The accurate estimation of nearshore bathymetry is necessary for multiple aspects of coastal research and practices. The traditional shipborne single-beam/multi-beam echo sounders and Airborne Lidar bathymetry (ALB) have a high cost, are inefficient, and have sparse coverage. The Satellite-derived bathymetry (SDB) method has been proven to be a promising tool in obtaining bathymetric data in shallow water. However, current empirical SDB methods for multispectral imagery data usually rely on in situ depths as control points, severely limiting their spatial application. This study proposed a satellite-derived bathymetry method without requiring a priori in situ data by merging active and passive remote sensing (SDB-AP). It realizes rapid bathymetric mapping with only satellite remotely sensed data, which greatly extends the spatial coverage and temporal scale. First, seafloor photons were detected from the ICESat-2 raw photons based on an improved adaptive Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, which could calculate the optimal detection parameters for seafloor photons by adaptive iteration. Then, the bathymetry of the detected seafloor photons was corrected because of the refraction that occurs at the air–water interface. Afterward, the outlier photons were removed by an outlier-removal algorithm to improve the retrieval accuracy. Subsequently, the high spatial resolution (0.7 m) ICESat-2 derived bathymetry data were gridded to match the Sentinel-2 data with a lower spatial resolution (10 m). All of the ICESate-2 gridded data were randomly separated into two parts: 80% were employed to train the empirical bathymetric model, and the remaining 20% were used to quantify the inversion accuracy. Finally, after merging the ICESat-2 data and Sentinel-2 multispectral images, the bathymetric maps over St. Thomas of the United States Virgin Islands, Acklins Island in the Bahamas, and Huaguang Reef in the South China Sea were produced. The ICESat-2-derived results were compared against in situ data over the St. Thomas area. The results showed that the estimated bathymetry reached excellent inversion accuracy and the corresponding RMSE was 0.68 m. In addition, the RMSEs between the SDB-AP estimated depths and the ICESat-2 bathymetry results of St. Thomas, Acklins Island, and Huaguang Reef were 0.96 m, 0.91 m, and 0.94 m, respectively. Overall, the above results indicate that the SDB-AP method is effective and feasible for different shallow water regions. It has great potential for large-scale and long-term nearshore bathymetry in the future.
Qiandao Lake is located in the northern edge of subtropics, and its water body is thermally stratified in summer. It is of great scientific significance to study the vertical physical and chemical indexes and phytoplankton characteristics of the Qiandao Lake to reveal the aquatic ecosystem structure of the thermally stratified lake. Conventional observation uses in-situ profile instruments, which is time consuming and labor intensive. In recent years, lidar has shown increasing oceanic applications; however, it has not yet been extensively applied in inland water. There are no studies using lidar for detecting subsurface plankton layer in Qiandao Lake. In this study, we investigated the applicability of this technology for identifying subsurface plankton layer. A simple and fast phytoplankton layer detection method was introduced. The lidar-detected layer was found to well correspond with that of the in-situ measured subsurface chlorophyll maximum layer (SCML) and phycocyanin maximum layer. Primary results show that lidar and our detection method are effective for subsurface phytoplankton layer detection. They can serve as a good monitoring tool for studying inland water stratification.
Ocean color remote sensing technology has proven to be an indispensable tool for monitoring ocean conditions, as it has consistently provided critical data on global ocean optical properties, color, and biogeochemical parameters over several decades. With the rapid advancement of artificial intelligence, the integration of machine learning (ML) models into ocean color remote sensing has become a significant focus within the scientific community. This article provides a comprehensive review of the current status and challenges associated with ML models in ocean color remote sensing, assessing their applications in atmospheric correction, color inversion, carbon cycle analysis, and data reconstruction. This review highlights the advancements made in applying ML techniques, such as neural networks and deep learning, to improve data accuracy, enhance resolution, and enable more precise predictions of oceanic phenomena. Despite challenges such as model generalization and computational complexity, ML has significant potential for enhancing our understanding of marine ecosystems, facilitating real-time monitoring, and supporting global climate models.
9 May 2024 in ISPRS Journal of Photogrammetry and Remote Sensing
In recent years, oceanic lidar has seen a wide range of oceanic applications, such as optical profiling and detecting bathymetry. Furthermore, spaceborne lidars, CALIOP and ICESat-2, designed for atmospheric and ice science applications, have been used for ocean backscattering retrievals, but, until now, there has been no spaceborne lidar specifically designed for ocean detection. There is a demand for an effective lidar simulator to study the detection potential capability of spaceborne oceanic lidar. In this study, an open-source spaceborne oceanic lidar simulator named SOLS was developed, which is available freely. Moreover, the maximum detectable depth and corresponding optimal wavelength for spaceborne lidar were analyzed at a global scale by using SOLS. The factors controlling detection limits of a spaceborne ocean profiling lidar in different cases were discussed. Then, the maximum detectable depths with different relative measurement errors and the influence of solar background radiance were estimated. Subsequently, the effects of laser and detector parameters on maximum detectable depths were studied. The relationship between the lidar detectable depth and the ocean mixed layer depth was also discussed. Preliminary results show that the maximum detectable depth could reach deeper than 120 m in the oligotrophic sea at low latitudes. We found that 490 nm is the optimal wavelength for most of the open seawater. For coastal water, 532 nm is a more suitable choice considering both the technical maturity and geophysical parameters. If possible, a lidar equipped with 440 nm could achieve the greatest depth in oligotrophic seawater in subtropical gyres north and south of the equator. The upper mixed layer vertical structure in most of the global open ocean is within the lidar maximum detectable depth. These results show that SOLS can help the design of future spaceborne oceanic lidar systems a lot.