Walnut shell biochar (WSC) and wood powder biochar (WPC) prepared using the limited oxygen pyrolysis process were used as raw materials, and ZnCl2, KOH, H2SO4, and H3PO4 were used to modify them. The evaluation of the liquid-phase adsorption performance using methylene blue (MB) as a pigment model showed that modified biochar prepared from both biomasses had a mesoporous structure, and the pore size of WSC was larger than that of WPC. However, the alkaline modified was more conducive to the formation of pores in the biomass-modified biochar materials; KOH treatment resulted in the highest modified biochar-specific surface area. The isothermal adsorption of MB by the two biomass pyrolysis charcoals conformed to the Freundlich equation, and the adsorption process conformed to the quasi-second-order kinetic equation, which is mainly physical adsorption. The large number of oxygen-containing functional groups on the particle surface provided more adsorption sites for MB adsorption, which was beneficial to the adsorption reactions. The adsorption effects of woody biomass were obviously higher than that of shell biomass, and the adsorption capacities of the two raw materials’ pyrolysis charcoal were in the order of WPC > WSC. The adsorption effects of different treatment reagents on MB were in the order ZnCl2 > KOH > H3PO4 > H2SO4. The maximum adsorption capacities of the two biomass treatments were 850.9 mg/g for WPC with ZnCl2 treatment and 701.3 mg/g for WSC with KOH treatment.
1 September 2021 in Journal of Analytical and Applied Pyrolysis
Plant biomass, the most abundant and sustainable carbon source, offers a rich chemical space to design hard carbons for sodium ion batteries. However, the compositional complexity of biomass has for a long time compromised the predictability of the structural and electrochemical properties of carbon. Using the chemical-enzymatic fractionation technique, we successively remove non-lignocellulosic components, hemicellulose and cellulose to create a suite of precursors for carbonization, in order to understand the roles of each biomass component in battery performance. Brewer's spent grain, an agricultural waste, is used as a representative biomass platform. The resulting hard carbon, with non-lignocellulosic components removed prior to carbonization, exhibits a dramatically reduced surface area and an increased specific capacity. Simultaneously removing non-lignocellulosic components and hemicellulose results in more sp2 carbon, expanded (002) interlayer spacing, and a remarkably improved specific capacity by four fold. Further removing cellulose, with only lignin remaining, significantly reduces the sp2 carbon and undermines the cycling stability of the derived carbon. Our finding reveals that the electrochemical properties of the biomass-derived hard carbons in sodium ion batteries may be positively correlated with cellulose and lignin but negatively impacted by non-lignocellulosic components and hemicellulose. Guided by this knowledge, we further fractionated two additional biomasses, i.e. grape pomace and walnut shells, for improving the carbon performance. After removing non-lignocellulosic components and hemicellulose, the resulting hard carbon delivers a reversible capacity of 296 mA h g−1 at 50 mA g−1 and retains 86.4% capacity after 200 cycles. Therefore, our results lay the foundation for unlocking the potential of biomass-derived carbon materials by precise fractionation of biomass components.