The launch of both battery electric vehicles (BEVs) and autonomous vehicles (AVs) on the global market has triggered ongoing radical changes in the automotive sector. On the one hand, the new characteristics of the BEV powertrain compared to the combustion type have resulted in new central parameters, such as vehicle range, which then become an important selling point. On the other hand, electric components are as yet not optimized and the sensors needed for autonomous driving are still expensive, which introduces changes to the vehicle cost structure. This transformation is not limited to the vehicle itself but also extends to its mobility and the necessary infrastructure. The former is shaped by new user behaviors and scenarios. The latter is impacted by the BEV powertrain, which requires a charging and energy supply infrastructure. To enable manufacturers and researchers to develop and optimize BEVs and AVs, it is necessary to first identify the relevant parameters and costs. To this end, we have conducted an extensive literature review. The result is a complete overview of the relevant parameters and costs, divided into the categories of vehicle, infrastructure, mobility, and energy.

Automation and electrification are changing vehicles and mobility. Whereas electrification is mainly changing the powertrain, automation enables the rethinking of the vehicle and its applications. The actual driving range is an important requirement for the design of automated and electric vehicles, especially if they are part of a fleet. To size the battery accordingly, not only the consumption of the powertrain has to be estimated, but also that of the auxiliary users. Heating Ventilation and Air Conditioning (HVAC) is one of the biggest auxiliary consumers. Thus, a variable HVAC model for vehicles with electric powertrain was developed to estimate the consumption depending on vehicle size and weather scenario. After integrating the model into a tool for autonomous and electric vehicle concept development, various vehicle concepts were simulated in different weather scenarios and driving cycles with the HVAC consumption considered for battery sizing. The results indicate that the battery must be resized significantly depending on the weather scenario to achieve the same driving ranges. Furthermore, the percentage of HVAC consumption is in some cases higher than that of the powertrain for urban driving cycles, due to lower average speeds. Thus, the HVAC and its energy demand should especially be considered in the development of autonomous and electric vehicles that are primarily used in cities.

Although battery electric vehicles (BEVs) are locally emission-free and assist automakers in reducing their carbon footprint, two major disadvantages are their shorter range and higher production costs compared to combustion engines. These drawbacks are primarily due to the battery, which is generally the heaviest and most expensive component of a BEV. Lightweight measures (strategies to decrease vehicle mass, e.g., by changing materials or downsizing components) lower energy consumption and reduce the amount of battery energy required (and in turn battery costs). Careful selection of lightweight measures can result in their costs being balanced out by a commensurate reduction in battery costs. This leads to a higher efficiency vehicle, but without affecting its production and development costs. In this paper, we estimate the lightweight potential of BEVs, i.e., the cost limit below which a lightweight measure is fully compensated by the cost savings it generates. We implement a parametric energy consumption and mass model and apply it to a set of BEVs. Subsequently, we apply the model to quantify the lightweight potential range (in €/kg) of BEVs. The findings of this paper can be used as a reference for the development of cheaper, lighter, and more energy-efficient BEVs.

Defining a vehicle concept during the early development phase is a challenging task, since only a limited number of design parameters are known. For battery electric vehicles (BEVs), vehicle weight is a design parameter, which needs to be estimated by using an iterative approach, thus causing weight fluctuations during the early development phase. These weight fluctuations, in turn, require other vehicle components to be redesigned and can lead to a change in their size (secondary volume change) and weight (secondary weight change). Furthermore, a change in component size can impact the available installation space and can lead to collision between components. In this paper, we focus on a component that has a high influence on the available installation space: the wheels. We model the essential components of the wheels and further quantify their secondary volume and weight changes caused by a vehicle weight fluctuation. Subsequently, we model the influence of the secondary volume changes on the available installation space at the front axle. The hereby presented approach enables an estimation of the impact of weight fluctuations on the wheels and on the available installation space, which enables a reduction in time-consuming iterations during the development process.

Autonomous driving leads to a change in mobility as we know it today. New possibilities of use cases and technological innovations are changing the vehicle concept. Besides improving safety and traffic flow, automation also leads to greater design freedom and higher energy requirements. Furthermore, the customer and user will often no longer be identical. This leads to changed properties that are needed as input for concept development. In this paper, we are performing an initial analysis of the ratio of increasing auxiliary energy consumers in comparison to total energy consumption in order to point out possible changes in the autonomous vehicle concept and package. In addition, we investigate the influence of different driving cycles on the distribution of energy demand to demonstrate that the application of an autonomous vehicle has a significant influence on the concept design. Last, we present our methodology for the analysis of adaptations and potentials in the vehicle concept of autonomous vehicles.

Battery electric vehicles (BEVs) are becoming more and more important for customers and manufacturers because they are locally emission-free and help companies to comply with increasingly strict regulations. However, electrification leads to a change in the vehicle as we know it from the last decades. The small machine and the big and heavy energy storage challenge manufacturers in developing cars with similar properties like internal combustion vehicles. Therefore, engineers use virtual tools to find optimal solutions in terms of package, performance, and efficiency in the very early stage of the development process. One of those tools is the longitudinal dynamic simulation that is used for sizing the battery and powertrain. In this paper, the authors present a longitudinal dynamic simulation with a low computing time, which helps the user to estimate acceleration, maximum speed, and energy consumption of a full-electric vehicle. The efficiency diagrams for the electric machines are computed by an electric machine design tool instead of scaling one diagram. Both the longitudinal simulation and the efficiency diagrams tools will be provided open source to make it usable for the scientific community and improve it over time.