Amanendra K. Kushwaha

Mr. Amanendra K. Kushwaha

Department of Mechanical Engineering, University of Nevada Reno, Reno, Nevada, USA
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2021 in Crystals
Verified
Journal Article
Open access
PDF file
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
MJMerbin John
Merbin John
Mano MisraMano Misra
Mano Misra
Pradeep MenezesPradeep Menezes
Pradeep Menezes
Nanostructuring is a commonly employed method of obtaining superior mechanical properties in metals and alloys. Compared to conventional polycrystalline counterparts, nanostructuring can provide remarkable improvements in yield strength, toughness, fatigue life, corrosion resistance, and hardness, which is attributed to the nano grain size. In this review paper, the current state-of-the-art of synthesis methods of nanocrystalline (NC) materials such as rapid solidification, chemical precipitation, chemical vapor deposition, and mechanical alloying, including high-energy ball milling (HEBM) and cryomilling was elucidated. More specifically, the effect of various process parameters on mechanical properties and microstructural features were explained for a broad range of engineering materials. This study also explains the mechanism of grain strengthening using the Hall-Petch relation and illustrates the effects of post-processing on the grain size and subsequently their properties. This review also reports the applications, challenges, and future scope for the NC materials.

19 August 2022
Verified
Book Chapter
Closed access
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
HRHafizur Rahman
Hafizur Rahman
ESEthan Slater
Ethan Slater
RPRadul Patel
Radul Patel
CEChristopher Evangelista
Christopher Evangelista
PMPradeep L. Menezes
Pradeep L. Menezes

6 February 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
RMRaven Maccione
Raven Maccione
MJMerbin John
Merbin John
SLSridhar Lanka
Sridhar Lanka
Mano MisraMano Misra
Mano Misra
Pradeep MenezesPradeep Menezes
Pradeep Menezes
The present investigation aims to develop nanocrystalline (NC) pure aluminum powders using cryomilling technique and manufacture bulk components using spark plasma sintering (SPS). The cryomilling was performed on pure Al powders for 2, 6, and 8 h. The cryomilled powders were then consolidated using SPS to produce bulk components. The particle morphology and crystallite size of the powders and the bulk SPS components were analyzed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmission electron microscopy (TEM). The results showed that the crystallite size of pure Al powders decreases with increased cryomilling time. The results also showed that the SPS at elevated temperatures resulted in a slight increase in crystallite size, however, the changes were insignificant. The mechanical properties of the bulk components were determined using a Vickers microhardness tester. The hardness of the cryomilled SPS component was determined to be three times higher than that of the unmilled SPS component. The mechanism for the reduction in crystallite size with increasing cryomilling time is discussed. This fundamental study provides an insight into the development of bulk nanomaterials with superior mechanical properties for automotive, aerospace, marine, and nuclear applications.

4 October 2024 in Journal of Material Cycles and Waste Management
Verified
Journal Article
Closed access
PDF file
MIMd Shariful Islam
Md Shariful Islam
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
Mano MisraMano Misra
Mano Misra

19 August 2022
Verified
Book Chapter
Closed access
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
HRHafizur Rahman
Hafizur Rahman
DHDavid Hart
David Hart
BHBranden Hughes
Branden Hughes
DSDiego Armando Saldana
Diego Armando Saldana
PMPradeep L. Menezes
Pradeep L. Menezes

15 October 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
Amanendra K. KushwahaAmanendra K. Kushwaha
Amanendra K. Kushwaha
Mano MisraMano Misra
Mano Misra
Pradeep MenezesPradeep Menezes
Pradeep Menezes
In the current study, pure aluminum (Al) powders were cryomilled with and without 3 wt.% pure magnesium (Mg) dopant for varying durations followed by spark plasma sintering (SPS) of powders to prepare bulk components with superior mechanical properties. The crystallite sizes were determined for powders and the bulk components by analyzing the X-ray diffraction (XRD) spectrum. The calculations indicated a reduction in crystallite size with the increase in the cryomilling duration. The results also showed a more significant decrease in the crystallite sizes for Al-3Mg samples than that of pure Al. The changes in the surface morphology of powders were characterized using scanning electron microscopy (SEM). The elemental mapping analysis at nanoscale was carried out using Energy-dispersive X-ray spectroscopy (EDX) in Scanning transmission electron microscopy (STEM). The mechanical properties of the bulk components were assessed using a Vickers Microhardness tester. The test results demonstrated an improvement in the hardness of Mg-doped components. Higher hardness values were also reported with an increase in the cryomilling duration. This article discusses the mechanisms for the reduction in crystallite size for pure Al and Al-3Mg and its subsequent impact on improving mechanical properties.