Abdullah Mohammad Abu Arab

Mr. Abdullah Mohammad Abu Arab

King Faisal University, Al Hufūf, Ash Sharqīyah, Saudi Arabia
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
WAWaqas Ahmad
Waqas Ahmad
MAMuhammad Amin
Muhammad Amin
AAAyaz Ahmad
Ayaz Ahmad
SNSohaib Nazar
Sohaib Nazar
AAAbdullah Mohammad Abu Arab
Abdullah Mohammad Abu Arab
Recently, the high demand for marble stones has progressed in the construction industry, ultimately resulting in waste marble production. Thus, environmental degradation is unavoidable because of waste generated from quarry drilling, cutting, and blasting methods. Marble waste is produced in an enormous amount in the form of odd blocks and unwanted rock fragments. Absence of a systematic way to dispose of these marble waste massive mounds results in environmental pollution and landfills. To reduce this risk, an effort has been made for the incorporation of waste marble powder into concrete for sustainable construction. Different proportions of marble powder are considered as a partial substitute in concrete. A total of 40 mixes are prepared. The effectiveness of marble in concrete is assessed by comparing the compressive strength with the plain mix. Supervised machine learning algorithms, bagging (Bg), random forest (RF), AdaBoost (AdB), and decision tree (DT) are used in this study to forecast the compressive strength of waste marble powder concrete. The models’ performance is evaluated using correlation coefficient (R2), root mean square error, and mean absolute error and mean square error. The achieved performance is then validated by using the k-fold cross-validation technique. The RF model, having an R2 value of 0.97, has more accurate prediction results than Bg, AdB, and DT models. The higher R2 values and lesser error (RMSE, MAE, and MSE) values are the indicators for better performance of RF model among all individual and ensemble models. The implementation of machine learning techniques for predicting the mechanical properties of concrete would be a practical addition to the civil engineering domain by saving effort, resources, and time.

24 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
AAAyaz Ahmad
Ayaz Ahmad
MAMuhammad Amin
Muhammad Amin
WAWaqas Ahmad
Waqas Ahmad
SNSohaib Nazar
Sohaib Nazar
AAAbdullah Mohammad Abu Arab
Abdullah Mohammad Abu Arab
The application of supplementary cementitious materials (SCMs) in concrete has been reported as the sustainable approach toward the appropriate development. This research aims to compare the result of compressive strength (C-S) obtained from the experimental method and results estimated by employing the various modeling techniques for the fly-ash-based concrete. Although this study covers two aspects, an experimental approach and modeling techniques for predictions, the emphasis of this research is on the application of modeling methods. The physical and chemical properties of the cement and fly ash, water absorption and specific gravity of the aggregate used, surface area of the cement, and gradation of the aggregate were analyzed in the laboratory. The four predictive machine learning (PML) algorithms, such as decision tree (DT), multi-linear perceptron (MLP), random forest (RF), and bagging regressor (BR), were investigated to anticipate the C-S of concrete. Results reveal that the RF model was observed more exact in investigating the C-S of concrete containing fly ash (FA), as opposed to other employed PML techniques. The high R2 value (0.96) for the RF model indicates the high precision level for forecasting the required output as compared to DT, MLP, and BR model R2 results equal 0.88, 0.90, and 0.93, respectively. The statistical results and cross-validation (C-V) method also confirm the high predictive accuracy of the RF model. The highest contribution level of the cement towards the prediction was also reported in the sensitivity analysis and showed a 31.24% contribution. These PML methods can be effectively employed to anticipate the mechanical properties of concretes.

