While developing battery cells, the achievement of fast-charging capability is heavily dependent on avoiding metallic plating on the anode surface (i.e., lithium plating in lithium-ion cells). However, this objective hinges on the effectiveness of plating detection. Currently, measurement techniques are either inadequate in providing spatial, temporal, or causal information, incur high costs when employing, e.g., neutron imaging, or are lengthy due to destructive post-mortem examinations that additionally lack operando data. In this work, we demonstrate an ultrasound imaging method for operando visualization of the interior of a multi-layer pouch battery cell. Here we show that this method can non-invasively visualize the formation and stripping of lithium plating during cycling. Extensive reference electrode studies and ex-situ analysis verify the effectiveness of our method for plating detection. Ultimately, this work enables researchers and industry to significantly accelerate the development of new cell technologies and their optimized utilization.
This research paper presents a data-based energy management method for a vessel that predicts the upcoming load demands based on data from weather information and its automated tracking system. The vessel is powered by a hybrid propulsion system consisting of a high-temperature fuel cell system to cover the base load and a battery system to compensate for the fuel cell’s limited dynamic response capability to load fluctuations. The developed energy management method predicts the load demand of the next time steps by analyzing physical relationships utilizing operational and positional data of a real vessel. This allows a steadier operation of the fuel cell and reduces stress factors leading to accelerated aging and increasing the resource efficiency of the propulsion system. Since large ships record tracking data of their cruise and no a priori training is required to adjust the energy management, the proposed method can be implemented with small additional computational effort. The functionality of the energy management method was verified using data from a real ship and records of the water currents in the North Sea. The accuracy of the load prediction is 2.7% and the attenuation of the fuel cell’s power output could be increased by approximately 32%.
Active dissipative balancing systems are essential in battery systems, particularly for compensating the leakage current differences in battery cells. This study focuses on using balancing resistors to stimulate battery cells for impedance measurement. The value of impedance spectroscopy for in-depth battery cell diagnostics, such as temperature or aging, is currently being demonstrated and recognized by vehicle manufacturers, chip producers, and academia. Our research systematically explores the feasibility of using existing balancing resistors in battery management systems and identifies potential limitations. Here we propose a formula to minimize hardware requirements through signal processing techniques. A quadrupling of the sampling rate, number of averaging values, or the size of the fast Fourier transform is equivalent, concerning the signal-to-noise ratio, to increasing the analog resolution by one bit or reducing the input filter bandwidth by a quarter.