The environmental effects of ship propellers were not even close to fully examined before the current massive ships were introduced to sea trade. Larger ships, result in greater length, beam, draft and propulsion power. Of concern here is the under-keel clearance (UKC) and applied power, the most important parameters causing sea bottom sediment resuspension and, consequently, the transport and deposition of washed sediments. The problems are multifarious: shorelines could be contaminated with heavy metals, petroleum hydrocarbons and other organic chemicals, which are sometimes buried deep in the sediment bed. The effects of resuspension on marine life have been well documented by marine biologists. Further, a ship passing through a flow field may have a significant hydrodynamic effect on the shipping channel: waves generated by moving vessels can accelerate shoreline erosion; erosion around quay piles have a negative impact on sea flora. Waves can also affect other manoeuvring vessels or ships at berth. Available empirical models are applicable for a steady state condition, addressing velocity and, consequently, shears at the sea bottom for defined UKC and states of applied power. The idea here is to calculate material resuspension dynamically in the water column based on realistic manoeuvring conditions, which can be a matter of some complexity. During a manoeuvre, the pilot must bring the ship into or out of the harbour in the safest possible way, operating the telegraph, rudder, thrusters and possibly tugs, and also co-ordinating the work of the linesmen. The jet speed powering the vessel is not only a function of the speed of the propeller, but also of the present speed of the ship, which has an effect on the propeller’s constantly changing torque. Additionally, the bathymetry is constantly changing, and the streamlines hit not only the seabed, but also the bank and other structures of the harbour basin. The resuspended material remains in the column long after the ship has finished manoeuvring, moving slowly through the entire water column and being transported not only by the remaining streamlines of the ship but also by general currents. Realistic manoeuvring parameters can be obtained from real-time simulations with a real crew using state-of-the-art Full Mission Bridge Simulators (FMBS); eddies and the like contribute to the distribution and material resuspension and can be calculated by applying numerical modelling. In this paper, a container ship departure manoeuvre is simulated dynamically using Wartsila FMBS obtained data, which are postprocessed and coupled with the MIKE 3 FM hydrodynamic modelling application to which we add the precise port of Koper bathymetry to gain ship propeller spatial jet velocity distribution in specific time domains. Obtained jet velocity distribution is further coupled with the MIKE 3 MT particle tracking application to visualize total resuspended sediment transport patterns, etc. Container ships were selected to amplify the urgency of this phenomenon; they are the most intrusive in terms of resuspending and scouring the seabed given their powerful engines and larger propellers. Passenger ships could have been used, car carriers, or even tankers; but the fear among scientists is that the issue will not be taken seriously enough by certain stakeholders.

This paper deals with the hydrodynamic effect of the ship on a flexible dolphin during a mooring manoeuvre. The hydrodynamic effect refers to the change in momentum of the surrounding fluid, which is defined by the concept of added mass. The main reason for the present study is to answer the question, “What is the effect of the added mass compared to the mass of the ship during the mooring procedure for a particular type of ship?” Measured angular frequencies of dolphin oscillations showed that the mathematical model can be approximated by the zero frequency limit. This simplifies the problem to some extent. The mooring is a pure rocking motion, and the 3D study is approximated by the strip theory approach. Moreover, the calculations were performed with conformal mapping using conformal Lewis mapping for the hull geometry. The fluid flow is assumed to be non-viscous, non-rotating and incompressible. The results showed that the additional mass effect must be taken into account when calculating the flexible dolphin loads.

Purpose – The purpose of this paper is to describe the micro fluid flow analysis in a micro thruster of micro-/nano- satellite propulsion system and to propose the algorithm for the fluid flow simulations with the open boundary based on moving boundary method. Design/methodology/approach – The analysis is based on a finite volume moving boundary method. Underlying mathematical model is the system of Navier-Stokes-Fourier partial differential equation describing compressible gas model. Propellant under the study is pure nitrogen gas. First, the static geometry velocity vector field is calculated and the information of the velocity at the outflow boundary is obtained; then, with the moving boundary method the outlet boundary is evolved. Evolution of the boundary is stopped when the continuum model ceases to hold. The criteria of the continuum model failure are based on the local Knudsen number. Findings – The validations of the flow with respect to the Knudsen number showed that the continuum model is valid in the nozzle interior part (from the pressure value to the nozzle throat). The exterior nozzle part (diverging side) showed immediate raising of the Knudsen number above the continuum threshold (0.01). For the overall accurate computations of thruster flow, the continuum model must be coupled with molecular model (i.e. Boltzmann BGK). Originality/value – In this paper, the authors propose a method for the computation of an open boundary flow with the application of the moving boundary method.