Muhammad Abrar Akram

Dr. Muhammad Abrar Akram

New York University Abu Dhabi
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 November 2017 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
WHWook Hong
Wook Hong
IHIn-Chul Hwang
In-Chul Hwang
A fully standard-cell-based digital low-dropout (D-LDO) regulator with low-level quiescent current and fast load transient response is proposed for efficient power management in a system-on-a-chip (SoC). For the design of a fast and accurate voltage comparator, we propose a logic-threshold triggered comparator (LTTC) based on a standard CMOS digital inverter. The LTTC is employed to implement the binary voltage comparator for a bang-bang loop control and a multi-mode detector which senses the output voltage with three segmented ranges during its transition, is also employed. Further, we implement a multi-loop controller composed of components, such as a fixed-gain accumulator (FG-ACC), successive approximation register (SAR), and variable-gain accumulator (VG-ACC), which accelerate the transient response while being switched over adaptively to the finely-segmented voltage range. In particular, the proposed VG-ACC enables a constant unity-gain frequency overload current variation such that it enhances the load transient response in terms of over/undershoot and settling time. The proposed D-LDO is fabricated using a 65-nm CMOS process technology with an active area of 0.014mm2. The measurement results show a peak current efficiency of 99.97% with the enhanced load-transient response and load regulation of 2.08 μs and 0.040 mV/mA, respectively, with a 20-MHz clock.

16 October 2018 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
WHWook Hong
Wook Hong
IHIn-Chul Hwang
In-Chul Hwang
This paper presents a capacitorless self-clocked digital low-dropout (SC-DLDO) regulator with self-shifting bidirectional shift registers (SS-BiSHRs) for power management applications in a system-on-chip (SoC). The load transient response is accelerated by utilizing coarse-then-fine control. Our voltage-range detector ensures accurate transition between coarse and fine loops without glitches or spikes in the output voltage. Moreover, the proposed SS-BiSHRs reduce the transient response time while minimizing the voltage under/overshoot. In addition, we propose a unary-binary segmentation (UBS) scheme of the power transistors. The UBS scheme offers a good balance between speed and resolution of the switch array. The proposed SC-DLDO fabricated on a 65-nm CMOS process with an active area of 0.069 mm 2 achieves a minimum dropout voltage of 40 mV or less at the input voltage of 0.7-1.2 V. The measurement results show that with the step load current alternating between 1 and 90 mA, the proposed capacitorless SC-DLDO shows a transient response time of 77 ns with an undershoot of 96 mV at a regulated output voltage of 0.66 V and it attains the peak current and power efficiencies of 99.86% and 94.16%, respectively.

28 July 2020 in IEEE Access
Verified
Journal Article
Open access
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
IHIn-Chul Hwang
In-Chul Hwang
Sohmyung HaSohmyung Ha
Sohmyung Ha
Digital Low-dropout (DLDO) regulators have been widely utilised for highly-efficient fine-grained power delivery and management in system-on-chips (SoCs) due to their process scalability, ease of integration, and low-voltage operation. However, conventional DLDOs suffer gravely from the power-speed tradeoff, which arises from the use of sampling clocks. To obtain reasonable performance in the undershoot and recovery during load transient states, a large output capacitor is inevitably required in these DLDOs. Moreover, they inherently involve large steady-state voltage ripples and poor power-supply rejection (PSR). These limitations of synchronous DLDOs and their counter measures are thoroughly discussed in this paper. Various design strategies of major building blocks, i.e. comparators and power transistor arrays, are explained in detail with examples. Architectural advances are also expounded including state-of-the-art DLDO architectures such as clock-boosted synchronous, analog-assisted synchronous, asynchornous, event-driven, and hybrid DLDOs. These state-of-the-art DLDOs do not only address the power-speed tradeoff and achieve fast load transient responses, but also can eliminate the use of an output capacitor in some cases. Moreover, some hybrid DLDOs successfully removed the steady state ripples and achieve high PSR. All of these DLDO are compared on basis of their performance metrics and figure-of-merits (FOMs).