2 June 2022 in Polymers
Verified
Journal Article
Open access
PDF file
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
MIMudassir Iqbal
Mudassir Iqbal
Babatunde Abiodun SalamiBabatunde Abiodun Salami
Babatunde Abiodun Salami
MAMuhammad Amin
Muhammad Amin
IAIzaz Ahmad
Izaz Ahmad
FAZAL E JALALFAZAL E JALAL
FAZAL E JALAL
An accurate calculation of the flexural capacity of flexural members is vital for the safe and economical design of FRP reinforced structures. The existing empirical models are not accurately calculating the flexural capacity of beams and columns. This study investigated the estimation of the flexural capacity of beams using non-linear capabilities of two Artificial Intelligence (AI) models, namely Artificial neural network (ANN) and Random Forest (RF) Regression. The models were trained using optimized hyperparameters obtained from the trial-and-error method. The coefficient of correlation (R), Mean Absolute Error, and Root Mean Square Error (RMSE) were observed as 0.99, 5.67 kN-m, and 7.37 kN-m, for ANN, while 0.97, 7.63 kN-m, and 8.02 kN-m for RF regression model, respectively. Both models showed close agreement between experimental and predicted results; however, the ANN model showed superior accuracy and flexural strength performance. The parametric and sensitivity analysis of the ANN models showed that an increase in bottom reinforcement, width and depth of the beam, and increase in compressive strength increased the bending moment capacity of the beam, which shows the predictions by the model are corroborated with the literature. The sensitivity analysis showed that variation in bottom flexural reinforcement is the most influential parameter in yielding flexural capacity, followed by the overall depth and width of the beam. The change in elastic modulus and ultimate strength of FRP manifested the least importance in contributing flexural capacity.

3 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MAMuhammad Amin
Muhammad Amin
Babatunde Abiodun SalamiBabatunde Abiodun Salami
Babatunde Abiodun Salami
Muhammad ZahidMuhammad Zahid
Muhammad Zahid
MIMudassir Iqbal
Mudassir Iqbal
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
FAZAL E JALALFAZAL E JALAL
FAZAL E JALAL
The corrosion of steel reinforcement necessitates regular maintenance and repair of a variety of reinforced concrete structures. Retrofitting of beams, joints, columns, and slabs frequently involves the use of fiber-reinforced polymer (FRP) laminates. In order to develop simple prediction models for calculating the interfacial bond strength (IBS) of FRP laminates on a concrete prism containing grooves, this research evaluated the nonlinear capabilities of three ensemble methods—namely, random forest (RF) regression, extreme gradient boosting (XGBoost), and Light Gradient Boosting Machine (LIGHT GBM) models—based on machine learning (ML). In the present study, the IBS was the desired variable, while the model comprised five input parameters: elastic modulus x thickness of FRP (EfTf), width of FRP plate (bf), concrete compressive strength (fc′), width of groove (bg), and depth of groove (hg). The optimal parameters for each ensemble model were selected based on trial-and-error methods. The aforementioned models were trained on 70% of the entire dataset, while the remaining data (i.e., 30%) were used for the validation of the developed models. The evaluation was conducted on the basis of reliable accuracy indices. The minimum value of correlation of determination (R2 = 0.82) was observed for the testing data of the RF regression model. In contrast, the highest (R2 = 0.942) was obtained for LIGHT GBM for the training data. Overall, the three models showed robust performance in terms of correlation and error evaluation; however, the trend of accuracy was obtained as follows: LIGHT GBM > XGBoost > RF regression. Owing to the superior performance of LIGHT GBM, it may be considered a reliable ML prediction technique for computing the bond strength of FRP laminates and concrete prisms. The performance of the models was further supplemented by comparing the slopes of regression lines between the observed and predicted values, along with error analysis (i.e., mean absolute error (MAE), and root-mean-square error (RMSE)), predicted-to-experimental ratio, and Taylor diagrams. Moreover, the SHAPASH analysis revealed that the elastic modulus x thickness of FRP and width of FRP plate are the factors most responsible for IBS in FRP.

