Different practical applications have emerged in the last few years, requiring periodic and detailed inspections to verify possible structural changes. Inspections using Unmanned Aerial Vehicles (UAVs) should minimize flight time due to battery time restrictions and identify the terrain’s topographic features. In this sense, Coverage Path Planning (CPP) aims at finding the best path to coverage of a determined area respecting the operation’s restrictions. Photometric information from the terrain is used to create routes or even refine paths already created. Therefore, this research’s main contribution is developing a methodology that uses a metaheuristic algorithm based on point cloud data to inspect slope and dams structures. The technique was applied in a simulated and real scenario to verify its effectiveness. The results showed an increasing 3D reconstructions’ quality observing optimizing photometric and mission time criteria.

Unmanned aerial vehicle (UAV) applications have evolved to a wide range of fields in the last decade. One of the main challenges in autonomous tasks is the UAV stability during maneuvers. Thus, attitude and position control play a crucial role in stabilizing the vehicle in the desired orientation and path. Many control techniques have been developed for this. However, proportional integral derivative (PID) controllers are often used due their structure and efficiency. Despite PID’s good performance, different requirements may be present at different mission stages. The main contribution of this research work is the development of a novel strategy based on a fuzzy-gain scheduling mechanism to adjust the PID controller to stabilize both position and altitude. This control strategy must be effective, simple, and robust to uncertainties and external disturbances. The Robot Operating System (ROS) integrates the proposed system and the flight control unit. The obtained results showed that the proposed approach was successfully applied to the trajectory tracking and revealed a good performance compared to conventional PID and in the presence of noises. In the tests, the position controller was only affected when the altitude error was higher, with an error of 2% lower.

Unmanned aerial vehicles (UAVs) are a relatively new technology. Their application can often involve complex and unseen problems. For instance, they can work in a cooperative-based environment under the supervision of a ground station to speed up critical decision-making processes. However, the amount of information exchanged among the aircraft and ground station is limited by high distances, low bandwidth size, restricted processing capability, and energy constraints. These drawbacks restrain large-scale operations such as large area inspections. New distributed state-of-the-art processing architectures, such as fog computing, can improve latency, scalability, and efficiency to meet time constraints via data acquisition, processing, and storage at different levels. Under these amendments, this research work proposes a mathematical model to analyze distribution-based UAVs topologies and a fog-cloud computing framework for large-scale mission and search operations. The tests have successfully predicted latency and other operational constraints, allowing the analysis of fog-computing advantages over traditional cloud-computing architectures.

Path planning is one of the most important issues in the robotics field, being applied in many domains ranging from aerospace technology and military tasks to manufacturing and agriculture. Path planning is a branch of autonomous navigation. In autonomous navigation, dynamic decisions about the path have to be taken while the robot moves towards its goal. Among the navigation area, an important class of problems is Coverage Path Planning (CPP). The CPP technique is associated with determining a collision-free path that passes through all viewpoints in a specific area. This paper presents a method to perform CPP in 3D environment for Unmanned Aerial Vehicles (UAVs) applications, namely 3D dynamic for CPP applications (3DD-CPP). The proposed method can be deployed in an unknown environment through a combination of linear optimization and heuristics. A model to estimate cost matrices accounting for UAV power usage is proposed and evaluated for a few different flight speeds. As linear optimization methods can be computationally demanding to be used on-board a UAV, this work also proposes a distributed execution of the algorithm through fog-edge computing. Results showed that 3DD-CPP had a good performance in both local execution and fog-edge for different simulated scenarios. The proposed heuristic is capable of re-optimization, enabling execution in environments with local knowledge of the environments.

Big construction enterprises, such as electrical power generation dams and mining slopes, demand continuous visual inspections. The sizes of these structures and the necessary level of detail in each mission requires a conflicting set of multi-objective goals, such as performance, quality, and safety. It is challenging for human operators, or simple autonomous path-following drones, to process all this information, and thus, it is common that a mission must be repeated several times until it succeeds. This paper deals with this problem by developing a new cognitive architecture based on a collaborative environment between the unmanned aerial vehicles (UAVs) and other agents focusing on optimizing the data gathering, information processing, and decision-making. The proposed architecture breaks the problem into independent units ranging from sensors and actuators up to high-level intelligence processes. It organizes the structures into data and information; each agent may request an individual behavior from the system. To deal with conflicting behaviors, a supervisory agent analyzes all requests and defines the final planning. This architecture enables real-time decision-making with intelligent social behavior among the agents. Thus, it is possible to process and make decisions about the best way to accomplish the mission. To present the methodology, slope inspection scenarios are shown.

SUMMARY: Efficient algorithm integration is a key issue in aerial robotics. However, only a few integration solutions rely on a cognitive approach. Cognitive approaches break down complex problems into independent units that may deal with progressively lower-level data interfaces, all the way down to sensors and actuators. A cognitive architecture defines information flow among units to produce emergent intelligent behavior. Despite the improvements in autonomous decision-making, several key issues remain open. One of these issues is the selection, coordination, and decision-making related to the several specialized tasks required for fulfilling mission objectives. This work addresses decision-making for the cognitive unmanned-aerial-vehicle architecture coined as ARCog. The proposed architecture lays the groundwork for the development of a software platform aligned with the requirements of the state-of-the-art technology in the field. The system is designed to provide high-level decision-making. Experiments prove that ARCog works correctly in its target scenario.