Aflah Alamsah Dani

Mr. Aflah Alamsah Dani

University of Auckland, Auckland, New Zealand

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2022 in Buildings
Verified
Journal Article
Open access
PDF file
ADAflah Alamsah Dani
Aflah Alamsah Dani
Krishanu RoyKrishanu Roy
Krishanu Roy
RMRehan Masood
Rehan Masood
Zhiyuan FangZhiyuan Fang
Zhiyuan Fang
James B.P. LimJames B.P. Lim
James B.P. Lim
In New Zealand, housing is typically low density, with light timber framing being the dominant form of construction with more than 90% of the market. From 2020, as a result of the global pandemic, there was a shortage of timber in New Zealand, resulting in increased popularity for light steel framing, the main alternative to timber for housing. At the same time, the New Zealand government is committed to sustainability practises through legislation and frameworks, such as the reduction of whole-of-life carbon emissions for the building industry. New Zealand recently announced reducing its net greenhouse gas emissions by 50% within 2030. Life cycle assessment (LCA) is a technique for assessing the environmental aspects associated with a product over its life cycle. Despite the popularity of LCA in the construction industry of New Zealand, prior research results seem varied. There is no unified NZ context database to perform an LCA for buildings. Therefore, in this paper, a comprehensive study using LCA was conducted to quantify and compare the quantity of carbon emissions from two commonly designed houses in the Auckland region, one built from light timber and the other from light steel, both designed for a lifespan of 90 years. The cradle-to-cradle system boundary was used for the LCA. From the results of this study, it was found that the light steel house had 12.3% more carbon in total (including embodied and operational carbons) when compared to the light timber house, of which the manufacturing of two houses had a difference of 50.4% in terms of carbon emissions. However, when the end-of-life (EOL) analysis was included, it was found that the extra carbon could be offset due to the steel’s recyclability, reducing the amount of embodied carbon in the manufacturing process. Therefore, there was no significant difference in carbon emissions between the light steel and the light timber building, with the difference being only 12.3%.

10 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Krishanu RoyKrishanu Roy
Krishanu Roy
ADAflah Alamsah Dani
Aflah Alamsah Dani
HIHartej Ichhpuni
Hartej Ichhpuni
Zhiyuan FangZhiyuan Fang
Zhiyuan Fang
James B.P. LimJames B.P. Lim
James B.P. Lim
In New Zealand (NZ), steel roofing is the most common roofing type for residential buildings. However, the environmental impact of steel roofs are not negligible. Steel roofs account for up to 30% of the upfront embodied carbon for a typical NZ house, highlighting the importance of investigating and reducing the environmental impacts of steel roofs in meeting the net-zero carbon goal of the NZ government. There are several research gaps in investigating the impacts of steel roofs, such as the variation in emissions between local and imported steel coil products, the unavailability of life cycle assessment (LCA) data, and additional impacts from ancillary items. Therefore, this study performed an LCA of a case study roof in NZ to investigate these gaps using GaBi Ts software. It was found that the overall impacts from the steel roofs, including the ancillary items, were 12 kg CO2-eq/m2, where the ancillary items accounted for less than 10% of total emissions. The prepainted steel coils manufactured globally had less than 70% emissions when compared to the emissions of locally manufactured prepainted steel coils. In addition, the roll forming processes had an insignificant effect on overall emissions, whereas the transportation of steel coils had a notable impact.

2 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Krishanu RoyKrishanu Roy
Krishanu Roy
RSRan Su
Ran Su
ADAflah Alamsah Dani
Aflah Alamsah Dani
Zhiyuan FangZhiyuan Fang
Zhiyuan Fang
HLHao Liang
Hao Liang
James B.P. LimJames B.P. Lim
James B.P. Lim
The traditional linear economy (LE) approach based on a “take-make-dispose” plan that has been used in building activities over a long period has a significant impact on the environment. In the LE approach, the used materials are usually sent to landfills rather than recycled, resulting in resource depletion and excessive carbon emissions. A circular economy (CE) is expected to solve these environmental problems by promoting material “closed-loop systems”. This study was intended to quantify and analyse the global warming potential (GWP) values of specific metal roofing and cladding products to promote CE thinking. A spatiotemporal model integrated with the life cycle assessment (LCA) tool was used to quantify the GWP value of the steel products in the investigated buildings. The study analysed ten case buildings located in six different cities in New Zealand: Auckland, Wellington, Hamilton, Palmerston North, Tauranga, and Christchurch. The production stages (A1–A3), water processing (C3), disposal (C4), and recycle, reuse, and recovery stages (D) were the focus of the study in analysing the GWP values of the product’s life cycle. The study found that the production stages became the most significant emitters (approximately 99.67%) of the investigated steel products’ GWP values compared to other selected life cycle stages. However, when considering the recycling stages of the steel products, the GWP value was reduced up to 32%. Therefore, by implementing the recycling process, the amount of GWP can be reduced, consequently limiting the building activities’ environmental impacts. In addition, the integration of spatial analysis and LCA was found to have potential use and benefit in future urban mining and the development of the CE approach in the construction industry.