The electrochemical performance of the Ni-containing cermet anodes, widely used for all types of SOFCs, is essentially governed by the triple phase boundary (TPB) formed by metal, solid electrolyte and gaseous phase. Although the TPB length and electrode surface area may be drastically increased using nanostructured components, information on the resultant effects in terms of the cermet properties and SOFC production technology is still scarce. The present work is centered on the appraisal of NiO morphologies and optimization of pre-treatment conditions for the powders used for anode screen-printing, with commercial nanocrystalline nickel (II) oxide as a model starting material. A series of NiO powders were prepared via annealing at various temperatures (300 – 1100oC) followed by chemical, structural and morphological characterization. The results of X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM/ TEM), thermogravimentry and Raman spectroscopy reveal core-shell structure of nanosized NiO grains, formed due to surface hydration and oxidation under ambient conditions. Thermally induced desorption, and likely oxidation of organic components of the screen-printing pastes by the hyperstoichiometric oxygen, lead to poor quality of the electrode layers, thus making it necessary to introduce an additional powder pre-annealing step. The optimum pre-treatment temperature enabling to remove the absorbates, simultaneously preserving submicron grain size in the electrodes, corresponds to approximately 700oC.
30 July 2016 in Russian Journal of Electrochemistry
The present work is centered on the developments of a new technique for in-situ Raman spectroscopy studies of local chemical and electrochemical reactions, phase transitions, strains and morphological alterations in the SOFC electrodes under working conditions, combined with electrochemical measurements. An appropriate selection of the electrodes geometry makes it possible to directly collect Raman spectra from the triple-phase boundary zone by passing the beam through transparent single-crystal solid electrolyte onto the interface, varying current density, temperature and atmosphere over the working electrode. The results of case studies, focused on reduction of Ni-containing cermet anodes, are presented.