The well‐developed high‐k technologies ease the integration complexity for HfO2‐based ferroelectric (FE) devices in the complementary metal‐oxide semiconductor processes. Sputtered HfxZr(1‐x)O2 (HZO) FEs have proven their thermal compatibility in back‐end‐of‐line (BEOL) integration processes with high remanent polarization (Pr) and a high cycling endurance. With the help of a tungsten oxide (WOx) bottom electrode, the sputtered HZO's FE properties are further advanced in this work. WOx is used to tune the oxygen content in the HZO film, providing an FE performance with a maximum 2Pr of 46 µC cm−2 and an endurance of 108 cycles. Based on this, sputtered HZO can compete with the atomic layer deposited HZO in the BEOL processes. In addition, WOx bottom electrodes enhance the FE capacitor behavior in a broad processing window, which relaxes the manufacturing restrictions.
14 June 2024 in ACS Applied Materials & Interfaces
The thermal compatibility of fully sputtered, ferroelectric TiN/HfxZr(1−x)O2/TiN thin‐film capacitors with back‐end‐of‐line processing is investigated. The sputtering power, ZrO2 concentration, and annealing temperature affect the crystal structure and ferroelectric properties of HfxZr(1−x)O2 (HZO) in different ways, which is revealed by the grazing incidence X‐ray diffraction and electric characterization. Moderate sputtering power and ZrO2 content favor the orthorhombic phase and higher remanent polarization. In contrast, low and high power or low and high ZrO2 concentrations increase the monoclinic and tetragonal/cubic phase fractions, respectively. For the first time, it is shown that annealing at 400 °C for 1 h can result in fully crystalline HZO films deposited by physical vapor deposition. Even pure HfO2 deposited from a 3 in. target with a sputtering power of 50 W exhibits some ferroelectric response after annealing at 400 °C and wakeup cycling.
23 November 2022 in ACS Applied Electronic Materials