Timber represents a building material that aligns with the environmental demands on the impact of the construction sector on climate change. The most common engineering solution for modern timber buildings with large spans is glued laminate timber (glulam). This project proposes a tool for a topological optimized geometry generator of structural elements made of glulam that can be used for building a database of topologically optimized glulam beams. In turn, this can be further used to train machine learning models that can embed the topologically optimized geometry and structural behavior information. Topological optimization tasks usually require a large number of iterations in order to reach the design goals. Therefore, embedding this information into machine learning models for structural elements belonging to the same topological groups will result in a faster design process since certain aspects regarding structural behavior such as strength and stiffness can be quickly estimated using Artificial Intelligence techniques. Topologically optimized geometry propositions could be obtained by employing generative machine learning model techniques which can propose geometries that are closer to the topologically optimized results using FEM and as such present a starting point for the design analysis in a reduced amount of time.
1 December 2013 in Mathematical Modelling in Civil Engineering
The article presents a case study on soil-structure interaction modelling for Wind turbines. After a brief presentation on the history of wind turbines and their potential in Romania, the authors take on the task of modelling the soil-structure interaction for the raft and piles. Three models are chosen: in the first model the piles are fixed at foundation depth; in the second, elastic supports are modelled on the raft and the piles and in the third model both elastic supports and fixed supports are modelled. Several comparisons are made between the three cases referring to displacements, efforts and necessary reinforcement. Based on these comparisons, the most important conclusion drawn is that the modelling of the soil-structure interaction has an important effect on the final reinforcement of the raft and the piles, considering that the difference between the models reaches almost 18%, which in the case of really large foundations can draw the line between economic and non-economic design.
1 September 2026 in Modelling in Civil Environmental Engineering
Structural engineering design in Romania relies on location-dependent environmental parameters and zonation maps for snow, wind, seismicity, and frost depth. Manual reading of zonation maps is time-consuming, error-prone near zone boundaries, and difficult to reproduce at scale. This paper presents a GIS-assisted Python toolchain that retrieves site parameters directly from georeferenced national layers and unified composite KML overlays, computes snow and wind actions for multiple roof typologies according to CR 1-1-3/2012 and CR 1-1-4/2012 and supplies seismic parameters (peak ground acceleration - ag and response spectra control period - T C ) per P100-1/2013 and frost depth per STAS 6054/77. The workflow integrates updated baseline maps from the CCERS collection, population density and tree cover density for the classification of the snow exposure and terrain conditions, while the frost-depth map is reconstructed in QGIS according to STAS. A second version of each map was created based on the MDLPA official seismic map creation approach for uniform administrative reporting. Two composite overlap maps were also produced to visually validate multi-factor assignments and support transparent, repeatable site characterization. Case studies across Romania demonstrate consistent parameter retrieval for both point coordinates and administrative level aggregation, enabling fast reporting and automated batch evaluations suitable for design offices and research pipelines.
1 July 2020 in Romanian Journal of Transport Infrastructure
The purpose of the current paper is to raise awareness on the behaviour of rectangular reinforced concrete columns with disproportionate cross-section dimensions subjected to compression and biaxial bending, considering the fact that in the current structural design process, the design of columns is usually done with respect to each of the two principal directions without considering their combined effect. The paper is based on a case study regarding a building that is currently in the design phase, in which to obtain a correct seismic behaviour, rectangular columns with disproportionate cross-section dimensions were used. The design of both the building and the columns follows the Romanian seismic design codes (“P100-1/2013 - Seismic design code - Part 1 - Design provisions for buildings” and “SR-EN 1998/2004 - Design of structures for earthquake resistance”). Results were compared and conclusions were drawn based on the interaction curves and interaction surfaces computed with expressions from specialized literature and sectional analysis software.
To increase the adoption of recycled plastics in the construction industry and to make this material economically viable, it is of outmost importance to develop technological processes that can make contaminated or dirty plastics useful. This study applies an Euler-Lagrange numerical approach to evaluate the suitability of injection moulds for optimized structural elements made from contaminated recycled polyethylene and to check if the mould shapes are compatible with a normal injection technological process. The viscosity of the material is strongly related to the injection temperature, and as such, a temperature dependent formulation was considered in the numerical model. Furthermore, by simulating the injection moulding process with varying levels of contamination and temperature gradients, researchers can eventually establish a database of material properties and predict the structural performance of the final products using machine-learning methods. This data-driven approach is crucial for establishing quality control measures and building confidence in the use of recycled polyethylene for load-bearing applications. This type of modelling will enable designers to account for structural defects in the material due to the injection process and the nature of the contaminates present in the recycled polyethylene. Also, modelling the process in this manner may allow for developing new topological optimization rules and objective functions aimed at enhancing the performance of recycled polyethylene components, ultimately driving more sustainable practices in the construction industry.
1 July 2020 in Romanian Journal of Transport Infrastructure
The current paper studies the effect of superior eigen-modes on the seismic response for a series of reinforced concrete structures having eigen-periods near code control periods. Although the structural design is based on Romanian seismic design codes (“P100-1/2013 - Seismic design code - Part 1 - Design provisions for buildings” and “SR-EN 1998/2004 - Design of structures for earthquake resistance”), it carries some importance for other countries with similar seismic design spectra. A total of twenty-four models for structures were considered by varying their location (through control period values), three-dimensional regularity, overall dimensions and height regime. Results were compared and conclusions were drawn based on percentage values of relative displacements (storey drifts) and base shear forces.