of lighter weight and affordable. Based on recent studies, alternative building materials are cost effective, light weight when dry, and efficient to use. This study started from referring different literatures concerning the topic and related ideas up to conceptualization and design of the trial ratio to be used in testing. The goal of the study is to utilize Papercrete toward attaining a sustainable development. Testing and Analysis of the result provided sufficient data to prove whether it is possible to use Papercrete concrete as a construction material according to the data’s the 14 th & 28 th day compressive strength of the ratios 1:1:0.5, 1:1:1, 1:1:1.5 has become 1, 0.5, 0.24 & 2.1, 0.98, 0.56 MPa respectively. For the water absorption test 23.1%, 34.3%, 33.07% respectively for the weight 7.2 kg, 6.6 kg, 6.1 kg respectively and additionally for the density test 774.193, 709.677, 655.9139 kg/m 3 respectively. Comparison between the samples formulated was used to analyze if it may be used in the future as a construction elements.

26 September 2025 in Discover Applied Sciences
Verified
Journal Article
Open access
PDF file
EMEshetu Mekonnen
Eshetu Mekonnen
SHSurafel Hailu
Surafel Hailu
WHWerku Koshe Hareru
Werku Koshe Hareru
KTKebru Tegegn
Kebru Tegegn
Concrete has become an indispensable component in construction due to its high efficiency, easy of mixing to meet a variety of special needs, and ability to be formed to virtually any shape. However, despite its numerous desirable qualities, concrete has several drawbacks that need improvement, such as weak and porous interfaces making it prone to micro cracking, significant energy usage, and environmental risks. Therefore, this study aimed to investigate the effects of Microbially Induced Calcite Precipitation (MICP) in enhancing the strength, reducing the permeability of concrete, and goal to minimize cement use. The study involved soil sampling, bacteria isolation, and fermentation to produce bio-cement added to concrete in different ratios. An experimental study design was used to investigate the effect of six levels of selected MICP: 0, 20%, 40%, 60%, 80%, and 100% by wt on the workability, density, compressive strength, Strength Activity Index, tensile strength, permeability, and flexural strength of concrete. The study showed that the addition of bio-cement significantly improved the density of conventional concrete by 0.7%, compressive strength by 33.7%, tensile strength by 20%, permeability by 46.65%, and flexural strength of concrete by 6.8%. From the study findings, it was concluded that the addition of bio-cement can improve the permeability and strength of concrete up to a certain extent with the best improvement achieved at 60% bio-cement content. The research introduced a novel, sustainable, cost-effective, and environmentally friendly biomaterial for construction that demonstrated superior performance.

20 October 2022 in International Journal of Sustainable Construction Engineering Technology
Verified
Journal Article
Closed access
TMTigist Meggabi
Tigist Meggabi
WHWerku Koshe Hareru
Werku Koshe Hareru
DMDemboba Mulugeta
Demboba Mulugeta
The objective of the study is a partial replacement of natural fine aggregate with crushed waste glass for M 30 concrete production. To determine the compressive strength of such concrete for using 10% 15%, 20%, and 25% of partial replacement including control samples using 0.45, 0.47, and 0.50 water-cement ratios. Quality tests, slump, compressive strength, density, permeability, and Ultrasonic pulse velocity test are performed; the cube of concrete mix design test follows the American Concrete Institution (ACI) guideline. And to develop a predictive model for the 7days and 28days compressive strength using a fuzzy model. The result has shown that the physical properties, of course, fine aggregate and crushed waste glass satisfy the standard specification, when the replacement percent increases, the compressive strength and ultrasonic pulse velocity of concrete are increased up to 15% of replacement level Due to the angular nature of waste glass particles contributes more effective cement past. Thus reduction of microscopic voids in concrete. The study also found the depth of penetration for concrete indicates the increased replacement percent increase in the depth of penetration increase due to increase microscopic void space. It was concluded that the natural sand is effectively partially replaced by crushed waste glass, maximum compressive strength was achieved at 15% of replacement level. The result showed that quite satisfactory in predicting the Compressive strength for 7 and 28 days strength of the M-30 concrete mix using the fuzzy logic technique with a coefficient of correlation, R2 of 0.87 and 0.85 respectively for training and validation set. The significance of the study is that the compressive strength of concrete made with partial replacement of natural fine aggregate by the crushed waste glass can be predicted by using the predictive model developed.