Jiajie Zang

Dr. Jiajie Zang

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 December 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JZjianwen zhang
jianwen zhang
XFXin Feng
Xin Feng
JZJiaoqiao Zhou
Jiaoqiao Zhou
JZJiajie Zang
Jiajie Zang
JWJason Wang
Jason Wang
YLYunwei Li
Yunwei Li
Soft normally open point (SNOP) is an emerging solution for distributed networks (DNs) to address voltage violation and feeder congestion caused by the increasing integration of distributed energy resources and new types of loads. Based on power electronics, SNOPs can substitute traditional tie switches for power flow regulation, voltage adjustment, and power quality improvement, enhancing the DNs’ controllability and flexibility. Existing SNOPs found in demonstration projects and the literature are generally based on the back-to-back voltage-source converter (VSC). Because it requires more full-power-rating VSCs as the number of connected feeders increases, this solution is uneconomical in multifeeder flexible interconnection scenarios due to the high device cost and volume. Alternatively, this article proposes a series–shunt multiport SNOP (S 2 -MSNOP) based on a cascaded H-bridge structure and series–shunt arrangement. The proposed topology can easily extend its ports by increasing the number of submodules with small power ratings, reducing the device cost and volume. The operation principles and control strategies of the S 2 -MSNOP are elaborated. Verifications on both a 1-MVA simulation model and a 3.3-kVA scaled-down experimental platform prove the feasibility and effectiveness of the S 2 -MSNOP.

15 August 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JZjianwen zhang
jianwen zhang
HLHongming Li
Hongming Li
XKXinyi Kong
Xinyi Kong
JZJiaoqiao Zhou
Jiaoqiao Zhou
GSGang Shi
Gang Shi
JWJason Wang
Jason Wang
The multiport power electronic transformer (PET) is a critical equipment in ac/dc hybrid distribution grids, which has the functions of multidirectional power flow, flexible power flow regulation and reactive power control, and fault isolation. However, most proposed PETs have only a single-medium-voltage-ac (MVac) port, limiting their application scenarios in distribution grids. To address this problem, in this article, we propose a PET topology with multiple controllable MVac ports based on the cascaded H-bridge PET. The proposed PET topology can connect to multiple-MVac feeders and supply low-voltage-side loads through multiple terminals, achieving the full utilization of the remaining capacity of connected feeders, thus delaying the distribution capacity expansion and grid upgrade due to the rapid development of energy electrification. Besides, the decoupling control of active and reactive power for each feeder can be achieved. In this article, the operating principle, energy balance mechanism, control strategies, and design and comprehensive comparison of the proposed topology are studied. The simulation and experimental results demonstrate the validity of the proposed topology and control strategy.

3 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JZJiaoqiao Zhou
Jiaoqiao Zhou
JZjianwen zhang
jianwen zhang
JWJason Wang
Jason Wang
JZJiajie Zang
Jiajie Zang
GSGang Shi
Gang Shi
XCXu Cai
Xu Cai
SST have gained increasing interest lately. Topologies made of directly coupled MMC submodules (SM) and dual active bridge (DAB) modules have been introduced to form multi-port SSTs to interface different grid entities. Designated as modular SSTs (M-SSTs), such devices can interconnect distribution systems and enable flexible power flow control. However, the large cell capacitors needed to suppress power fluctuations are a major contributor to the SST's poor power density. This paper proposes a power fluctuation delivery (PFD) control for capacitance optimization. Through PFD control, the low frequency fluctuating power in MMC is transferred to DAB's secondary side and are automatically cancelled. And the cell capacitance requirement is significantly reduced. Considering the modified ripple power path, both power semiconductors and high frequency transformers in DABs are affected. Therefore, the design considerations of single cell (1 MMC SM + 1 DAB) with/without PFD control are elaborated for a 2 MVA M-SST example. It is shown that the cell capacitance can be reduced to 10% of its original value, and the power density of the whole cell is increased by 50% with 0.22% drop in overall efficiency. The feasibility of PFD method are verified by simulation and 4.8kVA experimental results.

