Intelligent fault diagnosis of rotors always requires a large amount of labeled samples, but insufficient vibration signals can be obtained in operational rotor systems for detecting the fault modes. To solve this problem, a domain-adaptive transfer learning model based on a small number of samples is proposed. Time-domain vibration signals are collected by overlapping sampling and converted into time-frequency diagrams by using short-time Fourier transform (STFT) and characteristics in the time domain and frequency domain of vibration signals are reserved. The features of source domain and target domain are projected into the same feature space through a domain-adversarial neural network (DANN). This method is verified by a simulated gas generator rotor and experimental rig of rotor. Both the transfer in the identical machine (TIM) and transfer across different machines (TDM) are realized. The results show that this method has high diagnosis accuracy and good robustness for different types of faults. By training a large number of simulation samples and a small number of experimental samples in TDM, high fault diagnosis accuracy is achieved, avoiding collecting a large amount of experimental data as the source domain to train the fault diagnosis model. Then, the problem of insufficient rotor fault samples can be solved.
17 January 2025 in IEEE Transactions on Antennas and Propagation
The electromagnetic (EM) performance of radomes on high-speed flight vehicles is significantly degraded by the aerothermal heating load. To address this problem, a theoretical methodology has been developed for the design of radomes that are capable of performing superior electromagnetic performance at both ambient and high temperatures. Drawing on the idea of multi-design point approach, the proposed design method is devised by integrating the thermal effect, including structural deformation and change of material parameters, into the methodology. The samples of two-dimensional (2D) planar radomes were fabricated and the applicability of the proposed method was verified from both simulated and experimental perspectives. Furthermore, a three-dimensional (3D) tangent oval radome was designed using the proposed method. The results indicate that the designed radome structure is capable of maintaining both the gain and boresight error (BSE) of the antenna-radome system at desirable levels at both ambient and high temperatures.
A collision with clearance causes obvious nonlinearity in structures, and dynamic response analysis plays an important role in predicting the mechanical performance of the structure. The general form of the nonlinear dynamic equation of a structure and the clearance modeling method are introduced, and the clearance-caused nonlinear term is expressed by nonlinear impact forces. Different clearance collision models of local nonlinear structures are presented. The relationships between different impact forces and clearances are analyzed by two rigid sphere models. The solution methods of the nonlinear dynamic equation are compared by a vibro-impact response, such as the Newmark-β method combined with the Newton–Raphson method, generalized α method and precise integration method. The single degree of freedom model is adopted to compare the efficiency of the different numerical integration algorithms. Taking the beam structure model as a case study, the accurate nonlinear collision model with clearance is established by using the impact force model with high accuracy, and the accuracy of the model is verified by comparing the reference model with the numerical model.
High-temperature biaxial testing machines play an important role in the aerospace sector, being able to simulate complex mechanical and thermal environments similar to those encountered by airplanes in all phases of flight. This paper begins with an overview of the principles and development of high-temperature biaxial testing machines and then discusses their test methods as well as the testing machine’s measurement system. In addition, this paper emphasizes the importance of high-temperature biaxial testing in evaluating critical aerospace components, thereby underscoring its indispensable significance in improving the reliability and safety of aircraft. Finally, this paper identifies ongoing challenges and potential avenues for future research, including expanding material adaptability, improving the accuracy of the resulting simulations, and increasing testing capabilities under more demanding conditions.
7 October 2025 in Aerospace Science and Technology