24 August 2022 in Materials
Verified
Journal Article
Open access
PDF file
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
Babatunde Abiodun SalamiBabatunde Abiodun Salami
Babatunde Abiodun Salami
Arshad JamalArshad Jamal
Arshad Jamal
MAMuhammad Amin
Muhammad Amin
Muhammad UsmanMuhammad Usman
Muhammad Usman
MIMudassir Iqbal
Mudassir Iqbal
The depletion of natural resources of river sand and its availability issues as a construction material compelled the researchers to use manufactured sand. This study investigates the compressive strength of concrete made of manufactured sand as a partial replacement of normal sand. The prediction model, i.e., gene expression programming (GEP), was used to estimate the compressive strength of manufactured sand concrete (MSC). A database comprising 275 experimental results based on 11 input variables and 1 target variable was used to train and validate the developed models. For this purpose, the compressive strength of cement, tensile strength of cement, curing age, Dmax of crushed stone, stone powder content, fineness modulus of the sand, water-to-binder ratio, water-to-cement ratio, water content, sand ratio, and slump were taken as input variables. The investigation of a varying number of genetic characteristics, such as chromosomal number, head size, and gene number, resulted in the creation of 11 alternative models (M1-M11). The M5 model outperformed other created models for the training and testing stages, with values of (4.538, 3.216, 0.919) and (4.953, 3.348, 0.906), respectively, according to the results of the accuracy evaluation parameters root mean square error (RMSE), mean absolute error (MAE), and coefficient of determination (R2). The R2 and error indices values revealed that the experimental and projected findings are in extremely close agreement. The best model has 200 chromosomes, 8 head sizes, and 3 genes. The mathematical expression achieved from the GEP model revealed that six parameters, namely the compressive and tensile strength of cement, curing period, water–binder ratio, water–cement ratio, and stone powder content contributed effectively among the 11 input variables. The sensitivity analysis showed that water–cement ratio (46.22%), curing period (25.43%), and stone powder content (13.55%) were revealed as the most influential variables, in descending order. The sensitivity of the remaining variables was recorded as w/b (11.37%) > fce (2.35%) > fct (1.35%).

21 June 2022 in Materials
Verified
Journal Article
Open access
PDF file
KKKAFFAYATULLAH KHAN
KAFFAYATULLAH KHAN
FAZAL E JALALFAZAL E JALAL
FAZAL E JALAL
Mohsin Ali KhanMohsin Ali Khan
Mohsin Ali Khan
Babatunde Abiodun SalamiBabatunde Abiodun Salami
Babatunde Abiodun Salami
MAMuhammad Amin
Muhammad Amin
MIMudassir Iqbal
Mudassir Iqbal
Stabilized aggregate bases are vital for the long-term service life of pavements. Their stiffness is comparatively higher; therefore, the inclusion of stabilized materials in the construction of bases prevents the cracking of the asphalt layer. The effect of wet–dry cycles (WDCs) on the resilient modulus (Mr) of subgrade materials stabilized with CaO and cementitious materials, modelled using artificial neural network (ANN) and gene expression programming (GEP) has been studied here. For this purpose, a number of wet–dry cycles (WDC), calcium oxide to SAF (silica, alumina, and ferric oxide compounds in the cementitious materials) ratio (CSAFRs), ratio of maximum dry density to the optimum moisture content (DMR), confining pressure (σ3), and deviator stress (σ4) were considered input variables, and Mr was treated as the target variable. Different ANN and GEP prediction models were developed, validated, and tested using 30% of the experimental data. Additionally, they were evaluated using statistical indices, such as the slope of the regression line between experimental and predicted results and the relative error analysis. The slope of the regression line for the ANN and GEP models was observed as (0.96, 0.99, and 0.94) and (0.72, 0.72, and 0.76) for the training, validation, and test data, respectively. The parametric analysis of the ANN and GEP models showed that Mr increased with the DMR, σ3, and σ4. An increase in the number of WDCs reduced the Mr value. The sensitivity analysis showed the sequences of importance as: DMR > CSAFR > WDC > σ4 > σ3, (ANN model) and DMR > WDC > CSAFR > σ4 > σ3 (GEP model). Both the ANN and GEP models reflected close agreement between experimental and predicted results; however, the ANN model depicted superior accuracy in predicting the Mr value.