28 December 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JZjianwen zhang
jianwen zhang
YLYong Liu
Yong Liu
JZJiaoqiao Zhou
Jiaoqiao Zhou
JZJiajie Zang
Jiajie Zang
GSGang Shi
Gang Shi
XYXingwu Yang
Xingwu Yang
High cost and large volume are always associated with the conventional unified power flow controller (UPFC) formed by two back-to-back connected voltage source converters and two transformers. Both additional series-connected converters and their adjacent transformers are necessitated when controlling the power flow among multiple transmission lines. Such implementation will further increase the cost and volume of the equipment owing to the port expansion. In this regard, this paper proposes a multiport transformer-less UPFC (MTUPFC) with easy terminal expandability. The decoupled active and reactive power flow are also controlled independently. This device presents several advantages, including low cost, light weight, fast dynamic response characteristics, and easy port expansion. The MTUPFC therefore has significant advantages in power grids with complex configuration and large-scale renewable energy integration. The operation principle and control strategies of the proposed MTUPFC are elaborated. The feasibility and effectiveness of the MTUPFC are verified by a 60-MVA simulation model and a 2.5-kVA scaled-down experimental platform, respectively.

11 April 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
JZjianwen zhang
jianwen zhang
YLYuwen Liu
Yuwen Liu
JZJiajie Zang
Jiajie Zang
ZLZichen Liu
Zichen Liu
JZJiaoqiao Zhou
Jiaoqiao Zhou
GSGang Shi
Gang Shi
Meshed dc grids help improve the current network's configuration, flexible power management, and reliable power supply. However, the existing power converters implemented in dc grids do not have enough controllability in adjusting each feeder's power, leading to transmission congestion, overloads, and high-power loss issues. The dc power flow controller (DCPFC) is prominent in addressing problems with a better system performance. This article proposes an embedded dc power flow controller (eDCPFC) with full-bridge modular multilevel converter (MMC) (FB-MMC) topology. The eDCPFC is directly integrated into a host MMC. The device's energy is balanced through the coordinated control of the eDCPFC and the host MMC without using isolation transformers or external power supplies. The working principle and the corresponding control strategies of the FB-MMC type eDCPFC and its host MMC are elaborated. Experimental results conducted in a scaled-down prototype validate the feasibility and effectiveness of the proposed topology and control schemes under typical working conditions.

1 July 2026 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LSLiqian Su
Liqian Su
GSGang Shi
Gang Shi
JZJiaoqiao Zhou
Jiaoqiao Zhou
JZJiajie Zang
Jiajie Zang
HCHaiqing Cai
Haiqing Cai
JZjianwen zhang
jianwen zhang
The half-bridge submodule (HBSM)-based centralized DC chopper (DCC) enables fault ride-through (FRT) in offshore wind power transmission systems. However, this solution suffers from SM capacitor overvoltage due to the unidirectional dissipation current. Existing modulation methods require additional SMs to achieve energy balancing, which increases investment costs. This paper proposes an energy-coordinated control that utilizes the receiving-end converter (REC) as an energy buffer. The capacitor energy of the DCC is temporarily stored in the REC before the surplus power is dissipated. Therefore, without adding extra SMs, the peak SM capacitor voltage of the DCC can be kept within its rated value. To improve rapid DC-link voltage regulation, an energy-decoupled control scheme is adopted for the REC. This scheme is coordinated with a hysteresis-based control of the DCC to ensure stable management of REC's energy. A controller hardware-in-the-loop (CHIL) experiment based on the StarSim Real-Time platform is conducted to validate the proposed method. The experimental results demonstrate that the SM capacitor voltages of the DCC and the REC, the DC-link voltage, and the internal energy fluctuation of the REC are all maintained within allowable limits, thereby ensuring reliable and economic FRT operation.