Recycling scrap tires provides an alternative source of fine aggregates for the production of rubberized concrete and this will lead to significant increase in concrete frost resistance, environmental protection, and conservation of natural sand and gravel resources. In this paper, a total of 25 groups of rubberized concrete were produced by adding scrap tire rubber particles of different sizes, contents, and pretreatment methods to replace the fine aggregate, and their compressive strength during freeze–thaw cycles was studied from both the macro- and meso-perspectives. The results indicated that the decrease in concrete strength and weight was notably restricted by the presence of rubber particles during freeze–thaw cycles. The rubber fine aggregate with smaller particle sizes enhanced the concrete frost resistance more significantly, and the F100 of concrete with rubber particles of 1.0–2.0 mm increased from 76.6 to 86.5% by increasing the rubber content from 0.0 to 5.6%. The effects of rubber fine aggregate on concrete compressive strength during freeze–thaw cycles were quantified. On this basis, a forecast model for rubberized concrete compressive strength in freeze–thaw cycles was proposed, and the effects of the particle size, content, and pretreatment of the rubber particles were considered. The calculated results agreed well with the test results both in this study and the relevant peer studies, indicating that the model can provide a good reference for the design and engineering application of rubberized concrete in frigid environments.
Recycling scrap tyres as alternative aggregates of concrete is an innovative option. To clarify the dynamic properties of the pretreated rubberized concrete with some cumulative damage, the natural frequency, flexural dynamic stiffness, and damping ratio of the specimens under incremental stress level were investigated in this paper. The results indicated that the pretreatment of rubber particles improved the strength, ductility, and crack resistance of the rubberized concrete. The reduction of the flexural dynamic stiffness was clarified with the increase of concrete stress level. The addition of the pretreated rubber particles enhanced the concrete energy dissipation capacity during the destruction, and the specimen dissipated more energy with the increase of rubber content before its failure.
30 April 2025 in Construction and Building Materials