Zhu Jie

Dr. Zhu Jie

Shanghai Maritime University, Shanghai, China
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
ZWZhongcheng Wang
Zhongcheng Wang
ZJZhu Jie
Zhu Jie
XLXiaoyu Liu
Xiaoyu Liu
Currently, in the two technological approaches for using diesel pilot injection to ignite methanol and partially substituting diesel fuel with methanol, neither can fully achieve carbon neutrality in the context of internal combustion engines. Compression-ignition direct-injection methanol marine engines exhibit significant application potential because of their superior fuel economy and lower carbon emissions. However, the low cetane number of methanol, coupled with its high ignition temperature and latent heat of vaporization, poses challenges, especially amidst increasingly stringent marine emission regulations. It is imperative to comprehensively explore the impacts of the engine geometry, intake boundary conditions, and injection strategies on the engine performance. This paper first investigates the influence of the compression ratio on the engine performance, subsequently analyzes the effects of intake conditions on methanol ignition characteristics, and finally compares the combustion characteristics of the engine under different fuel injection timings. When the compression ratio is set at 13.5, only an injection timing of −30 °CA can initiate methanol compression ignition, but the combustion is not ideal. For compression ratios of 15.5 and 17.5, all the injection timings studied can ignite methanol. Reasonable increases in the intake pressure and intake temperature are beneficial for methanol compression ignition. However, when the intake temperature rises from 400 K to 500 K, a decrease in the thermal efficiency is observed. Particularly, at an injection timing of −30 °CA, both the peak cylinder pressure and peak cylinder temperature are higher, the ignition occurs earlier, the combustion process shifts forward, and the combustion efficiency and indicated thermal efficiency are at higher levels. Furthermore, the overall emissions of NOX, HC, and CO are relatively low. Therefore, selecting an appropriate injection timing is crucial to facilitate the compression ignition and combustion of methanol under low-load conditions.

25 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
ZWZhongcheng Wang
Zhongcheng Wang
如李如泓 李
如泓 李
ZJZhu Jie
Zhu Jie
ZFZhenqiang Fu
Zhenqiang Fu
Ammonia, as a hydrogen carrier and an ideal zero-carbon fuel, can be liquefied and stored under ambient temperature and pressure. Its application in internal combustion engines holds significant potential for promoting low-carbon emissions. However, due to its unique physicochemical properties, ammonia faces challenges in achieving ignition and combustion when used as a single fuel. Additionally, the presence of nitrogen atoms in ammonia results in increased NOx emissions in the exhaust. High-temperature selective non-catalytic reduction (SNCR) is an effective method for controlling flue gas emissions in engineering applications. By injecting ammonia as a NOx-reducing agent into exhaust gases at specific temperatures, NOx can be reduced to N2, thereby directly lowering NOx concentrations within the cylinder. Based on this principle, a numerical simulation study was conducted to investigate two high-pressure injection strategies for sequential diesel/ammonia dual-fuel injection. By varying fuel spray orientations and injection durations, and adjusting the energy ratio between diesel and ammonia under different operating conditions, the combustion and emission characteristics of the engine were numerically analyzed. The results indicate that using in-cylinder high-pressure direct injection can maintain a constant total energy output while significantly reducing NOx emissions under high ammonia substitution ratios. This reduction is primarily attributed to the role of ammonia in forming NH2, NH, and N radicals, which effectively reduce the dominant NO species in NOx. As the ammonia substitution ratio increases, CO2 emissions are further reduced due to the absence of carbon atoms in ammonia. By adjusting the timing and duration of diesel and ammonia injection, tailpipe emissions can be effectively controlled, providing valuable insights into the development of diesel substitution fuels and exhaust emission control strategies.

14 October 2025 in Fire
Verified
Journal Article
Open access
PDF file
XLXiaoyu Liu
Xiaoyu Liu
ZJZhu Jie
Zhu Jie
ZWZhongcheng Wang
Zhongcheng Wang
ZFZhenqiang Fu
Zhenqiang Fu
MLMeirong Liu
Meirong Liu
Hydrogen fuel cell vessels represent a vital direction for green shipping, but the risk of large-scale hydrogen leakage and diffusion in their enclosed compartments is particularly prominent. To enhance safety, a simplified three-dimensional model of the deck-level cabins of the “Water-Go-Round” passenger ship was established using SolidWorks (2023) software. Based on a hydrogen leakage and diffusion model, the effects of leakage location, leakage aperture, and initial ambient temperature on the diffusion patterns and distribution of hydrogen within the cabins were investigated using FLUENT software. The results show that leak location significantly affects diffusion direction, with hydrogen leaking from the compartment ceiling diffusing horizontally much faster than from the floor. When leakage occurs at the compartment ceiling, hydrogen can reach a maximum horizontal diffusion distance of up to 5.04 m within 540 s; the larger the leak aperture, the faster the diffusion, with a 10 mm aperture exhibiting a 40% larger diffusion range than a 6 mm aperture at 720 s. The study provides a theoretical basis for the safety design and risk prevention of hydrogen fuel cell vessels.