15 July 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
KKKyung-Sung Kim
Kyung-Sung Kim
Sohmyung HaSohmyung Ha
Sohmyung Ha
IHIn-Chul Hwang
In-Chul Hwang
This article presents an output-capacitorless digital low-dropout regulator (OCL-DLDO) for fine-grained on-chip power delivery and management in system-on-chip devices. The proposed OCL-DLDO incorporates three distinct feedback loops: asynchronous, coarse, and fine loops. The asynchronous loop is activated during drastic load transients, rapidly restoring the output voltage and achieving a small voltage undershoot even without any output capacitor. The coarse loop, which is equipped with adaptive gain adjustment logics based on least-mean-square algorithm, adaptively adjusts the connection of power switches for fast and accurate voltage regulation. Lastly, the fine loop, which is implemented with shift-registers-based control, takes over the control in steady-states for low output voltage ripples and quiescent current. The proposed OCL-DLDO was fabricated in 65 nm CMOS process with an active area of 0.041 mm 2 . The measurement results show that the proposed OCL-DLDO achieves a peak current efficiency of 99.91% and a figure-of-merit as low as 2.87 fs when driving 25 mA of load current.

5 October 2022 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
Sohmyung HaSohmyung Ha
Sohmyung Ha
This letter presents a fully differential CMOS bootstrap rectifier with an effective dynamic threshold voltage (i.e., ${V}_{\text{TH}}$ ) compensation (DVC). The bootstrapping circuit for DVC, which consists of a dynamically biased transistor, a series resistor, and a parallel capacitor, dynamically generates a compensation voltage for the main rectifying pass transistors only when the ${V}_{\text{TH}}$ compensation is required. It significantly increases the proposed rectifier's power conversion efficiency (PCE) compared to other bootstrap rectifiers. The proposed rectifier operates at an industrial, scientific, and medical (ISM) band frequency of 434 MHz, and it is fabricated in a 0.18- $\mu$ m CMOS process together with two conventional bootstrap rectifiers for performance comparison. Measurement results validate that the proposed rectifier outperforms the conventional bootstrap rectifiers in terms of the output dc voltage level, voltage conversion ratio, and PCE. The proposed rectifier attains a peak PCE of 71 $\%$ at a load resistor of 3 k $\Omega$ and an operating frequency of 434 MHz.

27 October 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
JJJin-Woong Jang
Jin-Woong Jang
IWIbrar Ali Wahla
Ibrar Ali Wahla
JCJunsik Choi
Junsik Choi
Muhammad Abrar AkramMuhammad Abrar Akram
Muhammad Abrar Akram
IHIn-Chul Hwang
In-Chul Hwang
In this brief, a fully-integrated output-capacitor-free (OCF) digital low-dropout regulator (DLDO) is proposed utilizing a current-estimation algorithm (CEA)-based coarse loop controller to achieve fast voltage droop ( ${V}_{Droop}$ ) recovery with improved line and load regulations. The proposed CEA-based controller quickly determines the target output switch-code by estimating the current-voltage ratio of power mosfet s, enabling fast ${V}_{Droop}$ recovery during load current ( $\mathit{I}_\mathit{LOAD}$ ) transients. Complementing the CEA-based coarse loop, the proposed OCF-DLDO incorporates asynchronous and fine loops. The asynchronous loop supplies an instant dynamic current during $\mathit{I}_\mathit{LOAD}$ transients, rapidly restoring the $\mathit{V}_\mathit{OUT}$ , while the fine loop reduces output voltage ripples and quiescent current during steady-state of the DLDO. The proposed OCF-DLDO was fabricated in a 65-nm CMOS process with an active area of 0.075 mm $^{2}$ . Measurement results demonstrate that the proposed DLDO operates with an input voltage range of 0.6 $-$ 1.2 V. For a load current step of 26 mA at $\mathit{V}_\mathit{DD}$ = 0.6 V, the proposed DLDO recovers a $\mathit{V}_\mathit{Droop}$ of 140 mV within 95 ns achieving a figure-of-merit of 3.74 ns with a peak current efficiency of 99.6 $\%$ .