As one type of unmanned aerial vehicles, the quadrotor typically suffers from payload variations, system uncertainties, and environmental wind disturbances, which significantly deteriorate its attitude control performance. To provide high-speed, accurate, and robust attitude tracking performance for the quadrotor, an adaptive fast nonsingular terminal sliding mode (AFNTSM) controller is proposed in this article. The proposed AFNTSM controller combines the advantages of fast nonsingular terminal sliding mode (FNTSM), integral sliding mode, and adaptive estimation techniques, which are effective to achieve the desired tracking performance and suppress control signal chattering. Furthermore, unlike conventional methods, the adaptive estimation removes the requirements for the upper bound information of the disturbances. It is proved that the proposed AFNTSM can guarantee finite-time convergence and zero tracking error for the quadrotor attitude control. Finally, comparative study with the FNTSM control only and conventional sliding mode control is conducted through experiments and the results demonstrate that the proposed AFNTSM can achieve faster convergence and stronger robustness in line with theoretical analysis.
25 December 2024 in IEEE Robotics and Automation Letters
The significant differences in the physical properties of air and water pose a substantial challenge for the development of hybrid aerial-aquatic vehicle (HAAV), which leading to increased prototype size, heavier thrusters, and reduced efficiency or under-actuation in one of the mediums. This letter introduces “WuKong”, a HAAV with a simple structure, compact size, and high maneuverability. WuKong has a maximum width of only 300 mm in one dimension, with 2.48 thrust-to-weight ratio. Its operational range spans 20 m in the air and 3 m underwater, enabling seamless cross-domain maneuvers. These capabilities are attributed to the use of separate thrusters for aerial and aquatic, in conjunction with the proposed cross-domain hybrid control framework, and the incremental nonlinear dynamic inversion (INDI)-based underwater attitude control law. Through simulations and field experiments, WuKong's cross-domain transition capability and the underwater maneuverability performance are demonstrated. Our development provides a practical solution for HAAV applications and offers a platform for subsequent HAAV collaborative tasks.
Vertical take-off and landing (VTOL) configurations incur a structural weight penalty that reduces payload fraction and endurance compared to conventional fixed-wing and multirotor aircraft of comparable gross weight. To extend the endurance of VTOL UAVs, this work presents the design, analysis and control of a novel unmanned tilt trirotor aircraft with tandem wings, named Gong-H, featuring VTOL capability and high aerodynamic efficiency. A prototype of this aircraft was built with the rotor system mounted between tandem wings with a high wing coverage rate, which can achieve a more compact structure than other VTOL aircraft. The control forces and torques are provided not only by the rotor system in VTOL flight mode and the two tandem wings in cruise mode, but also by both the rotor system and wings in transition mode. Additionally, Computational Fluid Dynamics (CFD) simulations are conducted to optimize the wing configuration to improve the efficiency of cruise mode. Moreover, an airspeed-scheduled hybrid control framework based on incremental nonlinear dynamic inversion (INDI) and PID is adopted for different flight modes to improve the robustness of control and the stability of flight mode switching. Hover experiments confirm improved power efficiency compared to tilt quadrotor configuration, which extends endurance time and increases range. Additionally, complete flight cycle field experiments were conducted to demonstrate the aerodynamic feasibility of the prototype, including VTOL flight, cruise flight, and transition flight modes. Control surface redundancy tests and comparative INDI-PID validation under asymmetric disturbances further verify the practical robustness of the control framework. This work provides a design concept of VTOL aircraft and a practical solution for VTOL applications.