This article deals with solving the urgent scientific problem of the diagnostics of drives of technological robotized workplaces with support of sensors. The dependence of diagnostic parameters on the technical state of drives of automated technological systems, which is of great economic importance for industrial enterprises, is being investigated. Diagnostic models have been developed based on sensory systems to diagnose drive models of technological robotized workplaces. The use of these models may also include monitoring systems in which it is possible to build a system for identifying detected changes. These systems identify many contradictory changes and thereby reduce the false alarm frequency of monitoring sensory systems. Numerous methods for solving technical diagnostics problems are often based on methods based on mathematical models describing work processes, as well as on spectral analysis of measured parameters, such as vibrations, noise, and electric current. A fuzzy inference system for assessing the technical condition, a system for estimating the residual resource of drives, and asystem for calculating diagnostic intervals based on fuzzy knowledge have been developed. Based on the historical trend of the diagnostic parameters, the intelligent diagnostic system determines the current technical condition of the actuator and predicts future technical condition changes, determines the remaining service life and the time intervals for diagnostics. The analysis of the time spent on planned preventive maintenance of technological equipment makes it possible to conclude that, after the modernization of equipment in 2018, the repair time was reduced from 350 h to 260 h per year (26%). Since 2019, there is a tendency to increase repair time by 30 h each year.

The article deals with integrating the inertial navigation unit implemented into the system of controlling the robot. It analyses the dynamic properties of the sensors of the inertial unit, for example, gyroscopes and accelerometers. The implementation of the original system of controlling the mobile robot on the basis of autonomous navigation systems is a dominant part of the article. The integration of navigational information represents the actual issue of reaching higher accuracy of required navigational parameters using more or less accurate navigation systems. The inertial navigation is the navigation based on uninterrupted evaluation of the position of a navigated object by utilizing the sensors that are sensitive to motion, that is, gyroscopes and accelerometers, which are regarded as primary inertial sensors or other sensors located on the navigated object.

Object grasping by robot hands is challenging due to the hand and object modeling uncertainties, unknown contact type and object stiffness properties. To overcome these challenges, the essential purpose is to achieve the mathematical model of the robot hand, model the object and the contact between the object and the hand. In this paper, an intelligent hand-object contact model is developed for a coupled system assuming that the object properties are known. The control is simulated in the Matlab Simulink/SimMechanics, Neural Network Toolbox and Computer Vision System Toolbox

In order to reduce the number and time of layups and to increase the period of effective operation of a mechatronic system it is reasonable to carry out predictive recovery works during one stoppage (repair) for a group of component parts with equal, close or multiple operation hours to the...

A simulation model of brushless DC motor (BLDC) control and diagnostics is considered. The model has been developed using a freeware complex “Modeling in technical devices”. Faults and diagnostic parameters of BLDC are analyzed. A logicallinguistic diagnostic model of BLDC has been developed on basis of fuzzy logic. The calculated rules determine dependence of technical condition on diagnostic parameters, their trends and utilized lifetime of BLDC. Experimental results of BLDC technical condition diagnostics are discussed. It is shown that in the course of BLDC degradation the motor condition change depends on diagnostic parameter values

The presented paper scientifically discusses the progressive diagnostics of electrical drives in robots with sensor support. The AI (artificial intelligence) model proposed by the authors contains the technical conditions of fuzzy inference rule descriptions for the identification of a robot drive’s technical condition and a source for the description of linguistic variables. The parameter of drive diagnostics for a robotized workplace that is proposed here is original and composed of the sum of vibration acceleration amplitudes ranging from a frequency of 6.3 Hz to 1250 Hz of a one-third-octave filter. Models of systems for the diagnostics of mechatronic objects in the robotized workplace are developed based on examples of CNC (Computer Numerical Control) machine diagnostics and mechatronic modules based on the fuzzy inference system, concluding with a solved example of the multi-criteria optimization of diagnostic systems. Algorithms for CNC machine diagnostics are implemented and intended only for research into precisely determined procedures for monitoring the lifetime of the mentioned mechatronic systems. Sensors for measuring the diagnostic parameters of CNC machines according to precisely determined measuring chains, together with schemes of hardware diagnostics for mechatronic systems are proposed.