The edge, the fog, the cloud, and even the end-user’s devices play a key role in the management of the health sensitive content/data lifecycle. However, the creation and management of solutions including multiple applications executed by multiple users in multiple environments (edge, the fog, and the cloud) to process multiple health repositories that, at the same time, fulfilling non-functional requirements (NFRs) represents a complex challenge for health care organizations. This paper presents the design, development, and implementation of an architectural model to create, on-demand, edge-fog-cloud processing structures to continuously handle big health data and, at the same time, to execute services for fulfilling NFRs. In this model, constructive and modular blocks, implemented as microservices and nanoservices, are recursively interconnected to create edge-fog-cloud processing structures as infrastructure-agnostic services. Continuity schemes create dataflows through the blocks of edge-fog-cloud structures and enforce, in an implicit manner, the fulfillment of NFRs for data arriving and departing to/from each block of each edge-fog-cloud structure. To show the feasibility of this model, a prototype was built using this model, which was evaluated in a case study based on the processing of health data for supporting critical decision-making procedures in remote patient monitoring. This study considered scenarios where end-users and medical staff received insights discovered when processing electrocardiograms (ECGs) produced by sensors in wireless IoT devices as well as where physicians received patient records (spirometry studies, ECGs and tomography images) and warnings raised when online analyzing and identifying anomalies in the analyzed ECG data. A scenario where organizations manage multiple simultaneous each edge-fog-cloud structure for processing of health data and contents delivered to internal and external staff was also studied. The evaluation of these scenarios showed the feasibility of applying this model to the building of solutions interconnecting multiple services/applications managing big health data through different environments.
In this work, a sensor in microstrip technology and a methodology for measuring the real part and the imaginary part of the complex uniaxial permittivity of solid anisotropic samples are presented. The sensor is based on a pair of parallel lines coupled resonators and a cleft arranged in the coupling region which allows to hold the samples under test (SUTs). The proposed methodology relates the change in the even/odd resonance frequency with the real part of the permittivity in the vertical/horizontal direction, and the change in the Q factor of the even/odd mode with the imaginary part of the permittivity in the vertical/horizontal direction. The methodology was successfully verified with the characterization, at 2.43 GHz of anisotropic samples of printed PLA, Diclad 880, and RO4350B using the knowns materials: RT5870, PTFE and RO4003.
In this work, a methodology is presented for the determination of the respiration rate of a person under test (PUT), the detection of movements, as well as the elimination of the spurious effects produced by the movements of the PUT. The methodology is based on Empirical Modal Decomposition (EMD) applied to the phase signal obtained by means of a quadrature Doppler radar operating in S band. The EMD allows to automatically eliminate the continuos component (CC) which is present in the phase signal since one of the main characteristics of the modes generated by the EMD is that its mean is equal to zero. On the other hand, the first mode of the EMD is used for the detection of movements while the sum of the second and third modes are used for the elimination of the CC drift caused by the DC drift and the high frequency components produced by the movements of the PUT. The proposed methodology was successfully tested in a PUT at rest and performing movements of the head, arm and combination of head, arm, and torso. The average respiration rate measured was 20.78 breaths / min with a standard deviation of 2.53 breaths/min.
This paper presents the first microwave-sensor-node integrated into a short-range wireless sensor network based on ZigBee technology. The node includes an analog front-end circuit, a Frequency Modulated Continuous Wave generator, an Analog-to-Digital-Converter module, a transceiver, a power unit, a processing unit and a new one-port dielectric permittivity sensor which is able to measuring the separation of structural cracks by the reflection coefficient measured in microwave frequencies. The analog front-end is composed of a pair of power dividers, an isolator and a mixer. The dielectric permittivity sensor is based on a patch antenna of variable length. The processing unit and transceiver are implemented with an Arduino UNO and an XBee module respectively. Additionally, the methodology for data processing is presented and the results of the measurement of a synthetic crack are presented. The results show that the system was successfully implemented with a sensitivity of 0.07 GHz/mm, for an opening range of between 0 and 5 mm and for a frequency range ranging from 2.782 GHz to 3.131 GHz. It is important to mention that the measurement was done remotely, placing the sensor 3 m from the client PC.
In this work, a WiFi sensor-node is proposed for measuring crack width. The proposed sensor node consists of a quarter-wavelength, a movable patch, a power unit, a reflectometer for measuring the reflection coefficient, a processing unit, and a WiFi transceiver module. The sensor was simulated, measured with a vector network analyzer (VNA), and a wireless sensor network (WSN) based on WiFi technology. The sensor sensitivity is 0.125 GHz/mm in simulation, 0.109 GHz/mm with the VNA, and 0.116 GHz/mm with the WSN. The sensor resolution measured in the experiment with the WSN is 0.1mm. Additionally, the fitting curves representing the data obtained from the sensor have a coefficient of determination of 0.995, 0.997, 0.998 for the simulation, VNA, and WSN respectively. Therefore, the sensor node has an initial resonance frequency of 2.733 GHz, a sensitivity of 0.116 GHz/mm, and a coefficient of determination of 0.998 measured within a measurement range from 0 mm to 5 mm. Thus, the proposed sensor has high sensitivity and linearity, as well as low distortion within the mentioned measurement range.