Huy Xuan Nguyen

Dr. Huy Xuan Nguyen

Electrical and Electronic, Nha Trang University, Nha Trang, Khánh Hòa, Vietnam
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HNHuy Xuan Nguyen
Huy Xuan Nguyen
CCChao-Ming Chen
Chao-Ming Chen
LLLE THANH LANH
LE THANH LANH
HLHsiao -Yi Lee
Hsiao -Yi Lee
The galvanometer scanning system plays a crucial role in modern laser material processing. With the development of this industry, the requirements for galvanometer scanners are getting higher and higher, especially to overcome the inherent disadvantages that still exist, such as image distortion, marking speed and accuracy in state-of-the-art scanning systems. In this paper, a single-axis optical scanner using two galvanometers in combination with one f-theta telecentric lens and a 343 nm femtosecond pulse laser source is proposed as a new approach for enhancing the precision of laser micromachining technology. The additional second galvanometer is used to manipulate the output laser beam of the first galvanometer to the path with less lens aberration to enhance the telecentricity correction and the effective scanning area. This is based on the international standard regulation ISO (the International Organization for Standardization) 11145:2018 requirements in optics and photonics, in which an important criterion is for the roundness of the focused beam spot to be greater than 87% to determine the effective working length of the proposed scanning system compared to the conventional scanning system. It is demonstrated by optical simulations and real optical experiments that the effective working length can be increased by 3.6 mm, corresponding to 8.1% of the effective scanning field, to achieve a laser material processing system with ISO standard. The damped least squares (DLS) algorithm in optical design software ZEMAX is used to optimize the deflected angle of the two galvanometers to obtain the optimal incident position of the f-theta lens.

24 June 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
HNHuy Xuan Nguyen
Huy Xuan Nguyen
TNThanh-Tuan Nguyen
Thanh-Tuan Nguyen
CLChau-Tan-Phat Le
Chau-Tan-Phat Le
We report statistically replicated molecular dynamics simulations of CuxCoCrFeNi (x = 0.5, 1.0, 1.5) nanowires under uniaxial tension at 100, 300, 600 and 900 K, using the Farkas-Caro embedded-atom method potential with n = 3-4 independent configurations per condition (CVUTS < 2.1% in all 12 cases). Seven mechanical parameters extracted from each stress-strain curve are read against Von Mises shear strain maps taken at three stages of deformation. The equiatomic composition exhibits a non-monotonic strength-toughness optimum. Cu1.0CoCrFeNi at 100 K records both the highest ultimate tensile strength (22.84 ± 0.37 GPa) and the highest toughness modulus (2.06 ± 0.09 GPa) of any condition studied, exceeding Cu0.5 in toughness by deltaUt = 0.20 GPa at essentially the same peak stress. The strain maps at 300 K identify three distinct failure routes: diffuse multi-zone slip in Cu0.5, a single shear band that forms abruptly in Cu1.0, and early planar fracture seeded by void nucleation in Cu1.5. The timing of plastic localisation differs across compositions. Cu1.0 remains in the low-strain regime at both the sub-UTS and near-UTS frames, whereas Cu0.5 already carries slip traces and Cu1.5 shows strain concentrating at two sites. This constitutes direct atomistic evidence for a delayed-localisation mechanism. Independently of composition, the 0.2% offset yield strength falls from roughly 7.5-8.5 GPa at 100 K to 2.2-2.6 GPa at 900 K while the hardening capacity (σUTS -σy)/σUTS rises from about 62% to about 85%, a shift attributed to thermally activated, surface-dominated dislocation nucleation. These results map the deformation pathways of CuxCoCrFeNi nanowires and provide quantitative guidance for designing nanostructured HEAs.

3 June 2024 in Photonics
Verified
Journal Article
Open access
PDF file
JCJui-Chen Chang
Jui-Chen Chang
YCYi-Chian Chen
Yi-Chian Chen
WLWei-Yu Lu
Wei-Yu Lu
HNHuy Xuan Nguyen
Huy Xuan Nguyen
HLHsiao -Yi Lee
Hsiao -Yi Lee
This research explores novel avenues for optimizing mosquito-catching efficiency using a multifaceted approach. While previous studies have primarily focused on singular parameters, such as light intensity or wind speed, this study delves into the intricate interplay between various factors. Experiment 1 challenges conventional wisdom by revealing a wider light divergence angle. When the reflective plate combined with the airflow board was set to 0 cm in length, the effectiveness of capturing mosquitoes was lower than that of the 3 cm unit, suggesting overlooked variables at play. Experiment 2 introduces a novel perspective by demonstrating the superior efficiency of the 5 cm unit, even with reduced wind speed and luminous area under optimized conditions, showcasing the significance of a holistic approach. Moreover, Experiment 3 uncovers nuanced insights, showcasing the differential performance of units in capturing small insects versus mosquitoes and moths, highlighting the need for tailored strategies. By integrating these findings, the study pioneers the development of two distinct mosquito collection units, emphasizing the critical importance of balancing diverse parameters for optimal results. The innovation lies in the thorough investigation of multifaceted optimization strategies, providing valuable insights to propel advancements in mosquito control technologies.


21 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
HNHuy Xuan Nguyen
Huy Xuan Nguyen
TNThanh-Tuan Nguyen
Thanh-Tuan Nguyen
CLChau-Tan-Phat Le
Chau-Tan-Phat Le
We report statistically replicated molecular dynamics simulations of CuxCoCrFeNi (x = 0.5, 1.0, 1.5) nanowires under uniaxial tension at 100, 300, 600 and 900 K, using the Farkas-Caro embedded-atom method potential with n = 3-4 independent configurations per condition (CVUTS < 2.1% in all 12 cases). Seven mechanical parameters extracted from each stress-strain curve are read against Von Mises shear strain maps taken at three stages of deformation. The equiatomic composition exhibits a non-monotonic strength-toughness optimum. Cu1.0CoCrFeNi at 100 K records both the highest ultimate tensile strength (22.84 ± 0.37 GPa) and the highest toughness modulus (2.06 ± 0.09 GPa) of any condition studied, exceeding Cu0.5 in toughness by deltaUt = 0.20 GPa at essentially the same peak stress. The strain maps at 300 K identify three distinct failure routes: diffuse multi-zone slip in Cu0.5, a single shear band that forms abruptly in Cu1.0, and early planar fracture seeded by void nucleation in Cu1.5. The timing of plastic localisation differs across compositions. Cu1.0 remains in the low-strain regime at both the sub-UTS and near-UTS frames, whereas Cu0.5 already carries slip traces and Cu1.5 shows strain concentrating at two sites. This constitutes direct atomistic evidence for a delayed-localisation mechanism. Independently of composition, the 0.2% offset yield strength falls from roughly 7.5-8.5 GPa at 100 K to 2.2-2.6 GPa at 900 K while the hardening capacity (σUTS -σy)/σUTS rises from about 62% to about 85%, a shift attributed to thermally activated, surface-dominated dislocation nucleation. These results map the deformation pathways of CuxCoCrFeNi nanowires and provide quantitative guidance for designing nanostructured HEAs.