20 April 2025 in Energies
Verified
Journal Article
Open access
PDF file
XLXiaoyu Liu
Xiaoyu Liu
ZJZhu Jie
Zhu Jie
ZWZhongcheng Wang
Zhongcheng Wang
Methanol has garnered attention as a promising alternative fuel for marine engines due to its high octane number and superior knock resistance. However, methanol-fueled engines face cold-start challenges under low-temperature conditions. Laser ignition technology, an emerging ignition approach, shows potential to replace conventional spark ignition systems. This study investigates the effects of laser ignition on combustion and emission characteristics of direct-injection methanol engines based on methanol fuel combustion mechanisms using the AVL-Fire simulation platform, focusing on optimizing key parameters, including ignition energy, longitudinal depth, and lateral position, to provide theoretical support for efficient and clean combustion in marine medium-speed methanol engines. Key findings include an ignition energy threshold (60 mJ) for methanol combustion stability, with combustion parameters (peak pressure, heat release rate) stabilizing when energy reaches ≥80 mJ, recommending 80 mJ as the optimal energy level (balancing ignition reliability and energy consumption economy). Laser longitudinal depth significantly influences flame propagation characteristics, showing a 23% increase in flame propagation speed at 15 mm depth and a reduction of unburned methanol mass fraction to 0.8% at the end of combustion.

Verified
Journal Article
Open access
PDF file
ZWZhongcheng Wang
Zhongcheng Wang
ZJZhu Jie
Zhu Jie
XLXiaoyu Liu
Xiaoyu Liu
JZJingjun ZHONG
Jingjun ZHONG
XJXin Jiang
Xin Jiang
With the increasing global demand for environmental protection and sustainable energy utilization, methanol, as a clean and renewable fuel, has become a research focus in the field of marine engines. However, its application in compression ignition engines faces bottlenecks such as low combustion efficiency and poor stability. Taking the L23/30H marine diesel engine as the research object, this paper establishes a combustion simulation model for a methanol/diesel dual-fuel direct-injection engine. The reliability of the model is ensured through grid independence verification and model calibration, and a coupled chemical reaction kinetic mechanism containing 126 species and 711 elementary reactions is constructed. A systematic study is conducted on the effects of injection strategies, including fuel operating modes, spray development patterns, injection intervals, and injection timing, on combustion characteristics. The results show that under the optimized injection strategy (vertical cross spray + synchronous injection) proposed in this study and operating conditions with a high methanol substitution ratio, the combustion efficiency, dynamic performance, and soot emission control effect of the dual-fuel mode are superior to those of the pure diesel mode. Simulation results show that the combined strategy of vertical cross injection and synchronous injection can significantly increase the indicated thermal efficiency (ITE) by 3.2%, reduce the brake specific fuel consumption (BSFC) by approximately 4.5%, advance the peak heat release by 2 °CA, and remarkably improve the combustion efficiency, while earlier injection timing is beneficial to air–fuel mixing. Further comparison of combustion and emission characteristics under different boundary conditions such as methanol energy ratios and injection pressures reveals that increasing methanol injection pressure, compression ratio, and initial pressure can improve combustion uniformity and reduce soot emissions, but NOx emissions increase, which requires the coordination of after-treatment technologies. Through the comprehensive optimization of multiple parameters, efficient and clean combustion under a high methanol substitution rate is achieved. This paper provides theoretical support and practical guidance for the technological development of marine methanol dual-fuel engines. In the future, industrial applications can be promoted by combining actual engine tests and after-treatment technologies.

9 July 2025 in Fire
Verified
Journal Article
Open access
PDF file
ZWZhongcheng Wang
Zhongcheng Wang
ZJZhu Jie
Zhu Jie
XLXiaoyu Liu
Xiaoyu Liu
JZJingjun ZHONG
Jingjun ZHONG
PLPeng Liang
Peng Liang
Due to the unique physicochemical properties of ammonia fuel, any leakages in the engine room will inevitably endanger ship safety. This study focuses on investigating the diffusion behavior of ammonia fuel within the engine room during ship navigation after leakage, aiming to identify hazardous points and implement measures, such as installing air-blowing and extraction devices, to mitigate the risks. To address potential leakage risks in ammonia-fueled ships, a simplified three-dimensional computational model was developed based on ship design drawings and field investigations. ANSYS Fluent software (2024 R2) was employed to simulate ammonia fuel leakage from pipelines and equipment, analyzing the diffusion patterns of leakage at different locations and evaluating the impact of adding air-blowing and extraction devices on leaked fuel in the engine room. The simulation results demonstrate that leakage at point 3 poses the greatest operational hazard, and ammonia fuel leakage during navigation generates combustible gas mixtures within the explosion limit range around the main engine, severely threatening both vessel safety and crew lives. Installing air-blowing and extraction devices in high-risk areas effectively reduces the explosion limit range of ammonia fuel, with air outlet 3 showing optimal mitigation effectiveness against ammonia fuel leakage during ship transportation.