Adam Hutyra

Mr. Adam Hutyra

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 April 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MRMagdalena Rudziewicz
Magdalena Rudziewicz
AHAdam Hutyra
Adam Hutyra
MMMarcin Maroszek
Marcin Maroszek
Kinga KorniejenkoKinga Korniejenko
Kinga Korniejenko
MHMarek Hebda
Marek Hebda
This study investigates the influence of various reinforcing fibers, including coconut, basalt, glass, merino wool, and polypropylene, on the properties and processability of cementitious mixtures, with a particular emphasis on their application in 3D printing. The incorporation of fibers at a concentration of 1 wt.% was found to significantly hinder the printing process. Specifically, certain fibers, such as polypropylene, rendered extrusion impractical due to nozzle clogging. However, reducing the fiber content to 0.5 wt.% improved material flowability and minimized structural defects during printing. Fiber selection, in addition to its impact on mechanical properties, plays a crucial role in determining overall process efficiency. Mixtures incorporating coal slag as a dense filler, combined with stiff fibers such as basalt or glass, exhibited the highest flexural strength. Moreover, the inclusion of merino wool fibers enhanced the flexural performance of fly ash-based mixtures, achieving strength levels comparable to or exceeding those of stiffer fibers. These findings contribute to the advancement of sustainable construction practices. Notably, samples produced via 3D printing consistently demonstrated higher flexural strength than those fabricated using traditional molding techniques. This enhancement is attributed to microstructural modifications induced by the layer-by-layer deposition process. Depending on the sample composition and the type of reinforcing fiber, water absorption behavior varied significantly. Merino wool and coconut fibers exhibited the highest water absorption due to their hydrophilic nature and capillary action, particularly in 3D-printed samples with open-pore structures. In contrast, glass and basalt fibers, characterized by their higher density and hydrophobicity, exhibited lower water absorption levels. These results underscore the importance of optimizing fiber type, concentration, and processing methodologies to achieve tailored performance in fiber-reinforced cementitious mixtures. Such optimizations align with the principles of sustainable development and hold significant potential for advancing 3D-printed construction applications

19 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MMMarcin Maroszek
Marcin Maroszek
MRMagdalena Rudziewicz
Magdalena Rudziewicz
AHAdam Hutyra
Adam Hutyra
PDPaweł Dziura
Paweł Dziura
MHMarek Hebda
Marek Hebda
In recent years, three-dimensional concrete printing (3DCP) has garnered significant attention within the scientific community. The ongoing development and widespread adoption of this technology in the near future will be nearly inevitable. However, to ensure the safe and effective use of 3DCP in building construction, standardization of its processes is essential. A critical component of this standardization involves guaranteeing the repeatability of element production, regardless of variations in shape or material composition. Therefore, the present study focuses on analyzing factors that influence extrusion efficiency, incorporating measurements of material dispensing rates relative to input parameters. Based on the results, it was found that reducing the printer nozzle size from 20 mm to 12 mm significantly decreases the extrusion efficiency, resulting in a 15% reduction. The addition of polypropylene fibers to the concrete mixture has an even greater impact, reducing extrusion efficiency by up to 28%. On the other hand, changing the mixture’s flow from 150 mm to 130 mm had relatively minor effect, decreasing process efficiency by only 4.5%. To achieve consistent repeatability in the 3DCP process, introducing corrective factors adjusted for variations in input parameters appears to be a necessary step. The development and implementation of such adjustments will be a critical aspect of future research efforts aimed at optimizing 3D concrete printing technology.

3 February 2025 in Processes
Verified
Journal Article
Open access
PDF file
MRMagdalena Rudziewicz
Magdalena Rudziewicz
MMMarcin Maroszek
Marcin Maroszek
AHAdam Hutyra
Adam Hutyra
MGMichał Góra
Michał Góra
KRKarina Rusin-Żurek
Karina Rusin-Żurek
MHMarek Hebda
Marek Hebda
This study examines the pore structure and distribution in 3D printed and cast foamed concrete using protein-based and synthetic foaming agents alongside various stabilizing additives. In 3D printed samples, pores are irregular and flattened due to mechanical forces during printing, whereas cast samples display uniform, spherical pores from homogeneous foam distribution. Samples containing the CA stabilizer show higher apparent densities (up to 2.05 g/cm3 for printed samples), correlating with lower water absorption. Protein-based foaming agents (PS) produce smaller, more evenly distributed pores, while synthetic agents (AS) result in larger, less uniform pores. Stabilizers significantly influence pore characteristics: commercial stabilizers yield smaller, more uniform pores, while recycled industrial oil (UO) leads to larger, more variable pores. Protein-based agents improve structural stability and reduce water absorption through uniform pore distributions, while synthetic agents lower density and increase water absorption. The highest sorption values were observed in samples with AS without stabilizer (1.7 kg/m2h1/2) and AS and UO (1.6 kg/m2h1/2) in a vertical orientation, with the horizontal orientation of sample AS and UO achieving a peak value of 2.0 kg/m2h1/2. Moreover, stabilization using UO resulted in higher sorption coefficients than stabilization with CA. High porosity in M1 resulted in low strength (0.2 MPa bending, 0.1 MPa perpendicular compression), while M5 showed superior performance (11.5 MPa perpendicular compression). PS-foamed samples (M4, M6) with uniform pores had the highest strengths, with M6 achieving 3.8 MPa bending and 10.3 MPa perpendicular compression. Perpendicular compression (M5: 11.5 MPa) was up to three times stronger than parallel compression due to weak interlayer bonds in 3D printing.

2 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
AHAdam Hutyra
Adam Hutyra
MBMagdalena Bańkosz
Magdalena Bańkosz
Bozena TyliszczakBozena Tyliszczak
Bozena Tyliszczak
Three-dimensional printing technology in construction is a rapidly growing field that offers innovative opportunities for design and construction execution. A key component of this process is the automated production of high-performance construction mixtures that meet specific requirements for strength, fluidity, and setting speed. This overview article outlines the history and development of 3D printing technology in the construction industry, describes various printing technologies, and discusses the properties and requirements for construction mixes. Special attention is given to automated systems for batching and mixing ingredients, which increase the precision and efficiency of production. The different types of construction mixes used in 3D printing and the main technical and operational challenges associated with their application are also presented. The article’s conclusions highlight the potential of this technology to revolutionize the construction industry by improving efficiency and reducing costs and project lead times.

31 January 2026 in Materials
Verified
Journal Article
Open access
PDF file
AHAdam Hutyra
Adam Hutyra
MMMarcin Maroszek
Marcin Maroszek
MRMagdalena Rudziewicz
Magdalena Rudziewicz
MGMichał Góra
Michał Góra
Bozena TyliszczakBozena Tyliszczak
Bozena Tyliszczak
Concrete 3D printing (3DCP) combines materials science with material processing technologies to enable automated, additive construction. This review summarizes findings from the literature and industrial practice on 3DCP mortar formulation with emphasis on the material processing chain. The workflow is examined from raw material storage through handling, mixing, and deposition. The roles of binders, aggregates, dispersed reinforcement, and chemical admixtures are discussed in relation to rheological behavior, buildability, and early-age mechanical performance. The analysis covers storage, dosing, and mixing strategies with respect to mix consistency and overall process reliability, while mortar pumping and extrusion are addressed alongside nozzle-injected additives and automation. Finally, limitations and scalability challenges are outlined with research directions such as continuous mixing, in-line monitoring, and adaptive mix formulation for on-site applications.