Having a healthy built environment becomes increasingly important, especially under the effects of COVID-19. This paper intends to combine sustainable goals based on climate change with passive design principles to achieve a healthy built environment regarding the building performance of residential buildings. The Yuedao Residential Community in the Lingnan area was taken as an example for the research. Based on relevant standards of healthy buildings, the thermal, light, and acoustic environment requirements were determined. The methods of building performance simulation and on-site measurement were used to quantify the research object environments. Then, the outcomes were obtained based on these standards. As observed, the thermal environment’s adaptive thermal comfort level was level III. It was hot indoors, but the light and acoustic environments met the requirements. Building designs based on a built environment optimized by external shading systems aim to solve problems through building performance simulation and qualitative analysis. After optimization, the thermal environment improved. According to the literature review, this research focused on a healthy built environment with a sustainable passive design in terms of building performance. A research workflow was established that could be used for more practical research, with abundant research methods. The problems were solved to varying degrees, and the Lingnan architectural culture was preserved. Moreover, this research filled the gap in interactive research on healthy built environments with sustainable passive design regarding building performance.
This research explored buildings for carbon neutrality to solve the global warming problem in the Third Solar Decathlon China (SDC). The methods were derived from subjective and objective evaluation aspects based on the competition rules. Then, the results of the concepts, technologies, and prospects of 15 buildings were output. The conclusion was summarized after a discussion as follows: (1) Solving global warming through carbon neutrality is widely required and research into this issue is required now. (2) Research methods were determined via five subjective and five objective contests with multiple sub-contests. (3) Fifteen buildings’ concepts, technologies, and prospects were determined regarding the carbon neutrality aspect. (4) A good architectural design concept was needed before building for carbon neutrality. (5) This research summarized the current development of architecture concepts and technologies in academia and industry. (6) Thirty-five kinds of active and passive technologies were determined, where PV as an active method and modular assembly as a passive method were the most used in this competition. (7) The technologies used with a low frequency, such as wind turbine, Stirling engine, hydrogen fuel cell, UHPC, PCM, and SST walls technologies, also need further attention. (8) The prospect of carbon neutrality, especially for energy production in residential buildings, may shift people’s passive acceptance of carbon neutrality to active energy production. (9) Using ANP to produce the SDC ranking may be considered for more scientific investigations to demonstrate the carbon neutrality effect. (10) The limitations will continue to be researched in the future. Finally, this research aimed to make a contribution to solving the global warming for sustainable development.