Aiming to solve the problems of false detection, missed detection, and insufficient detection ability of infrared vehicle images, an infrared vehicle target detection algorithm based on the improved YOLOv5 is proposed. The article analyzes the image characteristics of infrared vehicle detection, and then discusses the improved YOLOv5 algorithm in detail. The algorithm uses the DenseBlock module to increase the ability of shallow feature extraction. The Ghost convolution layer is used to replace the ordinary convolution layer, which increases the redundant feature graph based on linear calculation, improves the network feature extraction ability, and increases the amount of information from the original image. The detection accuracy of the whole network is enhanced by adding a channel attention mechanism and modifying loss function. Finally, the improved performance and comprehensive improved performance of each module are compared with common algorithms. Experimental results show that the detection accuracy of the DenseBlock and EIOU module added alone are improved by 2.5% and 3% compared with the original YOLOv5 algorithm, respectively, and the addition of the Ghost convolution module and SE module alone does not increase significantly. By using the EIOU module as the loss function, the three modules of DenseBlock, Ghost convolution and SE Layer are added to the YOLOv5 algorithm for comparative analysis, of which the combination of DenseBlock and Ghost convolution has the best effect. When adding three modules at the same time, the mAP fluctuation is smaller, which can reach 73.1%, which is 4.6% higher than the original YOLOv5 algorithm.

Automatic modulation recognition (AMR) plays an essential role in modern communication systems. In recent years, various modulation recognition algorithms based on deep learning have been emerging, but the problem of low recognition accuracy has not been solved well. To solve this problem, based on the existing MCLDNN algorithm, in this paper, we proposed an improved spatiotemporal multi-channel network (IQ-related features Multi-channel Convolutional Bi-LSTM with Gaussian noise, IQGMCL). Firstly, dividing the input IQ signals into three channels, time sequence feature extraction is carried out for route I, route Q, and route IQ, respectively. For route IQ, convolution kernel (2,1) is first used to extract relevant features. Two layers of the small convolution kernel (1,3) are used to extract time sequence features further, and the three channels are used to extract features further. Then, a two-layer short-length memory network is used to extract features from time and space more effectively. Through comparison experiments, Bi-LSTM is introduced to replace one layer of LSTM, and a fully connected layer is removed to prevent overfitting. Finally, multiplicative Gaussian noise is introduced to naturally corrode the feature parameters, further improving the robustness and accuracy of the model. Experiments are carried out on three public datasets RML2016.10a, RML2016.10b, and RML2016.04C. The experiments show that the IQGMCL network has higher recognition accuracies on all datasets, especially on the RML2016.10a dataset. When the SNR is 4 dB, the recognition accuracy reaches 93.52%. When the SNR is greater than 0 dB, the average recognition accuracy reaches 92.3%, 1.31%, and 1.2% higher than the original MCLDNN network, respectively.

Reconstruction techniques for communication signals represent a significant research focus within the field of signal processing. To overcome the difficulty and low precision in reconstructing OFDM signals, we introduce a signal reconstruction technique called TOR-GAN (Transformer-Based OFDM Signal Reconstruction GAN). Reconstructing IQ sequences using a CNN and RNN presents challenges in capturing the correlations between two signals. To tackle this issue, the VIT (vision in transformer) approach was introduced into the discriminator network. The IQ signal is treated as a single-channel, two-dimensional image, divided into blocks of 2 × 2 pixels, with absolute position embedding added. The generator network maps the input noise to the same dimension as the IQ signal dimension × embedding vector dimension and adds two identical position embedding data points to the network learning. In the transformer network, prob sparse attention is employed as a replacement for multi-head attention to tackle the issue of high computational complexity. Finally, combined with the MLP structure, the transformer-based generator and discriminator are designed. The signal similarity evaluation index was constructed, and experiments showed that the reconstructed signal under QPSK and BPSK modulation had good reconstruction quality in the time-domain waveform, constellation diagram, and spectrogram at a high SNR. Compared with other reconstruction algorithms, the proposed algorithm improved the quality of the reconstructed signal while reducing the complexity of the algorithm.

This article proposes a novel fixed-frequency beam scanning leakage antenna based on a liquid crystal metamaterial (LCM) and adopting a metal column embedded microstrip line (MCML) transmission structure. Based on the microstrip line (ML) transmission structure, it was observed that by adding two rows of metal columns in the dielectric substrate, electromagnetic waves can be more effectively transmitted to reduce dissipation, and attenuation loss can be lowered to improve energy radiation efficiency. This antenna couples TEM mode electromagnetic waves into free space by periodically arranging 72 complementary split ring resonators (CSRRs). The LC layer is encapsulated in the transmission medium between the ML and the metal grounding plate. The simulation results show that the antenna can achieve a 106° continuous beam turning from reverse −52° to forward 54° at a frequency of 38 GHz with the holographic principle. In practical applications, beam scanning is achieved by applying a DC bias voltage to the LC layer to adjust the LC dielectric constant. We designed a sector-blocking bias feeder structure to minimize the impact of RF signals on the DC source and avoid the effect of DC bias on antenna radiation. Further comparative experiments revealed that the bias feeder can significantly diminish the influence between the two sources, thereby reducing the impact of bias voltage introduced by LC layer feeding on antenna performance. Compared with existing approaches, the antenna array simultaneously combines the advantages of high frequency band, high gain, wide beam scanning range, and low loss.