This study addresses the challenge of acquiring digital materials for E-learning software development. By employing finite element modeling and simulation techniques, a substantial collection of visual resources, including stress nephograms, was obtained for the three-point bending experiment. These materials formed the foundation for the development of an E-learning software program. The software was successfully implemented in classroom instruction, demonstrating its effectiveness in enhancing student understanding and engagement. Through a mixed methods research design, this study provides empirical evidence supporting the potential of simulation technology as a method for acquiring digital materials in E-learning. The systematic and scientific approach employed in this study offers insights for future development and implementation efforts in educational technology.
Problem-based learning (PBL) faces challenges in mechanics education due to a lack of visualization. This study investigates the application of finite element technique to develop digital resources for supporting PBL courses. A bending-torsion combined deformation case was used to conduct finite element modeling and Abaqus simulation. The obtained color stress contours and data were integrated into mechanics teaching. A teaching experiment was carried out to evaluate the effectiveness of this approach. Survey data demonstrate that the visual materials generated by finite element technique enrich PBL instruction by facilitating motivation and discussions among students. While active participation remains limited, students were satisfied with the experiment and welcomed incorporating more technologies into classroom teaching. Overall, the finite element technique shows promise for addressing visualization challenges in PBL mechanics courses.
This paper presents the development and application of digital curriculum resources for the mechanics course, specifically focusing on the integration of finite element technology (FET). By utilizing the finite element software Abaqus, we constructed a finite element model and obtained visualization resources in the form of colored Mises stress nephograms through simulation technology. These digital resources were seamlessly integrated into the existing curriculum, and teaching experiments were conducted in multiple classes at a vocational college to assess their feasibility and scientific rigor. The findings revealed that the implementation of FET-based digital resources, including the colored stress nephograms, positively influenced student learning and motivation. Students reported that these resources were instrumental in comprehending experimental content and related formulas. Furthermore, the teaching experiments significantly enhanced the overall quality of instruction at the vocational college. Statistical analysis of the teaching survey data demonstrated that over 90% of students recommended the adoption of innovative technologies like FET in future classroom teaching. The high Cronbach's coefficient alpha value of the questionnaire further enhanced the reliability and internal consistency of the obtained data. This paper provides valuable insights into the application of FET in vocational education and serves as a foundation for future research in this field.
Equipment wear and assembly clearances can change the longitudinal stiffness of hot strip mills and further affect roll-gap levelling accuracy and asymmetric strip profile control. In this study, the longitudinal stiffness of a 1580 mm four-high hot strip finishing mill was investigated by combining the analytical calculation of the hydraulic press-down system with a three-dimensional mill–strip finite element model. The effects of typical horizontal and vertical gap forms, including work-roll offset, same-side deflection, roll crossing, and unilateral vertical clearance caused by step-pad wear, on total longitudinal stiffness and stiffness difference between the two sides were analysed systematically. The results show that work-roll horizontal offset changes the longitudinal stiffness in a nonlinear manner, whereas work-roll rotation and roll crossing generally reduce the longitudinal stiffness and increase the stiffness asymmetry between the two sides. Unilateral vertical clearance also causes nonlinear variation in both total stiffness and side-to-side stiffness difference. The proposed method was further applied to the stiffness prediction module of the Guangxi BG 1700 mm hot strip mill production line, providing support for equipment maintenance, roll-gap levelling, and stable strip production.
The standard Grey Wolf Optimizer (GWO) suffers from rapid population diversity loss when solving the Traveling Salesman Problem (TSP), leading to premature convergence. This paper proposes the Closed-Loop Adaptive Grey Wolf Optimizer (CLA-GWO), which constructs a five-layer closed-loop adaptive framework comprising: (i) discrete GWO evolution, (ii) dual-threshold diversity detection, (iii) three-level adaptive catastrophe, (iv) two-phase recovery, and (v) self-learning feedback control. The algorithm autonomously perceives population homogenization and restores diversity through scale-adaptive intervention. A two-stage parameter optimization strategy, combining the tree-structured Parzen estimator (TPE) with one-factor-at-a-time (OAT) sensitivity analysis, identified the optimal configuration. Component ablation on seven variants revealed that performance is principally driven by 2-opt local search and nearest-neighbor (NN) initialization, while the catastrophe lockout period (CLP) and multi-level catastrophe mechanisms safeguard diversity. Benchmark comparison on 20 TSPLIB instances demonstrated that CLA-GWO achieves competitive or superior performance under the adopted benchmark protocol against eight state-of-the-art algorithms across primary and secondary comparison groups. A Friedman test confirmed that the overall performance difference among the three independent baselines and CLA-GWO is statistically significant. The framework’s perceive–decide–intervene–recover–learn principle suggests a candidate transferable design pattern for other population-based metaheuristics; its current validation is limited to symmetric TSP, and asymmetric or non-Euclidean variants remain to be examined.
Compared to students in traditional undergraduate institutions, vocational college students often face challenges in understanding abstract concepts and dealing with complex formulas. The quality of mechanics education in vocational colleges has been a focal point of concern, with students exhibiting disinterest and reluctance towards complex formulas. To address this issue, this study designs an E-learning software and conducts teaching experiments. As a case study, the study focuses on the bending deformation formula, which is one of the more challenging concepts in mechanics. A 3D model is constructed using the finite element method, and the obtained stress nephograms are integrated into the existing curriculum. The E-learning software is developed using the C# programming language, and teaching experiments are conducted. The evaluation results demonstrate that students rated the software highly, with an average score of 8.75 out of 10, emphasizing its effectiveness in assisting students’ learning and mastery of the bending deformation formula. This research provides a new insight into the design of E-learning software, particularly in acquiring digital materials, and warrants further exploration by scholars in the field of vocational education.