Surface plasmon polaritons enable light concentration within subwavelength regions, opening thereby new avenues for miniaturizing the device and strengthening light–matter interactions. Here we realize efficient electro-optic modulation in low-loss plasmonic waveguides with the aid of graphene, and the devices are fully integrated in the silicon-on-insulator platform. By advantageously exploiting low-loss plasmonic slot-waveguide modes, which weakly leak into a substrate while featuring strong fields within the two-layer-graphene covered slots in metals, we successfully achieve a tunability of 0.13 dB μm−1 for our fabricated graphene-plasmonic waveguide devices with extremely low insertion loss, which outperforms previously reported graphene-plasmonic devices. Our results highlight the potential of graphene plasmonic leaky-mode hybrid waveguides to realize active ultra-compact devices for optoelectronic applications.
An ultra-compact and broadband higher order-mode pass filter in a 1D photonic crystal silicon waveguide is proposed and experimentally demonstrated. The photonic crystal is designed for the lower order mode to work in the photonic band gap, while the higher order mode is located in the air band. Consequently, light on the lower order mode is prohibited to pass through the filter, while light on a higher order mode can be converted to a Bloch mode in the photonic crystal and pass through the filter with low insertion loss. As an example, we fabricate a -μm-long first-order-mode pass filter that filters out the fundamental mode and provides a measured insertion loss of for the first-order-mode pass signals. The extinction ratio is measured to be around 50 dB (with a variation of due to the detection limitation of the measurement setup) in the measured wavelength range from 1480 to 1580 nm. Additionally, calculations predict the extinction ratio to be larger than 50 dB in a 170 nm broad bandwidth.
We report on a novel design of an on-chip optical temperature sensor based on a Mach-Zehnder interferometer configuration where the two arms consist of hybrid waveguides providing opposite temperature-dependent phase changes to enhance the temperature sensitivity of the sensor. The sensitivity of the fabricated sensor with silicon/polymer hybrid waveguides is measured to be 172 pm/°C, which is two times larger than a conventional all-silicon optical temperature sensor (~80 pm/°C). Moreover, a design with silicon/titanium dioxide hybrid waveguides is by calculation expected to have a sensitivity as high as 775 pm/°C. The proposed design is found to be design-flexible and robust to fabrication errors.
Silicon photonic integrated circuits (PICs) show great potential for many applications. The phase tuning technique is indispensable and of great importance in silicon PICs. An optical phase shifter with balanced overall performance on power consumption, insertion loss, footprint, and modulation bandwidth is essential for harnessing large-scale integrated photonics. However, few proposed phase shifter schemes on various platforms have achieved a well-balanced performance. In this Letter, we experimentally demonstrate a thermo-optic phase shifter based on a densely distributed silicon spiral waveguide on a silicon-on-insulator platform. The phase shifter shows a well-balanced performance in all aspects. The electrical power consumption is as low as 3 mW to achieve a phase shift, the optical insertion loss is 0.9 dB per phase shifter, the footprint is under a standard silicon photonics fabrication process without silicon air trench or undercut process, and the modulation bandwidth is measured to be 39 kHz.
An optical phased array (OPA), the most promising non-mechanical beam steering technique, has great potential for solid-state light detection and ranging systems, holographic imaging, and free-space optical communications. A high quality beam with low sidelobes is crucial for long-distance free-space transmission and detection. However, most previously reported OPAs suffer from high sidelobe levels, and few efforts are devoted to reducing sidelobe levels in both azimuthal ( φ ) and polar ( θ ) directions. To solve this issue, we propose a Y-splitter-assisted cascaded coupling scheme to realize Gaussian power distribution in the azimuthal direction, which overcomes the bottleneck in the conventional cascaded coupling scheme and significantly increases the sidelobe suppression ratio (SLSR) in the φ direction from 20 to 66 dB in theory for a 120-channel OPA. Moreover, we designed an apodized grating emitter to realize Gaussian power distribution in the polar direction to increase the SLSR. Based on both designs, we experimentally demonstrated a 120-channel OPA with dual-Gaussian power distribution in both φ and θ directions. The SLSRs in φ and θ directions are measured to be 15.1 dB and 25 dB , respectively. Furthermore, we steer the beam to the maximum field of view of 25°×13.2° with a periodic 2λ pitch (3.1 μm). The maximum total power consumption is only 0.332 W with a thermo-optic efficiency of 2.7 mW/π .