Zhijun Xu

Prof. Dr. Zhijun Xu


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 April 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ZXZhijun Xu
Zhijun Xu
PLPengfei Liang
Pengfei Liang
For the shallow and circular silo (SCS), when the aspect ratio is between 1.0 and 1.5, the lateral pressure especially dynamic pressure may cause destruction if the size of the silo is large. This paper proposed a modified calculation method of lateral pressure on the silo wall of SCS, considering the elasticities of silo wall and storage materials. The availability of shallow silo and deep silo methods, and the modified method were compared with the experiment and simulation. The results show that the Rankine’s formula is too conservative for the static lateral pressure, and the results of the modified method and Janssen formula are close to that of the experimental and simulation. For the dynamic lateral pressure calculation, Rankine theory is unsafe for the discharging load. The relative error of the dynamic lateral pressure based on Janssen theory is between 20 and 30%, which is too large. The dynamic lateral pressure calculated by the modified method is in good agreement with that of the experimental and simulation, and the relative error is less than 10%. Therefore, the modified method of lateral pressure formula is reasonable, which can provide guidance for the safety design of silo structure.

15 July 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
XLXudong Le
Xudong Le
XCXiuqin Cui
Xiuqin Cui
MZMengyang Zhang
Mengyang Zhang
ZXZhijun Xu
Zhijun Xu
LDLin Dou
Lin Dou
Pile easily develops necking defects during construction, which can limit the exertion of shaft resistance, resulting in reducing ultimate bearing capacity and creating potential safety hazards to projects. Based on transparent soil technology, this paper took the necking located in the middle part of pile shafts as an example and carried out vertical loading experiments on one intact pile and nine necking piles with caps. Then, the influences of necking length and diameter on the vertical bearing capacity were studied. The speckle field of the soil around piles was processed using the MatPIV program to investigate soil displacement. Through comparison and analysis with the intact pile, the reasons for the reduction in bearing capacity were obtained. The results show that the bearing capacity of the piles is seriously damaged by the necking. When the necking diameter is 4 mm and the necking length is 20 mm, the loss of vertical bearing capacity was 26.6%. The vertical bearing capacity decreases with the increase in necking length or the decrease in necking diameter. Pile necking makes a significant contribution to the displacement of soil around the cap. Inclined downward displacement of soil occurs near necking, which reduces the relative displacement between pile and soil and leads to the loss of pile resistance. For the necking with a large size, the soil displacement at the necking and around the pile cap is connected, which causes the displacement range of the soil under the pile cap to increase, resulting in a weakening of the exertion of shaft resistance. Subsequently, the vertical bearing capacity of piles is reduced.

1 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
ZXZhijun Xu
Zhijun Xu
ZGZhaoxiang Guo
Zhaoxiang Guo
This paper will employ the transparent soil experiment technology to explore the influences of shallow necking on the vertical bearing capacity of single pile with cap. Model experiment is carried out on one intact pile and nine shallow necking piles. The load‐settlement curves of all piles are obtained, which are used to study bearing characteristics of piles. The displacement fields of soil around piles are employed to investigate the reasons for the loss of vertical bearing capacity of piles with shallow necking. The vertical bearing capacity is greatly reduced which is caused by shallow necking. When the axial dimension of necking is the same, the larger the radial size is, the greater the loss of vertical bearing capacity is. When the radial dimension of necking is the same, the greater the axial size is, the greater the loss of vertical bearing capacity is. The soil near the pile shaft and under the pile cap produces a large area of vertical downward deformation, which causes the relative displacement between the pile shaft and the soil to greatly reduce. Therefore, it is easy that the necking piles with caps develop negative friction, which causes the vertical bearing capacity of piles to reduce. When the radial dimension of the shallow necking is 80% of pile diameter, the pile is easy to be damaged.

9 April 2013 in Journal of Central South University
Verified
Journal Article
Closed access
PDF file
ZXZhijun Xu
Zhijun Xu
JZJun-Jie Zheng
Jun-Jie Zheng
XBXiao-Ya Bian
Xiao-Ya Bian
YLYong Liu
Yong Liu

27 September 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZXZhijun Xu
Zhijun Xu
HYHanhua Yu
Hanhua Yu
The buoyancy of underwater can cause the underground granary to overall float, or even overturn, and the interaction between the soil and underground granary is the key to its stability. This paper introduces a non-contact experiment system utilizing the digital image correlation (DIC) technology and particle image velocity (PIV) technology, and its measurement accuracy is analyzed. Then, this system is employed to study the granary displacement and the soil deformation around the granary subjected to the buoyancy of water. Results show that with the increase of the degree of compaction of the soil around the granary, the floating water level increases by 10.77% and the vertical displacement decreases by 17%. When the soils around the granary are loose sands, the soil deformation range shows an obvious inverted triangle. When the soils are medium dense sands, the soil deformation zone concentrates at the junction of the conical granary bottom and granary wall. When the soils are dense sands, the disturbed range of the soil obviously reduces, and the soil deformation concentrates on both sides of the granary wall and is distributed symmetrically. Finally, taking the medium dense sands around the granary as an example, the reasons for the unstable failure of the granary subjected to buoyancy are discussed, assisted by the soil pressure theory of retaining wall. With the granary increasingly inclining, the soil deviating from the inclined direction of the granary loses its support, which drives the soils to reach the active limit state. The soil in the inclined direction of the granary is squeezed, resulting in passive soil pressure on the granary wall. The soil deformation increases continuously to a passive limit equilibrium state, and the soil continuously develops a sliding surface, resulting in the unstable failure of the granary. This research is expected to provide the technical guidance for the design and popularization of underground granaries.

1 January 2022 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
QYQingnian Yang
Qingnian Yang
JSJianli Shao
Jianli Shao
ZXZhijun Xu
Zhijun Xu
YMYu Miao
Yu Miao
Necking in different positions of a pile body has a significant influence on the bearing performance of a single pile. The transparent soil model experiment was adopted to investigate the impacts of necking positions on the vertical bearing capacity of a single pile and the soil deformation around the pile, and subsequently, the causes of the variation of bearing capacity were analyzed. The results show that the existence of necking does not change the bearing behavior of single pile as pile friction resistance. The bearing capacity of piles decreased by 8.21% and increased by 7.30% when the necking is located in the shallow and middle pile body, respectively, while it did not change significantly when the defects were in the deep part of the pile. The necking position has a significant effect on the deformation and deformation range of soil. The soils at the top, side, and near the end of a pile were mainly influenced by shallow necking, middle necking, and deep necking, respectively. The soils at the location of necking had apparent settlement phenomenon as the piles subsided. The soils at shallow necking’s locations were relatively loose, which reduced the side friction force of piles and finally resulted in a reduction of bearing capacity of a single pile. With the increase of the load, the soil around piles gradually developed penetration phenomenon (large deformation), while the soil at the end of pile moved up against pile settlement, which made the necking soil in the middle denser. The loss of side friction resistance was less than the resistance from the necking, which gave birth to an increase in the bearing capacity of a single pile. It was finally found that the side friction resistance and the resistance caused by necking were the main factors governing the bearing capacity of necking single piles.