Reinforced concrete shear walls are one of the most widely used lateral load structural resisting elements in high rise buildings. Introducing openings in existing shear walls may be due to remodeling or municipality considerations, such as placement of staircases, windows, doors and elevators. Making openings in existing shear wall decrease the overall structural capacity and integrity of the wall, in addition to stress concentrations around the openings. This necessitates the strengthening of the opening rim with FRP wraps. This paper focuses on developing a 3D high-reliability dynamic nonlinear finite element model on ABAQUS theory manual and users’ manual, version 6.10 ( 2010 ) to simulate the behavior of shear walls with openings strengthened with FRP wraps to investigate their seismic response under the monotonic loads. The proposed FE model has been validated using previous experimental data in literature. The FE results indicated that the proposed configuration of CFRP laminates substantially increases the lateral load strength and deformation capacity of the shear wall with openings and also improves the ductility and energy dissipation of the shear wall.

The use of sustainable technologies such as supplementary cementitious materials, and/or recycled post-consumer environmental wastes is widely used in concrete industry in the last decade. This paper presents the results of a laboratory investigation of normal concrete containing sustainable technologies. Twenty one mixtures (21) were prepared with different combinations of silica fume, fly ash, olive’s seed ash, and corncob ash (CCA). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Based on the results obtained in this study and the analyses conducted, the following observations were drawn: replacing the cement by olive’s seed ash or CCA has a significant effect on fresh concrete workability. Olive’s seed ash increased the slump by more than 200 % compared to the control mixtures. The compressive strength of mixtures containing olive’s seed ash showed by 45 and 75 % decrease compared to the control mixtures. The 28 days compressive strength of mixtures produced by CCA of 10 % replacement decreased by 41 % compared to the control mixture.

The use of Ultra-High Performance Fiber Reinforced Concrete (UHPFRC) increased in the field of civil engineering throughout the last few decades. UHPFRC is being used considerably on a large scale in megastructure applications. High compressive and tensile strength permits reconstruction and optimization of the structural members. At the same time, its improved durability properties make it easier to extend the life of the design and can be used as thin layers, cladding, repairs, and column coverings. Although UHPC has an extremely high compressive strength, it exhibits very brittle fracture behavior compared to normal strength concrete (NSC). Since the ductility and fracture toughness of UHPC can be enhanced by adding fibers, the addition of fibers to production adds innovative features to UHPFRC structures and opens up new application areas for UHPFRC. The aim of this study is to investigate the axial behavior of square reinforced concrete (RC) columns strengthened with UHPFRC jackets. Nineteen specimens were cast (1000 mm in height and a cross-sectional area of 150 × 150 mm, whose interface treatment methods were prepared through vertical grooving (VG), horizontal grooving (HG), and without grooving (NG), with the jacket thickness (20 mm and 40 mm) and the number of strengthened sides of the column (two, three, and four sides). The results show a brittle failure for all strengthened specimens. The UHPFRC-reinforced RC columns with vertical grooving (VG) showed a higher ultimate load capacity compared to the columns with horizontal grooving (HG) and the columns without grooving (NG). The horizontal grooving (HG) gives a better result than the jacket without grooving (NG) and increases the cohesion area between the jacket and the column for two and three of the RC columns’ strengthened sides. But, in the case of strengthening the columns on four sides, the effect of confining the jacket to the column appears, and the grooving causes weakness in the body of the original column so that the jacket without grooving (NG) gives a better result than the jacket with horizontal grooving (HG).

Due to the depletion of natural aggregates and raw materials for contemporary construction, the construction and demolition waste existing in old concrete structures is an imperative problem. Cutting down on exploiting natural aggregates and reusing construction and demolition waste in the concrete industry are solutions to this problem. This paper investigated the replacement of natural coarse aggregate (NCA) with recycled concrete aggregates (RCA) with different ratios (0%, 50%, 75%, and 100%) in producing self-compacting concrete (SCC). Different components of supplementary cementitious materials (SCMs), such as nano-silica (NS), fly ash (FA), and metakaolin (MK), as well as PVA fibers, were incorporated into the SCC mixtures. The fresh properties (slump flow, V-funnel, and L-box test) and hardened properties (compressive strength, splitting tensile strength, and flexural strength), as well as the flexural behavior of SCC beams (load-carrying capacity, crack pattern, mid-span deflection, and flexural stiffness), were studied for all SCC mixes. The results of fresh and hardened concrete confirmed that it is possible to produce SCC with a 100% replacement of RCA with minimal effects on the concrete properties. The mixture of SCC with 100% RCA replacement, 20% MK, and 22% FA was the optimum mixture with acceptable fresh properties that complied with the EFNARC specifications. For 100% RCA replacement, the compressive strength was reduced by 8.20%, and the ultimate load and flexural stiffness increased by 3.20 and 16.25%, respectively, compared with the control mixture.

Openings in slabs are usually required for many different applications such as aeriation ducts and air conditioning. Opening in concrete slabs due to cutouts significantly decrease the member stiffness. There are different techniques to strengthen slabs with opening cutouts. This study presents experimental and numerical investigations on the use of Carbon Fiber Reinforced Polymers (CFRP) as strengthening material to strengthen and restore the load carrying capacity of R.C. slabs after having cutout in the hogging moment region. The experimental program consisted of testing five (oneway spanning R.C. flat slabs) with overhang. All slabs were prismatic, rectangular in cross-section and nominally 2000 mm long, 1000 mm width, and 100 mm thickness with a clear span (distance between supports) of 1200 mm and the overhang length is 700 mm. All slabs were loaded up to 30 kN (45% of ultimate load for reference slab, before yielding of the longitudinal reinforcement), then the load was kept constant during cutting concrete and steel bars (producing cut out). After that operation, slabs were loaded till failure. An analytical study using finite element analysis (FEA) is performed using the commercial software ANSYS. The FEA has been validated and calibrated using the experimental results. The FE model was found to be in a good agreement with the experimental results. The investigated key parameters were slab aspect ratio for the opening ratios of [1:1, 2:1], CFRP layers and the laminates widths, positions for cutouts and the CFRP configurations around cutouts.