To solve the problem of traditional engineering drilling rig propulsion systems being difficult to adapt to complex working conditions due to their bulky structure and poor load adaptability, this study proposes a new type of mechanical hydraulic composite electro-hydraulic proportional propulsion system. The system innovatively adopts a composite design of parallel hydraulic cylinders and movable pulley groups in mechanical structure, aiming to achieve system lightweighting through displacement multiplication effect. In terms of control strategy, a fuzzy adaptive PID controller based on position feedback was designed to improve the dynamic tracking performance and robustness of the system under nonlinear time-varying loads. The study established a multi physics domain mathematical model of the system and conducted joint simulation using AMESim and MATLAB/Simulink to deeply verify the overall performance of the proposed scheme. The simulation results show that the mechanical structure can stably achieve a 2:1 displacement multiplication effect, providing a feasible path for shortening the system size. Compared with traditional PID control, the proposed fuzzy adaptive PID control strategy significantly improves the positioning accuracy of the system. The maximum tracking errors of the master and slave hydraulic cylinders are reduced from 6.3 mm and 10.4 mm to 2.3 mm and 5.6 mm, respectively, and the accuracy is improved by 63.49% and 46.15%, providing theoretical support and technical reference for the design of engineering drilling rig propulsion control systems.
1 May 2023 in Journal of Physics: Conference Series
A mechanical model of the synchronous hydraulic system of the propulsion mechanism is established by taking the power head propulsion system of an engineering hydraulic drilling rig as the research subject. A master-slave regulation method based on the PID control strategy is proposed for the displacement deviation of two synchronous cylinders under the disturbance of external force. The method controls the synchronous accuracy of the two propulsion cylinders. Joint modeling and simulation with AMEsim and MATLAB are used to investigate the control performance of this synchronously controlled hydraulic cylinder under the disturbance of external forces. The results show that the system is subjected to an external load and cylinder 1 stabilizes after t=0.17s, and the synchronous control error between cylinder 1 and the expected value is 0.0005m. The stabilization error between cylinder 2 and cylinder 1 is 0.0006m; the power head propulsion system achieves the accuracy required for engineering construction and meets the working requirements of the engineering hydraulics drilling rig for the power head propulsion system.