Alesia Sushkova

Ms. Alesia Sushkova

Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 March 2019 in Environmental Science: Nano
Verified
Journal Article
Closed access
PDF file
JFJoana Figueiredo
Joana Figueiredo
TOTânia Oliveira
Tânia Oliveira
VFVioleta Ferreira
Violeta Ferreira
ASAlesia Sushkova
Alesia Sushkova
SSSara Silva
Sara Silva
Roberto MartinsRoberto Martins
Roberto Martins
Biofouling is one of the most challenging problems for the maritime industry which has been minimized through the application of coatings containing anti-fouling (AF) biocides (e.g. Cu-based compounds; DCOIT) in immersed structures. An innovative eco-friendly approach based on the encapsulation of AF biocides in engineered nanomaterials (e.g. mesoporous silica nanocapsules (SiNCs)) has recently been applied to control the leaching rate and the environmental impacts of AF biocides when used as additives in coatings. Thus, the present study aims to: (a) assess the toxicity towards marine species of three innovative AF nanomaterials: SiNCs loaded with DCOIT (SiNC-DCOIT), SiNCs coated with silver (SiNC-Ag), SiNCs loaded with DCOIT and coated with silver (SiNC-DCOIT-Ag), and free counterparts (DCOIT, ionic silver and empty SiNCs) and (b) test if encapsulation reduces the toxicity of biocides to non-target species maintaining the anti-fouling efficacy against target species. To achieve this goal, eleven marine species (three target and eight non-target) were exposed to the test compounds, following standard protocols, with adaptations for some species. DCOIT and silver were found to be very to extremely toxic to the target and non-target species tested. Encapsulated biocides reduced their toxicity towards non-target species while showing good AF performance towards fouler species. The present study demonstrated that the encapsulation of DCOIT and silver in silica nanocapsules is a promising, efficient and more environmentally-friendly anti-fouling solution compared to free commercial biocides.

17 February 2022 in Environmental Pollution
Verified
Journal Article
Open access
Roberto MartinsRoberto Martins
Roberto Martins
JFJoana Figueiredo
Joana Figueiredo
ASAlesia Sushkova
Alesia Sushkova
MWManon Wilhelm
Manon Wilhelm
João TedimJoão Tedim
João Tedim
SLSusana Loureiro
Susana Loureiro
Corrosion is an environmental and economic global problem. "Smart" or stimuli-responsive colorimetric nanosensors for maritime coatings have been proposed as an asset to overcome the limitations of the current monitoring techniques by changing color in the presence of triggers associated with the early stages of corrosion. Layered double hydroxides (Zn-Al LDH; Mg-Al LDH) and silica mesoporous nanocapsules (SiNC) were used as precursor nanocarriers of active compounds: hexacyanoferrate ions ([Fe(CN)6]3-) and phenolphthalein (PhPh), respectively. Additionally, the safer-by-design principles were employed to optimize the nanosensors in an eco-friendly perspective (e.g., regular vs. warm-washed SiNC-PhPh; immobilization using different carriers: Zn-Al LDH-[Fe(CN)6]3- vs. Mg-Al LDH-[Fe(CN)6]3-). Therefore, the present study aims to assess the environmental behavior in saltwater and the toxic effects of the nanosensors, their nanocarriers, and the active compounds on the marine microalgae Tetraselmis chuii and the crustacean Artemia salina. Briefly, tested compounds exhibited no acute toxic effects towards A. salina (NOEC = 100 mg/L), apart from SiNC-PhPh (LC50 = 2.96 mg/L) while tested active compounds and nanosensors caused significant growth inhibition on T. chuii (lowest IC50 = 0.40 mg/L for SiNC-PhPh). The effects of [Fe(CN)6]3- were similar regardless of the nanocarrier choice. Regarding SiNC-PhPh, its toxicity can be decreased at least twice by simply reinforcing the nanocapsules washing, which contributes to the removal (at least partially) of the surfactants residues. Thus, implementing safe-by-design strategies in the early stages of research proved to be critical, although further progress is still needed towards the development of truly eco-friendly nanosensors.

26 December 2019 in Macromolecular Materials and Engineering
Verified
Journal Article
Closed access
PDF file
Isabel de SousaIsabel de Sousa
Isabel de Sousa
MQMarcela C. Quevedo
Marcela C. Quevedo
ASAlesia Sushkova
Alesia Sushkova
Mario FerreiraMario Ferreira
Mario Ferreira
João TedimJoão Tedim
João Tedim

17 April 2020 in European Journal of Inorganic Chemistry
Verified
Journal Article
Closed access
PDF file
MWManon Wilhelm
Manon Wilhelm
MQMarcela C. Quevedo
Marcela C. Quevedo
ASAlesia Sushkova
Alesia Sushkova
TGTiago L. P. Galvão
Tiago L. P. Galvão
ABAlexandre Bastos
Alexandre Bastos
João TedimJoão Tedim
João Tedim

4 September 2017 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Closed access
PDF file
YMYuri Maksimuk
Yuri Maksimuk
DPDmitry Ponomarev
Dmitry Ponomarev
ASAlesia Sushkova
Alesia Sushkova
VKVladimir Krouk
Vladimir Krouk
IVIvan Vasarenko
Ivan Vasarenko
ZAZoya Antonava
Zoya Antonava

25 April 2023 in Frontiers in Chemical Engineering
Verified
Journal Article
Open access
ASAlesia Sushkova
Alesia Sushkova
RMRodrigo Montes
Rodrigo Montes
TPTiago Paulino
Tiago Paulino
ISIsabel Sousa
Isabel Sousa
CNCristina Neves
Cristina Neves
João TedimJoão Tedim
João Tedim
The detection of corrosion at early stages could increase the service life of metal-based infrastructures in a cost-effective manner. Despite the recent progress in “smart” self-reporting corrosion sensing coatings, the development of environmentally friendly systems appropriate for steel substrate used in offshore applications remains a relevant challenge. In this study, a novel smart corrosion sensing coating, based on hexacyanoferrate intercalated Mg-Al LDH nanoadditive, was developed, aiming at the detection of early-stage corrosion of carbon steel. The detection mechanism is based on the ability of hexacyanoferrate ions to react with iron cations generated during the corrosion process, giving rise to a colorimetric signal, while LDH carriers provide a controlled release of active ions under corrosion conditions. The sensing nanoadditive was embedded into a commercial pigment-free water-based acrylic polyurethane coating. The nanomaterial was characterized structurally (XRD) and morphologically (STEM). The compatibility of the additive with the polymer formulation and its influence on the resulting coating performance was investigated in terms of rheological behavior, structure (FTIR), morphology (SEM/EDS), thermal (TGA, DSC) and mechanical (adhesion, hardness) properties. The corrosion protection ability of the coating was evaluated via EIS, while the sensing functionality was analyzed by visual analysis of the surface. The developed coating successfully detects early-stage corrosion of steel substrate at a lab scale, in conditions relevant to the use of metallic structures in offshore applications, demonstrating a correlation between the level of material degradation and the spectroscopic signal associated with the presence of the LDH functional nanoadditive. Furthermore, the observed decrease in coating barrier properties, caused by the presence of LDH, was overcome by the subsequent development of a multilayer coating system. Two different topcoats (epoxy- and polyurethane-based) were surveyed for this purpose, showing an improvement in the coating barrier properties without influencing the corrosion detection functionality of the sensing layer. The results were successfully validated by standard salt spray tests. The multilayer approach opens up the possibility to model coatings with different characteristics for various operating conditions.