This paper proposes swarm intelligence based approach for the real time coordination of groups of UAVs (Unmanned Aerial Vehicles) in tasks where values that are sensed from the aerial platform can be used to qualify the individuals. In particular, as an example application, here we consider environmental monitoring UAV teams. Their function is to monitor an area and when some undesired environmental condition arises, coordinate themselves to find the source as fast as possible. The swarm based algorithm has been extensively tested using a 3D simulation platform and validated with real UAVs flying over an industrial area.

This paper describes the design and the control architecture of an unsupervised robot developed for grit blasting ship hulls in shipyards. Grit blasting is a very common and environmentally unfriendly operation, required for preparing metallic surfaces for painting operations. It also implies very unhealthy and hazardous working conditions for the operators that must carry it out. The robot presented here has been designed to reduce the environmental impact of these operations and completely eliminate the health associated risks for the operators. It is based on a double frame main body with magnetic legs that are able to avoid the accumulation of ferromagnetic dust during its operation. The control system presents a layered structure with four layers that are physically distributed into two separate components in order to facilitate different operational modes as well as to increase the safety requirements of the system. A low-level control component has been implemented on the robotic unit itself, and a mission planning and control component has been developed on a base station that is also used for interaction with the operator, when the monitoring of the robot's operation is required. This base station component contains three layers of the control system that permit the manual, semiautonomous and autonomous operation of the whole system. A prototype of the robot has been implemented and tested in realistic environments, ascertaining that the design and the control system are perfectly suited to the functions which the robot must carry out.

The nonlinear problem of sensing the attitude of a solid body is solved by a novel implementation of the Kalman Filter. This implementation combines the use of quaternions to represent attitudes, time-varying matrices to model the dynamic behavior of the process and a particular state vector. This vector was explicitly created from measurable physical quantities, which can be estimated from the filter input and output. The specifically designed arrangement of these three elements and the way they are combined allow the proposed attitude estimator to be formulated following a classical Kalman Filter approach. The result is a novel estimator that preserves the simplicity of the original Kalman formulation and avoids the explicit calculation of Jacobian matrices in each iteration or the evaluation of augmented state vectors.

This paper deals with the design and construction of a climbing robot for performing grit blasting operations in shipyards. The robot is based on a double sliding platform that uses permanent magnets for attachment. It is lightweight and compact and can move up and along the shipside with any inclination while grit blasting the surface to pre-specified surface quality levels. It can also rotate to compensate for hull curvature and to avoid obstacles while performing its task. The blasting operation is modulated by a vision based quality control system that is used by the mission control system to adapt the blasting parameters in order to attain the desired quality levels while maximizing the surface area the robot strips per unit time.