Zongjie Yu

Dr. Zongjie Yu

orcid
Changsha University of Science and Technology

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 March 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Zongjie YuZongjie Yu
Zongjie Yu
XLXinpeng Ling
Xinpeng Ling
ZFZe Fan
Ze Fan
YZYueming Zhou
Yueming Zhou
ZMZhu Ma
Zhu Ma
The viscoelastic behavior of asphalt mixtures is a crucial consideration in the analysis of pavement mechanical responses and structural design. This study aims to elucidate the molecular structure and component evolution trends of polyphosphoric acid (PPA)/styrene butadiene styrene block copolymer (SBS)/styrene butadiene rubber copolymer (SBR) composite modified asphalt (CMA) under rolling thin film oven test (RTFOT) and pressure aging (PAV) conditions, as well as to analyze the viscoelastic evolution of CMA mixtures. First, accelerated aging was conducted in the laboratory through RTFOT, along with PAV tests for 20 h and 40 h. Next, the microscopic characteristics of the binder at different aging stages were explored using Fourier-transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. Additionally, fundamental rheological properties and temperature sweep tests were performed to reveal the viscoelastic evolution characteristics of CMA. Ultimately, the viscoelastic properties of CMA mixtures under dynamic loading at different aging stages were clarified. The results indicate that the incorporation of SBS and SBR increased the levels of carbonyl and sulfoxide factors while decreasing the level of long-chain factors, which slowed down the rate of change of large molecule content and reduced the rate of change of LMS by more than 6%, with the rate of change of overall molecular weight distribution narrowing to below 50%. The simultaneous incorporation of SBS and SBR into CMA mixtures enhanced the dynamic modulus in the 25 Hz and −10 °C range by 24.3% (AC-13), 15.4% (AC-16), and reduced the φ by 55.8% (AC-13), 40% (AC-16). This research provides a reference for the application of CMA mixtures in the repair of pavement pothole damage.

19 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
XXXiaodong Xie
Xiaodong Xie
JGJie Gao
Jie Gao
Zongjie YuZongjie Yu
Zongjie Yu
LSLiang Song
Liang Song
XZXuzhi Zhu
Xuzhi Zhu
This study systematically investigates the rheological modification mechanism of steel slag powder (SSP) as an alternative filler in asphalt mastics, with comparative analysis against conventional limestone powder (LP). Four filler-to-asphalt (F/A) ratios (0.6–1.2) were employed to prepare modified mastics. Comprehensive characterization through laser diffraction analysis, BET nitrogen adsorption, and scanning electron microscopy (SEM) revealed SSP’s significant microstructural advantages: a 29.2% smaller median particle size (D50) and 7.06% larger specific surface area compared to LP, accompanied by enhanced interparticle connectivity and morphological complexity. Rheological evaluation via dynamic shear rheology (DSR) demonstrated SSP’s superior performance enhancement—particularly at elevated F/A ratios (1.0–1.2), where multiple stress creep recovery (MSCR) tests showed a 6.9–46.06% improvement in non-recoverable creep compliance (Jnr) over LP-modified counterparts. The temperature sweep analysis indicated SSP’s effectiveness in reducing the temperature susceptibility index by 9.37–18.06% relative to LP. Fourier-transform infrared spectroscopy (FTIR) combined with two-dimensional correlation analysis (2D-COS) confirmed the dominance of physical interactions over chemical bonding in the SSP–asphalt interface. The results establish SSP’s dual functionality as both a rheological modifier and sustainable construction material, providing mechanistic insights for optimizing steel slag utilization in pavement engineering.

11 October 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Zongjie YuZongjie Yu
Zongjie Yu
XBXiaoyi Ban
Xiaoyi Ban
YXYafeng Xu
Yafeng Xu
XLXiaosong Liu
Xiaosong Liu
LMLei Ma
Lei Ma
YZYueming Zhou
Yueming Zhou
To prepare high-performance asphalt cold replacement liquids, a composite modification preparation process was used to synthesize a styrene–butadiene–styrene (SBS) block copolymer, styrene–butadiene–rubber (SBR) copolymer, and polyphosphate acid (PPA), erucamide/diesel/acrylic ester as surfactants/diluents/reinforcing agent respectively. These six were blended to prepare an asphalt cold replenishment liquid (ACRL), and its modification effect on base asphalt was studied using base asphalt as the control group. A comparative study was conducted on the high- and low-temperature rheological properties and microstructure. The modification mechanisms of high-temperature asphalt cold replenishment liquid (H-ACRL) and low-temperature asphalt cold replenishment liquid (L-ACRL) were studied through dynamic shear rheometry, bending beam rheometry, Fourier-transform infrared spectroscopy, fluorescence microscopy, and atomic force microscopy. The results showed that the optimal dosages of PPA/SBS/SBR in H-ACRL and L-ACRL were (1.2%/5%/3%) and (0.9%/4%/4%), respectively. Within the optimal dosage range, the particles in the cold replenishment fluid were uniformly dispersed in the asphalt to form a dense and continuous network. No new functional groups were generated during the preparation of H-ACRL and L-ACRL, showing that the modifiers (surfactants/diluents/reinforcing agent) were only physically blended with the asphalt.