Braids are generally divided into 2D braids and 3D braids. Two-dimensional braids include flat braids and circular braids. Circular braids represent three-dimensional textiles, as they enclose a volume, but consist of a two-dimensional yarn architecture. Three-dimensional braids are defined by a three-dimensional yarn architecture. Historically, 3D braids were produced on row and column braiding machines with Cartesian or radial machine beds, by bobbin movements around inlay yarns. Three-dimensional rotary braiding machines allow a more flexible braiding process, as the bobbins are moved via individually controlled horn gears and switches. Both braiding machines at the Institut für Textiltechnik (ITA) of RWTH Aachen University, Germany, are based on the principal of 3D rotary machines. The fully digitized 3D braiding machine with an Industry 4.0 standard enables the near-net-shape production of three-dimensionally braided textile preforms for lightweight applications. The preforms can be specifically reinforced in all three spatial directions according to the application. Complex 3D structures can be produced in just one process step due to the high degree of design freedom. The 3D hexagonal braiding technology is used in the field of medical textiles. The special shape of the horn gears and their hexagonal arrangement provides the densest packing of the bobbins on the machine bed. In addition, the lace braiding mechanism allows two bobbins to occupy the position between two horn gears, maximizing the number of bobbins. One of the main applications is the near-net-shape production of tubular structures, such as complex stent structures. Three-dimensional braiding offers many advantages compared to 2D braiding, e.g., production of complex three-dimensional geometries in one process step, connection of braided layers, production of cross-section changes and ramifications, and local reinforcement of technical textiles without additional process steps. In the following review, the latest developments in 3D braiding, the machine development of 3D braiding machines, as well as software and simulation developments are presented. In addition, various applications in the fields of lightweight construction and medical textiles are introduced.

Tissue Engineering is considered a promising route to address existing deficits of autografts and permanent synthetic prostheses for tendons and ligaments. However, the requirements placed on the scaffold material are manifold and include mechanical, biological and degradation-related aspects. In addition, scalable processes and FDA-approved materials should be applied to ensure the transfer into clinical practice. To accommodate these aspects, this work focuses on the high-scale fabrication of high-strength and highly oriented polycaprolactone (PCL) fibers with adjustable cross-sectional geometry and degradation kinetics applying melt spinning technology. Four different fiber cross-sections were investigated to account for potential functionalization and cell growth guidance. Mechanical properties and crystallinity were studied for a 24-week exposure to phosphate-buffered saline (PBS) at 37 °C. PCL fibers were further processed into scaffolds using multistage circular braiding with three different hierarchical structures. One structure was selected based on its morphology and scaled up in thickness to match the requirements for a human anterior cruciate ligament (ACL) replacement. Applying a broad range of draw ratios (up to DR9.25), high-strength PCL fibers with excellent tensile strength (up to 69 cN/tex) could be readily fabricated. The strength retention after 24 weeks in PBS at 37 °C was 83–93%. The following braiding procedure did not affect the scaffolds’ mechanical properties as long as the number of filaments and the braiding angle remained constant. Up-scaled PCL scaffolds resisted loads of up to 4353.88 ± 37.30 N, whilst matching the stiffness of the human ACL (111–396 N/mm). In conclusion, this work demonstrates the fabrication of highly oriented PCL fibers with excellent mechanical properties. The created fibers represent a promising building block that can be further processed into versatile textile implants for tissue engineering and regenerative medicine.

The anterior cruciate ligament (ACL) is the most commonly injured intra-articular ligament of the knee. Due to its limited intrinsical healing potential and vascularization, injuries of the ACL do not heal satisfactorily, and surgical intervention is usually required. The limitations of existing reconstructive grafts and autologous transplants have prompted interest in tissue-engineered solutions. A tissue engineering scaffold for ACL reconstruction must be able to mimic the mechanical properties of the native ligament, provide sufficient porosity to promote cell growth of the neoligament tissue, and be biodegradable. This study investigates long-term biodegradable poly-ε-caprolactone (PCL)-based scaffolds for ACL replacement using the 3D hexagonal braiding technique. The scaffolds were characterized mechanically as well as morphologically. All scaffolds, regardless of their braid geometry, achieved the maximum tensile load of the native ACL. The diameter of all scaffolds was lower than that of the native ligament, making the scaffolds implantable with established surgical methods. The 3D hexagonal braiding technique offers a high degree of geometrical freedom and, thus, the possibility to develop novel scaffold architectures. Based on the findings of this study, the 3D-braided PCL-based scaffolds studied were found to be a promising construct for tissue engineering of the anterior cruciate ligament.

The rise of wearable technology has gradually shifted modern health monitoring from clinical to personal use. Smart wearables can collect physiological signals and show them directly on a smartphone. In contemporary healthcare scenarios, this big data could aid medical doctors in online health analysis. Most currently available wearables are designed to monitor specific health parameters, while the combination of many devices is practically not convenient and not cost-effective. Therefore, a strong trend is towards the development of multifunctional devices. This demands, however, alternative sources of power other than conventional batteries. The concept of human-body-powered biosensing textiles (HBBTs) addresses this challenge. By harvesting energy produced from the human body such as motion, pressure, vibration, heat, and metabolites and converting them into electricity, HBBTs could potentially work without a battery. Additionally, the textiles themselves provide a suitable substrate for interconnects and biosensors, such that a system based on HBBTs could provide multifunctional health monitoring. This review explains the fundamental theories, the classification, the energy-conversion efficiency assessment, and the possible biomonitoring applications of HBBTs. Furthermore, we discuss the challenges for technology maturity and the perspectives of HBBTs in shaping the future of health monitoring.