Glacial till, widely distributed in southwest China, is a special soil directly deposited by detritus formed from melting Quaternary glaciers. In this paper, the F1 ionic soil stabilizer was adopted for stabilizing the glacial till to improve its mechanical strength. A series of micro and macro tests were carried out to study the mechanical properties and microstructure of stabilized soil with the F1 ionic soil stabilizer. The results show that the F1 ionic soil stabilizer can destroy the diffuse double layer structure on the surface of glacial till particles and reduce the thickness of the adsorbed water layer through strong cation exchange and hydrophobic interactions of active sulfonated oil, which reduce the spacing of glacial till particles, enhance the aggregation of glacial till particles, and effectively suppress the swelling deformation of the glacial till. It can be concluded that the water sensitivity and compaction characteristics of glacial till can be significantly improved by the stabilization of the F1 ionic soil stabilizer. Moreover, the mechanical strength of the glacial till can be significantly improved by the stabilization of the F1 ionic soil stabilizer. This article is helpful as a guideline for practical design and future research on applying the F1 ionic soil stabilizer to improve the bearing capacity of foundations in glacial till areas.
This study presents an in-depth investigation into optimizing the mix design of ultra-high-performance concrete (UHPC) for enhanced sulfate erosion resistance, utilizing the modified Andreasen and Andersen (MAA) method. By testing the mechanical properties and slump flow of UHPC, it was determined that the optimal W/B = 0.2, and the best volume content of steel fibers is 2%. Through long-term tests lasting 360 days on three groups of UHPC specimens under different curing conditions, their mass loss, compressive strength corrosion resistance coefficient, surface appearance, and erosion layer thickness were tested. The results indicate that under sulfate attack, the mass and compressive strength corrosion resistance coefficients of UHPC specimens showed a trend of first increasing and then decreasing, due to the formation and expansion of ettringite and gypsum. The thickness of the erosion layer increases over time. By 360 days, the internal damage caused by sulfate attack is about twice as severe as it was after 60 days. However, the addition of steel fibers was found to effectively mitigate these effects, reducing mass loss and preserving the structural integrity of UHPC.