This study conducted an extensive literature review on rice husk ash (RHA), with a focus on its particle properties and their effects on the fresh, mechanical, and durability properties of concrete when used as a partial cement replacement. The pozzolanic property of RHA is determined by its amorphous silica content, specific surface area, and particle fineness, which can be improved by using controlled combustion and grinding for use in concrete. RHA particle microstructures are typically irregular in shape, with porous structures on the surface, non-uniform in dispersion, and discrete throughout. Because RHA has a finer particle size than cement, the RHA blended cement concrete performs well in terms of fresh properties (workability, consistency, and setting time). Due to the involvement of amorphous silica reactions, the mechanical properties (compressive, tensile, and flexural strength) of RHA-containing concrete increase with increasing RHA content up to a certain optimum level. Furthermore, the use of RHA improved the durability properties of concrete (water absorption, chloride resistance, corrosion resistance, and sulphate resistance). RHA has the potential to replace cement by up to 10% to 20% without compromising the concrete performance due to its high pozzolanic properties. The use of RHA as a partial cement replacement in concrete can thus provide additional environmental benefits, such as resource conservation and agricultural waste management, while also contributing to a circular economy in the construction industry.
1 December 2015 in Construction and Building Materials
Buildings use a wide range of construction materials, and the manufacturing of each material consumes energy and emits CO2. Several studies have already been conducted to evaluate the embodied energy and the related CO2 emissions of building materials, which are mainly based on case studies from developed countries. There is a considerable gap in cases of developing countries regarding assessment of embodied energy and CO2 emissions of these building materials. This study identified the top five most used construction materials (cement, sand, coarse aggregates, hollow concrete blocks, and reinforcement bars), which are also prime sources of waste generation during construction in the Ethiopian building construction sector. Then, what followed was the evaluation of the embodied energies and CO2 emissions of these materials by examining five commercial and public buildings within the cradle-to-site lifecycle boundary. The evaluation results demonstrated that cement, hollow concrete blocks (HCB), and reinforcement bars (rebars) are the major consumers of energy and major CO2 emitters. Cumulatively, they were responsible for 94% of the embodied energy and 98% of the CO2 emissions. The waste part of the construction materials has inflated the embodied energy and the subsequent CO2 emissions considerably. The study also recommended several strategies for the reduction of embodied energy and the related CO2 emissions. The research delivers critical insights into embodied energy and CO2 emissions of the five most used building materials in the Ethiopian construction industry, as there are no prior studies on this theme. This might be a cause to arouse awareness and interest among the policy makers and the wider public to clearly understand the importance of research on this crucial issue to develop national energy and CO2 descriptors for construction materials, in order to take care of our naturally endowed, but yet fragile, human habitat.