Thanks to the development of 5G networks, edge computing has gained popularity in several areas of technology in which the needs for high computational power and low time delays are essential. These requirements are indispensable in the field of robotics, especially when we are thinking in terms of real-time autonomous missions in mobile robots. Edge computing will provide the necessary resources in terms of computation and storage, while 5G technologies will provide minimal latency. High computational capacity is crucial in autonomous missions, especially for cases in which we are using computationally demanding high-level algorithms. In the case of Unmanned Aerial Vehicles (UAVs), the onboard processors usually have limited computational capabilities; therefore, it is necessary to offload some of these tasks to the cloud or edge, depending on the time criticality of the application. Especially in the case of UAVs, the requirement to have large payloads to cover the computational needs conflicts with other payload requirements, reducing the overall flying time and hindering autonomous operations from a regulatory perspective. In this article, we propose an edge-based architecture for autonomous UAV missions in which we offload the high-level control task of the UAV’s trajectory to the edge in order to take advantage of the available resources and push the Model Predictive Controller (MPC) to its limits. Additionally, we use Kubernetes to orchestrate our application, which runs on the edge and presents multiple experimental results that prove the efficacy of the proposed novel scheme.

With the wide deployment of autonomous multi-agent robotic systems, control solutions based on centralized algorithms have been developed. Even though these centralized algorithms can optimize the performance of the multi-agent robotic systems, they require a lot of computational effort, and a centralized unit to undertake the whole process. Yet, many robotic platforms like some ground robots and even more, aerial robots, do not have the computing capacity to execute this kind of frameworks on their on onboard computers. While cloud computing has been used as a solution for offloading computationally demanding robotic applications, from the robots to the cloud servers, the latency they introduce to the system has set them unsuitable for time sensitive applications. To overcome these challenges, this article promotes an Edge computing-based Centralized Nonlinear Model Predictive Control (E-CNMPC) framework to control, and optimize, in swarm formation, the trajectory of multiple ground robotic agents, while taking under consideration potential collisions. The data processing procedure for the time critical application of controlling the robots in a centralized manner, is offloaded to the edge machine, thus the framework benefits from the provided edge resources, features, and centralized optimal performance, while the latency remains bounded in desired values. Besides, real experiments were conducted as a proof-of-concept of the proposed framework to evaluate the system’s performance and effectiveness.

This paper presents a novel framework based on edge computing, implemented using Kubernetes orchestration, to optimally offload the computational tasks required for centralized control of multiple robotic agents. Edge-based centralized control architectures are prone to failure due to communication delays. The proposed framework computes the maximum round-trip time delay for which the system remains stable and modifies the controller parameters to ensure the control computation within the critical time. For higher processing and communication delays, the complexity of the controller needs to be reduced by reducing the number of agents, the prediction horizon, and the efficient use of edge resources. The edge resources are dynamic, and the controller needs to be designed to guarantee the online computation within a desired time. A dynamic resource allocation method (based on an approximate function of the controller parameters, complexity, and computational resources) is proposed to design the controller parameters to ensure the bounded computation time. To validate the effectiveness of the proposed approach, we conduct experimental evaluations that analyze system behavior under various conditions, providing valuable insights into the performance, scalability, and robustness of multi-agent control systems deployed on edge infrastructure.

Aerial manipulators, combining aerial robots with robotic arms, have emerged as highly effective for a wide range of applications, especially in aerial physical interaction. To effectively detect surfaces and perform physical interactions, these systems must accurately perceive the target's location and execute precise visual servoing. This paper introduces a novel system design and framework to enable safe physical contact with defined surfaces. The system consists of an aerial platform equipped with a lightweight tendon-driven, 3-DoF robotic arm, an RGB-D camera for detecting targets and guiding the arm to achieve the desired end-effector positioning, and essential sensors for precise localization of the platform. Results in outdoor experiments showed the system successfully performing physical inspections in industrial environments subject to light variations and windy conditions. The low inertia of the moving arm has no influence on the aerial platform, and its passive damping stabilizes the robot during contact phases. The superiority of the neural-based target detection compared to the model-based has been examined. By reaching the limits of the system at high altitudes and in strong winds, we emphasize the importance of the backup pilot when deploying robots to come in contact with infrastructures. To enable the reproducibility of our result, the dataset for computer vision, design of the arm, and simulation are shared.

Cloud robotics has emerged as a promising technology for robotics applications due to its advantages of offloading computationally intensive tasks, facilitating data sharing, and enhancing robot coordination. However, integrating cloud computing with robotics remains a complex challenge due to network latency, security concerns, and the need for efficient resource management. In this work, we present a scalable and intuitive framework for testing cloud and edge robotic systems. The framework consists of two main components enabled by containerized technology: (a) a containerized cloud cluster and (b) the containerized robot simulation environment. The system incorporates two endpoints of a User Datagram Protocol (UDP) tunnel, enabling bidirectional communication between the cloud cluster container and the robot simulation environment, while simulating realistic network conditions. To achieve this, we consider the use case of cloud-assisted remote control for aerial robots, while utilizing Linux-based traffic control to introduce artificial delay and jitter, replicating variable network conditions encountered in practical cloud-robot deployments.